lkml.org 
[lkml]   [2022]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 11/18] clk: qcom: krait-cc: force sec_mux to QSB
Date
Now that we have converted every driver to parent_data, it was
notice that the bootloader can't really leave the system in a
strange state where l2 or the cpu0/1 can be sourced in a number of ways
for example cpu1 sourcing out of qsb, l2 sourcing out of pxo.
To correctly reset the mux and the HFPLL force the sec_mux to QSB.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
drivers/clk/qcom/krait-cc.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c
index 5f98ee1c3681..299eb4c81d96 100644
--- a/drivers/clk/qcom/krait-cc.c
+++ b/drivers/clk/qcom/krait-cc.c
@@ -15,6 +15,8 @@

#include "clk-krait.h"

+#define QSB_RATE 1
+
static unsigned int sec_mux_map[] = {
2,
0,
@@ -181,6 +183,13 @@ krait_add_sec_mux(struct device *dev, struct clk *qsb, int id,
if (ret)
clk = ERR_PTR(ret);

+ /*
+ * Force the sec_mux to be set to QSB rate.
+ * This is needed to correctly set the parents and
+ * to later reset mux and HFPLL to a known freq.
+ */
+ clk_set_rate(clk, QSB_RATE);
+
err_clk:
if (unique_aux)
kfree(parent_name);
@@ -378,7 +387,7 @@ static int krait_cc_probe(struct platform_device *pdev)
*/
cur_rate = clk_get_rate(l2_pri_mux_clk);
aux_rate = 384000000;
- if (cur_rate == 1) {
+ if (cur_rate == QSB_RATE) {
dev_info(dev, "L2 @ QSB rate. Forcing new rate.\n");
cur_rate = aux_rate;
}
@@ -389,7 +398,7 @@ static int krait_cc_probe(struct platform_device *pdev)
for_each_possible_cpu(cpu) {
clk = clks[cpu];
cur_rate = clk_get_rate(clk);
- if (cur_rate == 1) {
+ if (cur_rate == QSB_RATE) {
dev_info(dev, "CPU%d @ QSB rate. Forcing new rate.\n", cpu);
cur_rate = aux_rate;
}
--
2.34.1
\
 
 \ /
  Last update: 2022-03-21 17:10    [W:0.168 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site