lkml.org 
[lkml]   [2022]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 16/18] ARM: dts: qcom: qcom-ipq8064: add missing krait-cc compatible and clocks
Date
Add missing krait-cc clock-controller and define missing aux clock for
CPUs. Also change phandle for l2cc node to point to pxo_board instead
of gcc PXO_SRC.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
arch/arm/boot/dts/qcom-ipq8064.dtsi | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 996f4458d9fc..888f17d64283 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -468,11 +468,19 @@ IRQ_TYPE_EDGE_RISING)>,
acc0: clock-controller@2088000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+ clock-output-names = "acpu0_aux";
+ clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+ clock-names = "pll8_vote", "pxo";
+ #clock-cells = <0>;
};

acc1: clock-controller@2098000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+ clock-output-names = "acpu1_aux";
+ clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+ clock-names = "pll8_vote", "pxo";
+ #clock-cells = <0>;
};

adm_dma: dma-controller@18300000 {
@@ -782,11 +790,21 @@ tcsr: syscon@1a400000 {
l2cc: clock-controller@2011000 {
compatible = "qcom,kpss-gcc", "syscon";
reg = <0x2011000 0x1000>;
- clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>;
+ clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
clock-names = "pll8_vote", "pxo";
clock-output-names = "acpu_l2_aux";
};

+ kraitcc: clock-controller {
+ compatible = "qcom,krait-cc-v1";
+ clocks = <&gcc PLL9>, <&gcc PLL10>, <&gcc PLL12>,
+ <&acc0>, <&acc1>, <&l2cc>, <&qsb>;
+ clock-names = "hfpll0", "hfpll1", "hfpll_l2",
+ "acpu0_aux", "acpu1_aux", "acpu_l2_aux",
+ "qsb";
+ #clock-cells = <1>;
+ };
+
lcc: clock-controller@28000000 {
compatible = "qcom,lcc-ipq8064";
reg = <0x28000000 0x1000>;
--
2.34.1
\
 
 \ /
  Last update: 2022-03-21 16:20    [W:0.121 / U:1.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site