lkml.org 
[lkml]   [2022]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] drivers: pwm: pwm-cros-ec: add channel type support
Date
Add support for EC_PWM_TYPE_DISPLAY_LIGHT and EC_PWM_TYPE_KB_LIGHT pwm
types to the PWM cros_ec_pwm driver. This allows specifying one of these
PWM channel by functionality, and let the EC firmware pick the correct
channel, thus abstracting the hardware implementation from the kernel
driver.

Signed-off-by: Fabio Baltieri <fabiobaltieri@chromium.org>
---
drivers/pwm/pwm-cros-ec.c | 80 +++++++++++++++++++++++++++++++--------
1 file changed, 65 insertions(+), 15 deletions(-)

diff --git a/drivers/pwm/pwm-cros-ec.c b/drivers/pwm/pwm-cros-ec.c
index 5e29d9c682c3..77867fd16c49 100644
--- a/drivers/pwm/pwm-cros-ec.c
+++ b/drivers/pwm/pwm-cros-ec.c
@@ -12,17 +12,21 @@
#include <linux/pwm.h>
#include <linux/slab.h>

+#include <dt-bindings/mfd/cros_ec.h>
+
/**
* struct cros_ec_pwm_device - Driver data for EC PWM
*
* @dev: Device node
* @ec: Pointer to EC device
* @chip: PWM controller chip
+ * @use_pwm_type: Use PWM types instead of generic channels
*/
struct cros_ec_pwm_device {
struct device *dev;
struct cros_ec_device *ec;
struct pwm_chip chip;
+ bool use_pwm_type;
};

/**
@@ -58,14 +62,31 @@ static void cros_ec_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
kfree(channel);
}

-static int cros_ec_pwm_set_duty(struct cros_ec_device *ec, u8 index, u16 duty)
+static int cros_ec_dt_type_to_pwm_type(u8 dt_index, u8 *pwm_type)
{
+ switch (dt_index) {
+ case CROS_EC_PWM_DT_KB_LIGHT:
+ *pwm_type = EC_PWM_TYPE_KB_LIGHT;
+ return 0;
+ case CROS_EC_PWM_DT_DISPLAY_LIGHT:
+ *pwm_type = EC_PWM_TYPE_DISPLAY_LIGHT;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int cros_ec_pwm_set_duty(struct cros_ec_pwm_device *ec_pwm, u8 index,
+ u16 duty)
+{
+ struct cros_ec_device *ec = ec_pwm->ec;
struct {
struct cros_ec_command msg;
struct ec_params_pwm_set_duty params;
} __packed buf;
struct ec_params_pwm_set_duty *params = &buf.params;
struct cros_ec_command *msg = &buf.msg;
+ int ret;

memset(&buf, 0, sizeof(buf));

@@ -75,14 +96,25 @@ static int cros_ec_pwm_set_duty(struct cros_ec_device *ec, u8 index, u16 duty)
msg->outsize = sizeof(*params);

params->duty = duty;
- params->pwm_type = EC_PWM_TYPE_GENERIC;
- params->index = index;
+
+ if (ec_pwm->use_pwm_type) {
+ ret = cros_ec_dt_type_to_pwm_type(index, &params->pwm_type);
+ if (ret) {
+ dev_err(ec->dev, "Invalid PWM type index: %d\n", index);
+ return ret;
+ }
+ params->index = 0;
+ } else {
+ params->pwm_type = EC_PWM_TYPE_GENERIC;
+ params->index = index;
+ }

return cros_ec_cmd_xfer_status(ec, msg);
}

-static int cros_ec_pwm_get_duty(struct cros_ec_device *ec, u8 index)
+static int cros_ec_pwm_get_duty(struct cros_ec_pwm_device *ec_pwm, u8 index)
{
+ struct cros_ec_device *ec = ec_pwm->ec;
struct {
struct cros_ec_command msg;
union {
@@ -102,8 +134,17 @@ static int cros_ec_pwm_get_duty(struct cros_ec_device *ec, u8 index)
msg->insize = sizeof(*resp);
msg->outsize = sizeof(*params);

- params->pwm_type = EC_PWM_TYPE_GENERIC;
- params->index = index;
+ if (ec_pwm->use_pwm_type) {
+ ret = cros_ec_dt_type_to_pwm_type(index, &params->pwm_type);
+ if (ret) {
+ dev_err(ec->dev, "Invalid PWM type index: %d\n", index);
+ return ret;
+ }
+ params->index = 0;
+ } else {
+ params->pwm_type = EC_PWM_TYPE_GENERIC;
+ params->index = index;
+ }

ret = cros_ec_cmd_xfer_status(ec, msg);
if (ret < 0)
@@ -133,7 +174,7 @@ static int cros_ec_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
*/
duty_cycle = state->enabled ? state->duty_cycle : 0;

- ret = cros_ec_pwm_set_duty(ec_pwm->ec, pwm->hwpwm, duty_cycle);
+ ret = cros_ec_pwm_set_duty(ec_pwm, pwm->hwpwm, duty_cycle);
if (ret < 0)
return ret;

@@ -149,7 +190,7 @@ static void cros_ec_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
struct cros_ec_pwm *channel = pwm_get_chip_data(pwm);
int ret;

- ret = cros_ec_pwm_get_duty(ec_pwm->ec, pwm->hwpwm);
+ ret = cros_ec_pwm_get_duty(ec_pwm, pwm->hwpwm);
if (ret < 0) {
dev_err(chip->dev, "error getting initial duty: %d\n", ret);
return;
@@ -204,13 +245,13 @@ static const struct pwm_ops cros_ec_pwm_ops = {
* of PWMs it supports directly, so we have to read the pwm duty cycle for
* subsequent channels until we get an error.
*/
-static int cros_ec_num_pwms(struct cros_ec_device *ec)
+static int cros_ec_num_pwms(struct cros_ec_pwm_device *ec_pwm)
{
int i, ret;

/* The index field is only 8 bits */
for (i = 0; i <= U8_MAX; i++) {
- ret = cros_ec_pwm_get_duty(ec, i);
+ ret = cros_ec_pwm_get_duty(ec_pwm, i);
/*
* We look for SUCCESS, INVALID_COMMAND, or INVALID_PARAM
* responses; everything else is treated as an error.
@@ -251,17 +292,26 @@ static int cros_ec_pwm_probe(struct platform_device *pdev)
chip = &ec_pwm->chip;
ec_pwm->ec = ec;

+ ec_pwm->use_pwm_type = of_property_read_bool(
+ dev->of_node, "google,use_pwm_type");
+
/* PWM chip */
chip->dev = dev;
chip->ops = &cros_ec_pwm_ops;
chip->of_xlate = cros_ec_pwm_xlate;
chip->of_pwm_n_cells = 1;
- ret = cros_ec_num_pwms(ec);
- if (ret < 0) {
- dev_err(dev, "Couldn't find PWMs: %d\n", ret);
- return ret;
+
+ if (ec_pwm->use_pwm_type) {
+ chip->npwm = CROS_EC_PWM_DT_COUNT;
+ } else {
+ ret = cros_ec_num_pwms(ec_pwm);
+ if (ret < 0) {
+ dev_err(dev, "Couldn't find PWMs: %d\n", ret);
+ return ret;
+ }
+ chip->npwm = ret;
}
- chip->npwm = ret;
+
dev_dbg(dev, "Probed %u PWMs\n", chip->npwm);

ret = pwmchip_add(chip);
--
2.35.1.894.gb6a874cedc-goog
\
 
 \ /
  Last update: 2022-03-21 15:34    [W:0.598 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site