lkml.org 
[lkml]   [2022]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[GIT pull] timers/core for v5.18-rc1
Date
Linus,

please pull the latest timers/core branch from:

git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers-core-2022-03-21

up to: b166e52541f2: Merge tag 'timers-v5.18-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core


Timers and timekeeping updates:

Core code:

- Make the NOHZ handling of the timekeeping/tick core more robust to
prevent a rare jiffies update stall.

- Handle softirqs in the NOHZ/idle case correctly

Drivers:

- Add support for event stream scaling of the 1GHz counter on ARM(64)

- Correct an error code check in the timer-of layer

- The usual cleanups and improvements all over the place


Thanks,

tglx

------------------>
Alim Akhtar (3):
clocksource/drivers/exynos_mct: Remove mct interrupt index enum
clocksource/drivers/exynos_mct: Bump up mct max irq number
clocksource/drivers/exynos_mct: Increase the size of name array

Claudiu Beznea (3):
clocksource/drivers/timer-microchip-pit64b: Remove mmio selection
clocksource/drivers/timer-microchip-pit64b: Use notrace
clocksource/drivers/timer-microchip-pit64b: Use 5MHz for clockevent

David Heidelberg (1):
dt-bindings: timer: Tegra: Convert text bindings to yaml

Drew Fustini (1):
clocksource/drivers/timer-ti-dm: Fix regression from errata i940 fix

Frederic Weisbecker (4):
tick: Detect and fix jiffies update stall
tick/rcu: Remove obsolete rcu_needs_cpu() parameters
tick/rcu: Stop allowing RCU_SOFTIRQ in idle
lib/irq_poll: Declare IRQ_POLL softirq vector as ksoftirqd-parking safe

Guillaume Ranquet (1):
clocksource/drivers/timer-of: Check return value of of_iomap in timer_of_base_init()

Krzysztof Kozlowski (1):
clocksource/drivers/exynos_mct: Handle DTS with higher number of interrupts

Marc Zyngier (1):
clocksource/drivers/arm_arch_timer: Use event stream scaling when available

Nathan Chancellor (1):
clocksource/drivers/imx-tpm: Move tpm_read_sched_clock() under CONFIG_ARM

Peng Fan (6):
clocksource/drivers/imx-sysctr: Drop IRQF_IRQPOLL
clocksource/drivers/imx-tpm: Drop IRQF_IRQPOLL
clocksource/drivers/imx-tpm: Mark two variable with __ro_after_init
clocksource/drivers/imx-tpm: Add CLOCK_EVT_FEAT_DYNIRQ
clocksource/drivers/imx-tpm: Update name of clkevt
clocksource/drivers/imx-tpm: Exclude sched clock for ARM64

Waiman Long (1):
clocksource: Add a Kconfig option for WATCHDOG_MAX_SKEW


.../bindings/timer/nvidia,tegra-timer.yaml | 150 +++++++++++++++++++++
.../bindings/timer/nvidia,tegra20-timer.txt | 24 ----
.../bindings/timer/nvidia,tegra210-timer.txt | 36 -----
.../bindings/timer/nvidia,tegra30-timer.txt | 28 ----
arch/arm/boot/dts/dra7-l4.dtsi | 5 +-
arch/arm/boot/dts/dra7.dtsi | 8 +-
drivers/clocksource/Kconfig | 1 -
drivers/clocksource/arm_arch_timer.c | 13 +-
drivers/clocksource/exynos_mct.c | 39 +++---
drivers/clocksource/timer-imx-sysctr.c | 2 +-
drivers/clocksource/timer-imx-tpm.c | 14 +-
drivers/clocksource/timer-microchip-pit64b.c | 8 +-
drivers/clocksource/timer-of.c | 6 +-
drivers/clocksource/timer-ti-dm-systimer.c | 4 +-
include/clocksource/arm_arch_timer.h | 1 +
include/linux/interrupt.h | 11 +-
include/linux/rcutiny.h | 3 +-
include/linux/rcutree.h | 2 +-
kernel/rcu/tree.c | 3 +-
kernel/time/Kconfig | 9 ++
kernel/time/clocksource.c | 8 +-
kernel/time/tick-sched.c | 77 ++++++++---
kernel/time/tick-sched.h | 4 +
23 files changed, 299 insertions(+), 157 deletions(-)
create mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml
delete mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt
delete mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt
delete mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt

diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml
new file mode 100644
index 000000000000..b78209cd0f28
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/timer/nvidia,tegra-timer.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra timer
+
+maintainers:
+ - Stephen Warren <swarren@nvidia.com>
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: nvidia,tegra210-timer
+ then:
+ properties:
+ interrupts:
+ # Either a single combined interrupt or up to 14 individual interrupts
+ minItems: 1
+ maxItems: 14
+ description: >
+ A list of 14 interrupts; one per each timer channels 0 through 13
+
+ - if:
+ properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - nvidia,tegra114-timer
+ - nvidia,tegra124-timer
+ - nvidia,tegra132-timer
+ - const: nvidia,tegra30-timer
+ - items:
+ - const: nvidia,tegra30-timer
+ - const: nvidia,tegra20-timer
+ then:
+ properties:
+ interrupts:
+ # Either a single combined interrupt or up to 6 individual interrupts
+ minItems: 1
+ maxItems: 6
+ description: >
+ A list of 6 interrupts; one per each of timer channels 1 through 5,
+ and one for the shared interrupt for the remaining channels.
+
+ - if:
+ properties:
+ compatible:
+ const: nvidia,tegra20-timer
+ then:
+ properties:
+ interrupts:
+ # Either a single combined interrupt or up to 4 individual interrupts
+ minItems: 1
+ maxItems: 4
+ description: |
+ A list of 4 interrupts; one per timer channel.
+
+properties:
+ compatible:
+ oneOf:
+ - const: nvidia,tegra210-timer
+ description: >
+ The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit
+ timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived
+ from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock
+ (TMR10-TMR13). Each TMR can be programmed to generate one-shot, periodic,
+ or watchdog interrupts.
+ - items:
+ - enum:
+ - nvidia,tegra114-timer
+ - nvidia,tegra124-timer
+ - nvidia,tegra132-timer
+ - const: nvidia,tegra30-timer
+ - items:
+ - const: nvidia,tegra30-timer
+ - const: nvidia,tegra20-timer
+ description: >
+ The Tegra30 timer provides ten 29-bit timer channels, a single 32-bit free
+ running counter, and 5 watchdog modules. The first two channels may also
+ trigger a legacy watchdog reset.
+ - const: nvidia,tegra20-timer
+ description: >
+ The Tegra20 timer provides four 29-bit timer channels and a single 32-bit free
+ running counter. The first two channels may also trigger a watchdog reset.
+
+ reg:
+ maxItems: 1
+
+ interrupts: true
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: timer
+
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ timer@60005000 {
+ compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
+ reg = <0x60005000 0x400>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 41 IRQ_TYPE_LEVEL_HIGH>,
+ <0 42 IRQ_TYPE_LEVEL_HIGH>,
+ <0 121 IRQ_TYPE_LEVEL_HIGH>,
+ <0 122 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car 214>;
+ };
+ - |
+ #include <dt-bindings/clock/tegra210-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ timer@60005000 {
+ compatible = "nvidia,tegra210-timer";
+ reg = <0x60005000 0x400>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_TIMER>;
+ clock-names = "timer";
+ };
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt
deleted file mode 100644
index 4a864bd10d3d..000000000000
--- a/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-NVIDIA Tegra20 timer
-
-The Tegra20 timer provides four 29-bit timer channels and a single 32-bit free
-running counter. The first two channels may also trigger a watchdog reset.
-
-Required properties:
-
-- compatible : should be "nvidia,tegra20-timer".
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A list of 4 interrupts; one per timer channel.
-- clocks : Must contain one entry, for the module clock.
- See ../clocks/clock-bindings.txt for details.
-
-Example:
-
-timer {
- compatible = "nvidia,tegra20-timer";
- reg = <0x60005000 0x60>;
- interrupts = <0 0 0x04
- 0 1 0x04
- 0 41 0x04
- 0 42 0x04>;
- clocks = <&tegra_car 132>;
-};
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt
deleted file mode 100644
index 032cda96fe0d..000000000000
--- a/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-NVIDIA Tegra210 timer
-
-The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit
-timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived
-from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock
-(TMR10-TMR13). Each TMR can be programmed to generate one-shot, periodic,
-or watchdog interrupts.
-
-Required properties:
-- compatible : "nvidia,tegra210-timer".
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A list of 14 interrupts; one per each timer channels 0 through
- 13.
-- clocks : Must contain one entry, for the module clock.
- See ../clocks/clock-bindings.txt for details.
-
-timer@60005000 {
- compatible = "nvidia,tegra210-timer";
- reg = <0x0 0x60005000 0x0 0x400>;
- interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA210_CLK_TIMER>;
- clock-names = "timer";
-};
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt
deleted file mode 100644
index 1761f53ee36f..000000000000
--- a/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-NVIDIA Tegra30 timer
-
-The Tegra30 timer provides ten 29-bit timer channels, a single 32-bit free
-running counter, and 5 watchdog modules. The first two channels may also
-trigger a legacy watchdog reset.
-
-Required properties:
-
-- compatible : For Tegra30, must contain "nvidia,tegra30-timer". Otherwise,
- must contain '"nvidia,<chip>-timer", "nvidia,tegra30-timer"' where
- <chip> is tegra124 or tegra132.
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A list of 6 interrupts; one per each of timer channels 1
- through 5, and one for the shared interrupt for the remaining channels.
-- clocks : Must contain one entry, for the module clock.
- See ../clocks/clock-bindings.txt for details.
-
-timer {
- compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
- reg = <0x60005000 0x400>;
- interrupts = <0 0 0x04
- 0 1 0x04
- 0 41 0x04
- 0 42 0x04
- 0 121 0x04
- 0 122 0x04>;
- clocks = <&tegra_car 214>;
-};
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 956a26d52a4c..0a11bacffc1f 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -3482,8 +3482,7 @@ timer14: timer@0 {
ti,timer-pwm;
};
};
-
- target-module@2c000 { /* 0x4882c000, ap 17 02.0 */
+ timer15_target: target-module@2c000 { /* 0x4882c000, ap 17 02.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
reg = <0x2c000 0x4>,
<0x2c010 0x4>;
@@ -3511,7 +3510,7 @@ timer15: timer@0 {
};
};

