lkml.org 
[lkml]   [2022]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v9 net-next 03/11] dt-bindings: net: dsa: dt bindings for microchip lan937x
From
Date
On Sun, 2022-03-20 at 01:49 +0100, Andrew Lunn wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe
>
> > +examples:
>
> > +          port@6 {
> > +            reg = <6>;
> > +            label = "lan5";
> > +            phy-mode = "internal";
> > +            phy-handle = <&t1phy4>;
> > +          };
> > +          port@7 {
> > +            reg = <7>;
> > +            label = "lan3";
> > +            phy-mode = "internal";
> > +            phy-handle = <&t1phy5>;
> > +          };
> > +        };
> > +
> > +        mdio {
>
> ..
>
> > +          t1phy4: ethernet-phy@6{
> > +            reg = <0x6>;
> > +          };
> > +          t1phy5: ethernet-phy@7{
> > +            reg = <0x7>;
> > +          };
>
> I know it is only an example, but the numbering is a little odd here.
>
> Port 6, which is named lan5 using t1phy4 at address 6?
>
> I would be more likely to use t1phy6 instead of t1phy4. And t1phy7
> instead of t1phy5.

>
>         Andrew

Sure, will change it in the next rev as above, Labels are just named to
understand front panel naming.

Prasanna V

\
 
 \ /
  Last update: 2022-03-21 21:20    [W:0.066 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site