lkml.org 
[lkml]   [2022]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 45/57] crypto: qcom-rng - ensure buffer for generate is completely filled
Date
From: Brian Masney <bmasney@redhat.com>

commit a680b1832ced3b5fa7c93484248fd221ea0d614b upstream.

The generate function in struct rng_alg expects that the destination
buffer is completely filled if the function returns 0. qcom_rng_read()
can run into a situation where the buffer is partially filled with
randomness and the remaining part of the buffer is zeroed since
qcom_rng_generate() doesn't check the return value. This issue can
be reproduced by running the following from libkcapi:

kcapi-rng -b 9000000 > OUTFILE

The generated OUTFILE will have three huge sections that contain all
zeros, and this is caused by the code where the test
'val & PRNG_STATUS_DATA_AVAIL' fails.

Let's fix this issue by ensuring that qcom_rng_read() always returns
with a full buffer if the function returns success. Let's also have
qcom_rng_generate() return the correct value.

Here's some statistics from the ent project
(https://www.fourmilab.ch/random/) that shows information about the
quality of the generated numbers:

$ ent -c qcom-random-before
Value Char Occurrences Fraction
0 606748 0.067416
1 33104 0.003678
2 33001 0.003667
...
253 � 32883 0.003654
254 � 33035 0.003671
255 � 33239 0.003693

Total: 9000000 1.000000

Entropy = 7.811590 bits per byte.

Optimum compression would reduce the size
of this 9000000 byte file by 2 percent.

Chi square distribution for 9000000 samples is 9329962.81, and
randomly would exceed this value less than 0.01 percent of the
times.

Arithmetic mean value of data bytes is 119.3731 (127.5 = random).
Monte Carlo value for Pi is 3.197293333 (error 1.77 percent).
Serial correlation coefficient is 0.159130 (totally uncorrelated =
0.0).

Without this patch, the results of the chi-square test is 0.01%, and
the numbers are certainly not random according to ent's project page.
The results improve with this patch:

$ ent -c qcom-random-after
Value Char Occurrences Fraction
0 35432 0.003937
1 35127 0.003903
2 35424 0.003936
...
253 � 35201 0.003911
254 � 34835 0.003871
255 � 35368 0.003930

Total: 9000000 1.000000

Entropy = 7.999979 bits per byte.

Optimum compression would reduce the size
of this 9000000 byte file by 0 percent.

Chi square distribution for 9000000 samples is 258.77, and randomly
would exceed this value 42.24 percent of the times.

Arithmetic mean value of data bytes is 127.5006 (127.5 = random).
Monte Carlo value for Pi is 3.141277333 (error 0.01 percent).
Serial correlation coefficient is 0.000468 (totally uncorrelated =
0.0).

This change was tested on a Nexus 5 phone (msm8974 SoC).

Signed-off-by: Brian Masney <bmasney@redhat.com>
Fixes: ceec5f5b5988 ("crypto: qcom-rng - Add Qcom prng driver")
Cc: stable@vger.kernel.org # 4.19+
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/crypto/qcom-rng.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)

--- a/drivers/crypto/qcom-rng.c
+++ b/drivers/crypto/qcom-rng.c
@@ -7,6 +7,7 @@
#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/crypto.h>
+#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
@@ -42,16 +43,19 @@ static int qcom_rng_read(struct qcom_rng
{
unsigned int currsize = 0;
u32 val;
+ int ret;

/* read random data from hardware */
do {
- val = readl_relaxed(rng->base + PRNG_STATUS);
- if (!(val & PRNG_STATUS_DATA_AVAIL))
- break;
+ ret = readl_poll_timeout(rng->base + PRNG_STATUS, val,
+ val & PRNG_STATUS_DATA_AVAIL,
+ 200, 10000);
+ if (ret)
+ return ret;

val = readl_relaxed(rng->base + PRNG_DATA_OUT);
if (!val)
- break;
+ return -EINVAL;

if ((max - currsize) >= WORD_SZ) {
memcpy(data, &val, WORD_SZ);
@@ -60,11 +64,10 @@ static int qcom_rng_read(struct qcom_rng
} else {
/* copy only remaining bytes */
memcpy(data, &val, max - currsize);
- break;
}
} while (currsize < max);

- return currsize;
+ return 0;
}

static int qcom_rng_generate(struct crypto_rng *tfm,
@@ -86,7 +89,7 @@ static int qcom_rng_generate(struct cryp
mutex_unlock(&rng->lock);
clk_disable_unprepare(rng->clk);

- return 0;
+ return ret;
}

static int qcom_rng_seed(struct crypto_rng *tfm, const u8 *seed,

\
 
 \ /
  Last update: 2022-03-21 15:01    [W:0.822 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site