- target-module@2e000 { /* 0x4882e000, ap 19 14.0 */
+ timer16_target: target-module@2e000 { /* 0x4882e000, ap 19 14.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
reg = <0x2e000 0x4>,
<0x2e010 0x4>;
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 42bff117656c..97ce0c4f1df7 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1339,20 +1339,20 @@ timer@0 {
};

/* Local timers, see ARM architected timer wrap erratum i940 */
-&timer3_target {
+&timer15_target {
ti,no-reset-on-init;
ti,no-idle;
timer@0 {
- assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>;
+ assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
assigned-clock-parents = <&timer_sys_clk_div>;
};
};

-&timer4_target {
+&timer16_target {
ti,no-reset-on-init;
ti,no-idle;
timer@0 {
- assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>;
+ assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
assigned-clock-parents = <&timer_sys_clk_div>;
};
};
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index cfb8ea0df3b1..1ea556e75494 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -713,7 +713,6 @@ config INGENIC_OST
config MICROCHIP_PIT64B
bool "Microchip PIT64B support"
depends on OF || COMPILE_TEST
- select CLKSRC_MMIO
select TIMER_OF
help
This option enables Microchip PIT64B timer for Atmel
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 1ecd52f903b8..9ab8221ee3c6 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -880,10 +880,19 @@ static void __arch_timer_setup(unsigned type,
clockevents_config_and_register(clk, arch_timer_rate, 0xf, max_delta);
}

-static void arch_timer_evtstrm_enable(int divider)
+static void arch_timer_evtstrm_enable(unsigned int divider)
{
u32 cntkctl = arch_timer_get_cntkctl();

+#ifdef CONFIG_ARM64
+ /* ECV is likely to require a large divider. Use the EVNTIS flag. */
+ if (cpus_have_const_cap(ARM64_HAS_ECV) && divider > 15) {
+ cntkctl |= ARCH_TIMER_EVT_INTERVAL_SCALE;
+ divider -= 8;
+ }
+#endif
+
+ divider = min(divider, 15U);
cntkctl &= ~ARCH_TIMER_EVT_TRIGGER_MASK;
/* Set the divider and enable virtual event stream */
cntkctl |= (divider << ARCH_TIMER_EVT_TRIGGER_SHIFT)
@@ -912,7 +921,7 @@ static void arch_timer_configure_evtstream(void)
lsb++;

