lkml.org 
[lkml]   [2022]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 6/6] dt-bindings: pinctrl: convert ocelot-pinctrl to YAML format
Am 2022-03-20 11:54, schrieb Krzysztof Kozlowski:
> On 19/03/2022 21:46, Michael Walle wrote:
>> Convert the ocelot-pinctrl device tree binding to the new YAML format.
>>
>> Additionally to the original binding documentation, add interrupt
>> properties which are optional and already used on several SoCs like
>> SparX-5, Luton, Ocelot and LAN966x but were not documented before.
>>
>> Also, on the sparx5 and the lan966x SoCs there are two items for the
>> reg property.
>>
>> Signed-off-by: Michael Walle <michael@walle.cc>
>> ---
>> .../bindings/pinctrl/mscc,ocelot-pinctrl.txt | 42 -------
>> .../bindings/pinctrl/mscc,ocelot-pinctrl.yaml | 108
>> ++++++++++++++++++
>> 2 files changed, 108 insertions(+), 42 deletions(-)
>> delete mode 100644
>> Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt
>> create mode 100644
>> Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
>>
>> diff --git
>> a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt
>> b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt
>> deleted file mode 100644
>> index 5d84fd299ccf..000000000000
>> ---
>> a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt
>> +++ /dev/null
>> @@ -1,42 +0,0 @@
>> -Microsemi Ocelot pin controller Device Tree Bindings
>> -----------------------------------------------------
>> -
>> -Required properties:
>> - - compatible : Should be "mscc,ocelot-pinctrl",
>> - "mscc,jaguar2-pinctrl", "microchip,sparx5-pinctrl",
>> - "mscc,luton-pinctrl", "mscc,serval-pinctrl",
>> - "microchip,lan966x-pinctrl" or "mscc,servalt-pinctrl"
>> - - reg : Address and length of the register set for the device
>> - - gpio-controller : Indicates this device is a GPIO controller
>> - - #gpio-cells : Must be 2.
>> - The first cell is the pin number and the
>> - second cell specifies GPIO flags, as defined in
>> - <dt-bindings/gpio/gpio.h>.
>> - - gpio-ranges : Range of pins managed by the GPIO controller.
>> -
>> -
>> -The ocelot-pinctrl driver uses the generic pin multiplexing and
>> generic pin
>> -configuration documented in pinctrl-bindings.txt.
>> -
>> -The following generic properties are supported:
>> - - function
>> - - pins
>> -
>> -Example:
>> - gpio: pinctrl@71070034 {
>> - compatible = "mscc,ocelot-pinctrl";
>> - reg = <0x71070034 0x28>;
>> - gpio-controller;
>> - #gpio-cells = <2>;
>> - gpio-ranges = <&gpio 0 0 22>;
>> -
>> - uart_pins: uart-pins {
>> - pins = "GPIO_6", "GPIO_7";
>> - function = "uart";
>> - };
>> -
>> - uart2_pins: uart2-pins {
>> - pins = "GPIO_12", "GPIO_13";
>> - function = "uart2";
>> - };
>> - };
>> diff --git
>> a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
>> b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
>> new file mode 100644
>> index 000000000000..7149a6655623
>> --- /dev/null
>> +++
>> b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
>> @@ -0,0 +1,108 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/mscc,ocelot-pinctrl.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Microsemi Ocelot pin controller
>> +
>> +maintainers:
>> + - Alexandre Belloni <alexandre.belloni@bootlin.com>
>> + - Lars Povlsen <lars.povlsen@microchip.com>
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - microchip,lan966x-pinctrl
>> + - microchip,sparx5-pinctrl
>> + - mscc,jaguar2-pinctrl
>> + - mscc,luton-pinctrl
>> + - mscc,ocelot-pinctrl
>> + - mscc,serval-pinctrl
>> + - mscc,servalt-pinctrl
>> +
>> + reg:
>> + items:
>> + - description: Base address
>> + - description: Extended pin configuration registers
>> + minItems: 1
>> +
>> + gpio-controller: true
>> +
>> + '#gpio-cells':
>> + const: 2
>> +
>> + gpio-ranges: true
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + interrupt-controller: true
>> +
>> + "#interrupt-cells":
>> + const: 2
>
> Thanks for the changes in other files, but I think you did not respond
> to my comments here. Can you address them?

Sorry, I might missunderstood you. They are currently used on all except
on serval and servalt SoCs like described in the updated commit message.
I thought it was clear from the commit message, so I didn't answer your
questions in v2. Or is there something else?

-michael

\
 
 \ /
  Last update: 2022-03-20 12:09    [W:0.066 / U:0.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site