lkml.org 
[lkml]   [2022]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [V3] PCI: fu740: Drop to 2.5GT/s to fix initial device probing on some boards
On Fri, Mar 18, 2022 at 03:24:30PM +0000, Ben Dooks wrote:
> The fu740 PCIe core does not probe any devices on the SiFive Unmatched
> board without this fix (or having U-Boot explicitly start the PCIe via
> either boot-script or user command). The fix is to start the link at
> 2.5GT/s speeds and once the link is up then change the maximum speed back
> to the default.
>
> The U-Boot driver claims to set the link-speed to 2.5GT/s to get the probe
> to work (and U-Boot does print link up at 2.5GT/s) in the following code:
> https://source.denx.de/u-boot/u-boot/-/blob/master/drivers/pci/pcie_dw_sifive.c?id=v2022.01#L271
>
> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>

Lorenzo has an old version of this patch on his pci/fu740 branch.

Since we're now in the merge window, I applied this V3 patch to my
pci/host/fu740 branch so we can try to get this in for v5.18.

> --
> Note, this patch has had significant re-work since the previous 4
> sets, including trying to fix style, message, reliance on the U-Boot
> fix and the comments about usage of LINK_CAP and reserved fields.
>
> v2:
> - fix issues with Gen1/2.5GTs
> - updated comment on the initial probe
> - run tests with both uninitialised and initialsed pcie from uboot
> ---
> drivers/pci/controller/dwc/pcie-fu740.c | 52 ++++++++++++++++++++++++-
> 1 file changed, 51 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-fu740.c b/drivers/pci/controller/dwc/pcie-fu740.c
> index 842b7202b96e..ecac0364178a 100644
> --- a/drivers/pci/controller/dwc/pcie-fu740.c
> +++ b/drivers/pci/controller/dwc/pcie-fu740.c
> @@ -181,10 +181,60 @@ static int fu740_pcie_start_link(struct dw_pcie *pci)
> {
> struct device *dev = pci->dev;
> struct fu740_pcie *afp = dev_get_drvdata(dev);
> + u8 cap_exp = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> + int ret;
> + u32 orig, tmp;
> +
> + /*
> + * Force 2.5GT/s when starting the link, due to some devices not
> + * probing at higher speeds. This happens with the PCIe switch
> + * on the Unmatched board when U-Boot has not initialised the PCIe.
> + * The fix in U-Boot is to force 2.5GT/s, which then gets cleared
> + * by the soft reset does by this driver.
> + */
> +
> + dev_dbg(dev, "cap_exp at %x\n", cap_exp);
> + dw_pcie_dbi_ro_wr_en(pci);
> +
> + tmp = dw_pcie_readl_dbi(pci, cap_exp + PCI_EXP_LNKCAP);
> + orig = tmp & PCI_EXP_LNKCAP_SLS;
> + tmp &= ~PCI_EXP_LNKCAP_SLS;
> + tmp |= PCI_EXP_LNKCAP_SLS_2_5GB;
> + dw_pcie_writel_dbi(pci, cap_exp + PCI_EXP_LNKCAP, tmp);
>
> /* Enable LTSSM */
> writel_relaxed(0x1, afp->mgmt_base + PCIEX8MGMT_APP_LTSSM_ENABLE);
> - return 0;
> +
> + ret = dw_pcie_wait_for_link(pci);
> + if (ret) {
> + dev_err(dev, "error: link did not start\n");
> + goto err;
> + }
> +
> + tmp = dw_pcie_readl_dbi(pci, cap_exp + PCI_EXP_LNKCAP);
> + if ((tmp & PCI_EXP_LNKCAP_SLS) != orig) {
> + dev_dbg(dev, "changing speed back to original\n");
> +
> + tmp &= ~PCI_EXP_LNKCAP_SLS;
> + tmp |= orig;
> + dw_pcie_writel_dbi(pci, cap_exp + PCI_EXP_LNKCAP, tmp);
> +
> + tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
> + tmp |= PORT_LOGIC_SPEED_CHANGE;
> + dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
> +
> + ret = dw_pcie_wait_for_link(pci);
> + if (ret) {
> + dev_err(dev, "error: link did not start at new speed\n");
> + goto err;
> + }
> + }
> +
> + ret = 0;
> +err:
> + WARN_ON(ret); /* we assume that errors will be very rare */
> + dw_pcie_dbi_ro_wr_dis(pci);
> + return ret;
> }
>
> static int fu740_pcie_host_init(struct pcie_port *pp)
> --
> 2.35.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv

\
 
 \ /
  Last update: 2022-03-21 21:30    [W:0.165 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site