/* enable event stream */
- arch_timer_evtstrm_enable(max(0, min(lsb, 15)));
+ arch_timer_evtstrm_enable(max(0, lsb));
}

static void arch_counter_set_user_access(void)
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 6db3d5511b0f..f29c812b70c9 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -60,27 +60,18 @@
#define MCT_CLKEVENTS_RATING 350
#endif

+/* There are four Global timers starting with 0 offset */
+#define MCT_G0_IRQ 0
+/* Local timers count starts after global timer count */
+#define MCT_L0_IRQ 4
+/* Max number of IRQ as per DT binding document */
+#define MCT_NR_IRQS 20
+
enum {
MCT_INT_SPI,
MCT_INT_PPI
};

-enum {
- MCT_G0_IRQ,
- MCT_G1_IRQ,
- MCT_G2_IRQ,
- MCT_G3_IRQ,
- MCT_L0_IRQ,
- MCT_L1_IRQ,
- MCT_L2_IRQ,
- MCT_L3_IRQ,
- MCT_L4_IRQ,
- MCT_L5_IRQ,
- MCT_L6_IRQ,
- MCT_L7_IRQ,
- MCT_NR_IRQS,
-};
-
static void __iomem *reg_base;
static unsigned long clk_rate;
static unsigned int mct_int_type;
@@ -89,7 +80,11 @@ static int mct_irqs[MCT_NR_IRQS];
struct mct_clock_event_device {
struct clock_event_device evt;
unsigned long base;
- char name[10];
+ /**
+ * The length of the name must be adjusted if number of
+ * local timer interrupts grow over two digits
+ */
+ char name[11];
};

static void exynos4_mct_write(unsigned int value, unsigned long offset)
@@ -541,6 +536,11 @@ static int __init exynos4_timer_interrupts(struct device_node *np,
* irqs are specified.
*/
nr_irqs = of_irq_count(np);
+ if (nr_irqs > ARRAY_SIZE(mct_irqs)) {
+ pr_err("exynos-mct: too many (%d) interrupts configured in DT\n",
+ nr_irqs);
+ nr_irqs = ARRAY_SIZE(mct_irqs);
+ }
for (i = MCT_L0_IRQ; i < nr_irqs; i++)
mct_irqs[i] = irq_of_parse_and_map(np, i);

@@ -553,11 +553,14 @@ static int __init exynos4_timer_interrupts(struct device_node *np,
mct_irqs[MCT_L0_IRQ], err);
} else {
for_each_possible_cpu(cpu) {
- int mct_irq = mct_irqs[MCT_L0_IRQ + cpu];
+ int mct_irq;
struct mct_clock_event_device *pcpu_mevt =
per_cpu_ptr(&percpu_mct_tick, cpu);

pcpu_mevt->evt.irq = -1;
+ if (MCT_L0_IRQ + cpu >= ARRAY_SIZE(mct_irqs))
+ break;
+ mct_irq = mct_irqs[MCT_L0_IRQ + cpu];

irq_set_status_flags(mct_irq, IRQ_NOAUTOEN);
if (request_irq(mct_irq,
diff --git a/drivers/clocksource/timer-imx-sysctr.c b/drivers/clocksource/timer-imx-sysctr.c
index 55a8e198d2a1..523e37662a6e 100644
--- a/drivers/clocksource/timer-imx-sysctr.c
+++ b/drivers/clocksource/timer-imx-sysctr.c
@@ -110,7 +110,7 @@ static struct timer_of to_sysctr = {
},
.of_irq = {
.handler = sysctr_timer_interrupt,
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
+ .flags = IRQF_TIMER,
},
.of_clk = {
.name = "per",
diff --git a/drivers/clocksource/timer-imx-tpm.c b/drivers/clocksource/timer-imx-tpm.c
index 2cdc077a39f5..bd64a8a8427f 100644
--- a/drivers/clocksource/timer-imx-tpm.c
+++ b/drivers/clocksource/timer-imx-tpm.c
@@ -32,8 +32,8 @@
#define TPM_C0SC_CHF_MASK (0x1 << 7)
#define TPM_C0V 0x24

