lkml.org 
[lkml]   [2022]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] arm64: dts: uDPU: update partition table
On Mon, Mar 21, 2022 at 1:41 PM Andrew Lunn <andrew@lunn.ch> wrote:
>
> On Mon, Mar 21, 2022 at 01:17:27PM +0100, Robert Marko wrote:
> > Partition currently called "uboot" does not only contain U-boot, but
> > rather it contains TF-A, U-boot and U-boot environment.
> >
> > So, to avoid accidentally deleting the U-boot environment which is
> > located at 0x180000 split the partition.
> >
> > "uboot" is not the correct name as you can't boot these boards with U-boot
> > only, TF-A must be present as well, so rename the "uboot" partition to
> > "firmware".
>
> Are there any ABI issues here? If these names are being used
> somewhere, you are potentially breaking the boot. At minimum, i would
> like to see something in the commit message which indicates you have
> considered this and why you don't expect it to be a problem.

Hi Andrew, this won't break booting as BootROM does not care about
partitions nor naming, it will just go to 0x0 of the NOR and boot it.

The same renaming had already been done:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch/arm64/boot/dts/marvell?h=v5.17&id=a9d9bfcadfb43b856dbcf9419de75f7420d5a225

I can update the commit message if required.
Regards,
Robert

>
> Andrew



--
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko@sartura.hr
Web: www.sartura.hr

\
 
 \ /
  Last update: 2022-03-21 13:48    [W:0.059 / U:2.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site