lkml.org 
[lkml]   [2022]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 1/2] net: mdio: add reset deassertion for Aspeed MDIO
Date
> -----Original Message-----
> From: Philipp Zabel [mailto:p.zabel@pengutronix.de]
> Sent: 2022年3月21日 4:15 PM
> To: Dylan Hung <dylan_hung@aspeedtech.com>; robh+dt@kernel.org;
> joel@jms.id.au; andrew@aj.id.au; andrew@lunn.ch; hkallweit1@gmail.com;
> linux@armlinux.org.uk; davem@davemloft.net; kuba@kernel.org;
> pabeni@redhat.com; devicetree@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linux-aspeed@lists.ozlabs.org;
> linux-kernel@vger.kernel.org; netdev@vger.kernel.org
> Cc: BMC-SW <BMC-SW@aspeedtech.com>; stable@vger.kernel.org
> Subject: Re: [PATCH 1/2] net: mdio: add reset deassertion for Aspeed MDIO
>
> Hi Dylan,
>
> On Mo, 2022-03-21 at 15:01 +0800, Dylan Hung wrote:
> > Add reset deassertion for Aspeed MDIO.  There are 4 MDIO controllers
> > embedded in Aspeed AST2600 SOC and share one reset control register
> > SCU50[3]. So devm_reset_control_get_shared is used in this change.
> >
> > Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
> > Cc: stable@vger.kernel.org
> > ---
> >  drivers/net/mdio/mdio-aspeed.c | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> >
> > diff --git a/drivers/net/mdio/mdio-aspeed.c b/drivers/net/mdio/mdio-
> > aspeed.c index e2273588c75b..8ac262a12d13 100644
> > --- a/drivers/net/mdio/mdio-aspeed.c
> > +++ b/drivers/net/mdio/mdio-aspeed.c
> > @@ -3,6 +3,7 @@
> >
> >  #include <linux/bitfield.h>
> >  #include <linux/delay.h>
> > +#include <linux/reset.h>
> >  #include <linux/iopoll.h>
> >  #include <linux/mdio.h>
> >  #include <linux/module.h>
> > @@ -37,6 +38,7 @@
> >
> >  struct aspeed_mdio {
> >         void __iomem *base;
> > +       struct reset_control *reset;
> >  };
> >
> >  static int aspeed_mdio_read(struct mii_bus *bus, int addr, int
> > regnum)
> > @@ -120,6 +122,12 @@ static int aspeed_mdio_probe(struct
> > platform_device *pdev)
> >         if (IS_ERR(ctx->base))
> >                 return PTR_ERR(ctx->base);
> >
> > +       ctx->reset = devm_reset_control_get_shared(&pdev->dev, NULL);
>
> The device tree bindings should have a required reset control property
> documented before this is added.
>

OK, I will add a commit for the document in V2.

> > +       if (IS_ERR(ctx->reset))
> > +               return PTR_ERR(ctx->reset);
> > +
> > +       reset_control_deassert(ctx->reset);
> > +
>
> This is missing a corresponding reset_control_assert() in
> aspeed_mdio_remove() and in the error path of of_mdiobus_register().
> That would allow to assert the reset line again after all MDIO controllers are
> unbound.

Thank you for your comment. I will fix it in V2.

>
> regards
> Philipp

--
Dylan
\
 
 \ /
  Last update: 2022-03-21 09:23    [W:0.950 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site