-static int counter_width;
-static void __iomem *timer_base;
+static int counter_width __ro_after_init;
+static void __iomem *timer_base __ro_after_init;

static inline void tpm_timer_disable(void)
{
@@ -73,12 +73,12 @@ static unsigned long tpm_read_current_timer(void)
{
return tpm_read_counter();
}
-#endif

static u64 notrace tpm_read_sched_clock(void)
{
return tpm_read_counter();
}
+#endif

static int tpm_set_next_event(unsigned long delta,
struct clock_event_device *evt)
@@ -127,9 +127,9 @@ static irqreturn_t tpm_timer_interrupt(int irq, void *dev_id)
static struct timer_of to_tpm = {
.flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
.clkevt = {
- .name = "i.MX7ULP TPM Timer",
+ .name = "i.MX TPM Timer",
.rating = 200,
- .features = CLOCK_EVT_FEAT_ONESHOT,
+ .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ,
.set_state_shutdown = tpm_set_state_shutdown,
.set_state_oneshot = tpm_set_state_oneshot,
.set_next_event = tpm_set_next_event,
@@ -137,7 +137,7 @@ static struct timer_of to_tpm = {
},
.of_irq = {
.handler = tpm_timer_interrupt,
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
+ .flags = IRQF_TIMER,
},
.of_clk = {
.name = "per",
@@ -150,10 +150,10 @@ static int __init tpm_clocksource_init(void)
tpm_delay_timer.read_current_timer = &tpm_read_current_timer;
tpm_delay_timer.freq = timer_of_rate(&to_tpm) >> 3;
register_current_timer_delay(&tpm_delay_timer);
-#endif

sched_clock_register(tpm_read_sched_clock, counter_width,
timer_of_rate(&to_tpm) >> 3);
+#endif

return clocksource_mmio_init(timer_base + TPM_CNT,
"imx-tpm",
diff --git a/drivers/clocksource/timer-microchip-pit64b.c b/drivers/clocksource/timer-microchip-pit64b.c
index cfa4ec7ef396..abce83d2f00b 100644
--- a/drivers/clocksource/timer-microchip-pit64b.c
+++ b/drivers/clocksource/timer-microchip-pit64b.c
@@ -42,8 +42,7 @@
#define MCHP_PIT64B_LSBMASK GENMASK_ULL(31, 0)
#define MCHP_PIT64B_PRES_TO_MODE(p) (MCHP_PIT64B_MR_PRES & ((p) << 8))
#define MCHP_PIT64B_MODE_TO_PRES(m) ((MCHP_PIT64B_MR_PRES & (m)) >> 8)
-#define MCHP_PIT64B_DEF_CS_FREQ 5000000UL /* 5 MHz */
-#define MCHP_PIT64B_DEF_CE_FREQ 32768 /* 32 KHz */
+#define MCHP_PIT64B_DEF_FREQ 5000000UL /* 5 MHz */

#define MCHP_PIT64B_NAME "pit64b"

@@ -165,7 +164,7 @@ static u64 mchp_pit64b_clksrc_read(struct clocksource *cs)
return mchp_pit64b_cnt_read(mchp_pit64b_cs_base);
}

-static u64 mchp_pit64b_sched_read_clk(void)
+static u64 notrace mchp_pit64b_sched_read_clk(void)
{
return mchp_pit64b_cnt_read(mchp_pit64b_cs_base);
}
@@ -418,7 +417,6 @@ static int __init mchp_pit64b_init_clkevt(struct mchp_pit64b_timer *timer,
static int __init mchp_pit64b_dt_init_timer(struct device_node *node,
bool clkevt)
{
- u32 freq = clkevt ? MCHP_PIT64B_DEF_CE_FREQ : MCHP_PIT64B_DEF_CS_FREQ;
struct mchp_pit64b_timer timer;
unsigned long clk_rate;
u32 irq = 0;
@@ -446,7 +444,7 @@ static int __init mchp_pit64b_dt_init_timer(struct device_node *node,
}

/* Initialize mode (prescaler + SGCK bit). To be used at runtime. */
- ret = mchp_pit64b_init_mode(&timer, freq);
+ ret = mchp_pit64b_init_mode(&timer, MCHP_PIT64B_DEF_FREQ);
if (ret)
goto irq_unmap;

diff --git a/drivers/clocksource/timer-of.c b/drivers/clocksource/timer-of.c
index 529cc6a51cdb..c3f54d9912be 100644
--- a/drivers/clocksource/timer-of.c
+++ b/drivers/clocksource/timer-of.c
@@ -157,9 +157,9 @@ static __init int timer_of_base_init(struct device_node *np,
of_base->base = of_base->name ?
of_io_request_and_map(np, of_base->index, of_base->name) :
of_iomap(np, of_base->index);
- if (IS_ERR(of_base->base)) {
- pr_err("Failed to iomap (%s)\n", of_base->name);
- return PTR_ERR(of_base->base);
+ if (IS_ERR_OR_NULL(of_base->base)) {
+ pr_err("Failed to iomap (%s:%s)\n", np->name, of_base->name);
+ return of_base->base ? PTR_ERR(of_base->base) : -ENOMEM;
}

return 0;
diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c
index 5c40ca1d4740..f19a1f0bb432 100644
--- a/drivers/clocksource/timer-ti-dm-systimer.c
+++ b/drivers/clocksource/timer-ti-dm-systimer.c
@@ -695,9 +695,9 @@ static int __init dmtimer_percpu_quirk_init(struct device_node *np, u32 pa)
return 0;
}

- if (pa == 0x48034000) /* dra7 dmtimer3 */
+ if (pa == 0x4882c000) /* dra7 dmtimer15 */
return dmtimer_percpu_timer_init(np, 0);
- else if (pa == 0x48036000) /* dra7 dmtimer4 */
+ else if (pa == 0x4882e000) /* dra7 dmtimer16 */
return dmtimer_percpu_timer_init(np, 1);

return 0;
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index e715bdb720d5..057c8964aefb 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -56,6 +56,7 @@ enum arch_timer_spi_nr {
#define ARCH_TIMER_EVT_TRIGGER_MASK (0xF << ARCH_TIMER_EVT_TRIGGER_SHIFT)
#define ARCH_TIMER_USR_VT_ACCESS_EN (1 << 8) /* virtual timer registers */
#define ARCH_TIMER_USR_PT_ACCESS_EN (1 << 9) /* physical timer registers */
+#define ARCH_TIMER_EVT_INTERVAL_SCALE (1 << 17) /* EVNTIS in the ARMv8 ARM */

#define ARCH_TIMER_EVT_STREAM_PERIOD_US 100
#define ARCH_TIMER_EVT_STREAM_FREQ \
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 9367f1cb2e3c..f40754caaefa 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -579,7 +579,16 @@ enum
NR_SOFTIRQS
};

-#define SOFTIRQ_STOP_IDLE_MASK (~(1 << RCU_SOFTIRQ))
+/*
+ * The following vectors can be safely ignored after ksoftirqd is parked:
+ *
+ * _ RCU:
+ * 1) rcutree_migrate_callbacks() migrates the queue.
+ * 2) rcu_report_dead() reports the final quiescent states.
+ *
+ * _ IRQ_POLL: irq_poll_cpu_dead() migrates the queue
+ */
+#define SOFTIRQ_HOTPLUG_SAFE_MASK (BIT(RCU_SOFTIRQ) | BIT(IRQ_POLL_SOFTIRQ))

/* map softirq index to softirq name. update 'softirq_to_name' in
* kernel/softirq.c when adding a new softirq.
diff --git a/include/linux/rcutiny.h b/include/linux/rcutiny.h
index 858f4d429946..5fed476f977f 100644
--- a/include/linux/rcutiny.h
+++ b/include/linux/rcutiny.h
@@ -64,9 +64,8 @@ static inline void rcu_softirq_qs(void)
rcu_tasks_qs(current, (preempt)); \
} while (0)

-static inline int rcu_needs_cpu(u64 basemono, u64 *nextevt)
+static inline int rcu_needs_cpu(void)
{
- *nextevt = KTIME_MAX;
return 0;
}

diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index 53209d669400..6cc91291d078 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -19,7 +19,7 @@

void rcu_softirq_qs(void);
void rcu_note_context_switch(bool preempt);
-int rcu_needs_cpu(u64 basem, u64 *nextevt);
+int rcu_needs_cpu(void);
void rcu_cpu_stall_reset(void);

/*
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index a4c25a6283b0..80faf2273ce9 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -1086,9 +1086,8 @@ void rcu_irq_enter_irqson(void)
* Just check whether or not this CPU has non-offloaded RCU callbacks
* queued.
*/
-int rcu_needs_cpu(u64 basemono, u64 *nextevt)
+int rcu_needs_cpu(void)
{
- *nextevt = KTIME_MAX;
return !rcu_segcblist_empty(&this_cpu_ptr(&rcu_data)->cblist) &&
!rcu_rdp_is_offloaded(this_cpu_ptr(&rcu_data));
}
diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig
index 04bfd62f5e5c..27b7868b5c30 100644
--- a/kernel/time/Kconfig
+++ b/kernel/time/Kconfig
@@ -181,5 +181,14 @@ config HIGH_RES_TIMERS
hardware is not capable then this option only increases
the size of the kernel image.

+config CLOCKSOURCE_WATCHDOG_MAX_SKEW_US
+ int "Clocksource watchdog maximum allowable skew (in μs)"
+ depends on CLOCKSOURCE_WATCHDOG
+ range 50 1000
+ default 100
+ help
+ Specify the maximum amount of allowable watchdog skew in
+ microseconds before reporting the clocksource to be unstable.
+
endmenu
endif
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 1cf73807b450..95d7ca35bdf2 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -107,7 +107,13 @@ static u64 suspend_start;
* This delay could be due to SMIs, NMIs, or to VCPU preemptions. Used as
* a lower bound for cs->uncertainty_margin values when registering clocks.
*/
-#define WATCHDOG_MAX_SKEW (100 * NSEC_PER_USEC)
+#ifdef CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US
+#define MAX_SKEW_USEC CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US
+#else
+#define MAX_SKEW_USEC 100
+#endif
+
+#define WATCHDOG_MAX_SKEW (MAX_SKEW_USEC * NSEC_PER_USEC)

#ifdef CONFIG_CLOCKSOURCE_WATCHDOG
static void clocksource_watchdog_work(struct work_struct *work);
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 17a283ce2b20..2d76c91b85de 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -169,6 +169,8 @@ static ktime_t tick_init_jiffy_update(void)
return period;
}

+#define MAX_STALLED_JIFFIES 5
+
static void tick_sched_do_timer(struct tick_sched *ts, ktime_t now)
{
int cpu = smp_processor_id();
@@ -196,6 +198,21 @@ static void tick_sched_do_timer(struct tick_sched *ts, ktime_t now)
if (tick_do_timer_cpu == cpu)
tick_do_update_jiffies64(now);

+ /*
+ * If jiffies update stalled for too long (timekeeper in stop_machine()
+ * or VMEXIT'ed for several msecs), force an update.
+ */
+ if (ts->last_tick_jiffies != jiffies) {
+ ts->stalled_jiffies = 0;
+ ts->last_tick_jiffies = READ_ONCE(jiffies);
+ } else {
+ if (++ts->stalled_jiffies == MAX_STALLED_JIFFIES) {
+ tick_do_update_jiffies64(now);
+ ts->stalled_jiffies = 0;
+ ts->last_tick_jiffies = READ_ONCE(jiffies);
+ }
+ }
+
if (ts->inidle)
ts->got_idle_tick = 1;
}
@@ -768,7 +785,7 @@ static inline bool local_timer_softirq_pending(void)

static ktime_t tick_nohz_next_event(struct tick_sched *ts, int cpu)
{
- u64 basemono, next_tick, next_tmr, next_rcu, delta, expires;
+ u64 basemono, next_tick, delta, expires;
unsigned long basejiff;
unsigned int seq;

@@ -791,7 +808,7 @@ static ktime_t tick_nohz_next_event(struct tick_sched *ts, int cpu)
* minimal delta which brings us back to this place
* immediately. Lather, rinse and repeat...
*/
- if (rcu_needs_cpu(basemono, &next_rcu) || arch_needs_cpu() ||
+ if (rcu_needs_cpu() || arch_needs_cpu() ||
irq_work_needs_cpu() || local_timer_softirq_pending()) {
next_tick = basemono + TICK_NSEC;
} else {
@@ -802,10 +819,8 @@ static ktime_t tick_nohz_next_event(struct tick_sched *ts, int cpu)
* disabled this also looks at the next expiring
* hrtimer.
*/
- next_tmr = get_next_timer_interrupt(basejiff, basemono);
- ts->next_timer = next_tmr;
- /* Take the next rcu event into account */
- next_tick = next_rcu < next_tmr ? next_rcu : next_tmr;
+ next_tick = get_next_timer_interrupt(basejiff, basemono);
+ ts->next_timer = next_tick;
}

/*
@@ -984,6 +999,45 @@ static void tick_nohz_full_update_tick(struct tick_sched *ts)
__tick_nohz_full_update_tick(ts, ktime_get());
}

+/*
+ * A pending softirq outside an IRQ (or softirq disabled section) context
+ * should be waiting for ksoftirqd to handle it. Therefore we shouldn't
+ * reach here due to the need_resched() early check in can_stop_idle_tick().
+ *
+ * However if we are between CPUHP_AP_SMPBOOT_THREADS and CPU_TEARDOWN_CPU on the
+ * cpu_down() process, softirqs can still be raised while ksoftirqd is parked,
+ * triggering the below since wakep_softirqd() is ignored.
+ *
+ */
+static bool report_idle_softirq(void)
+{
+ static int ratelimit;
+ unsigned int pending = local_softirq_pending();
+
+ if (likely(!pending))
+ return false;
+
+ /* Some softirqs claim to be safe against hotplug and ksoftirqd parking */
+ if (!cpu_active(smp_processor_id())) {
+ pending &= ~SOFTIRQ_HOTPLUG_SAFE_MASK;
+ if (!pending)
+ return false;
+ }
+
+ if (ratelimit < 10)
+ return false;
+
+ /* On RT, softirqs handling may be waiting on some lock */
+ if (!local_bh_blocked())
+ return false;
+
+ pr_warn("NOHZ tick-stop error: local softirq work is pending, handler #%02x!!!\n",
+ pending);
+ ratelimit++;
+
+ return true;
+}
+
static bool can_stop_idle_tick(int cpu, struct tick_sched *ts)
{
/*
@@ -1010,17 +1064,8 @@ static bool can_stop_idle_tick(int cpu, struct tick_sched *ts)
if (need_resched())
return false;

- if (unlikely(local_softirq_pending())) {
- static int ratelimit;
-
- if (ratelimit < 10 && !local_bh_blocked() &&
- (local_softirq_pending() & SOFTIRQ_STOP_IDLE_MASK)) {
- pr_warn("NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #%02x!!!\n",
- (unsigned int) local_softirq_pending());
- ratelimit++;
- }
+ if (unlikely(report_idle_softirq()))
return false;
- }

if (tick_nohz_full_enabled()) {
/*
diff --git a/kernel/time/tick-sched.h b/kernel/time/tick-sched.h
index d952ae393423..504649513399 100644
--- a/kernel/time/tick-sched.h
+++ b/kernel/time/tick-sched.h
@@ -49,6 +49,8 @@ enum tick_nohz_mode {
* @timer_expires_base: Base time clock monotonic for @timer_expires
* @next_timer: Expiry time of next expiring timer for debugging purpose only
* @tick_dep_mask: Tick dependency mask - is set, if someone needs the tick
+ * @last_tick_jiffies: Value of jiffies seen on last tick
+ * @stalled_jiffies: Number of stalled jiffies detected across ticks
*/
struct tick_sched {
struct hrtimer sched_timer;
@@ -77,6 +79,8 @@ struct tick_sched {
u64 next_timer;
ktime_t idle_expires;
atomic_t tick_dep_mask;
+ unsigned long last_tick_jiffies;
+ unsigned int stalled_jiffies;
};

extern struct tick_sched *tick_get_tick_sched(int cpu);
\
 
 \ /
  Last update: 2022-03-21 12:04    [W:0.123 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site