lkml.org 
[lkml]   [2022]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 4/4] power: supply: max17042_battery: read battery properties from device tree
Date
On piątek, 18 marca 2022 09:40:36 CET Krzysztof Kozlowski wrote:
> On 18/03/2022 01:10, Sebastian Krzyszkowiak wrote:
> > So far configuring the gauge was only possible using platform data,
> > with no way to provide the configuration on device tree-based platforms.
> >
> > Change that by looking up the configuration values from monitored-battery
> > property. This is especially useful on models implementing ModelGauge m5
> > EZ
> > algorithm, such as MAX17055, as all the required configuration can be
> > derived from a "simple-battery" DT node there.
> >
> > In order to be able to access power supply framework in get_of_pdata,
> > move devm_power_supply_register earlier in max17042_probe.
> >
> > Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
> > ---
> >
> > drivers/power/supply/max17042_battery.c | 50 +++++++++++++++++++------
> > include/linux/power/max17042_battery.h | 1 +
> > 2 files changed, 40 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/power/supply/max17042_battery.c
> > b/drivers/power/supply/max17042_battery.c index
> > c39250349a1d..4c33565802d5 100644
> > --- a/drivers/power/supply/max17042_battery.c
> > +++ b/drivers/power/supply/max17042_battery.c
> > @@ -937,7 +937,9 @@ max17042_get_of_pdata(struct max17042_chip *chip)
> >
> > struct device *dev = &chip->client->dev;
> > struct device_node *np = dev->of_node;
> > u32 prop;
> >
> > + u64 data64;
> >
> > struct max17042_platform_data *pdata;
> >
> > + struct power_supply_battery_info *info;
> >
> > pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> > if (!pdata)
> >
> > @@ -961,6 +963,32 @@ max17042_get_of_pdata(struct max17042_chip *chip)
> >
> > if (of_property_read_s32(np, "maxim,over-volt", &pdata->vmax))
> >
> > pdata->vmax = INT_MAX;
> >
> > + if (pdata->enable_current_sense &&
> > + power_supply_get_battery_info(chip->battery, &info) == 0) {
> > + pdata->config_data = devm_kzalloc(dev, sizeof(*pdata-
>config_data),
> > GFP_KERNEL); + if (!pdata->config_data)
> > + return NULL;
> > +
> > + if (info->charge_full_design_uah != -EINVAL) {
> > + data64 = (u64)info->charge_full_design_uah *
pdata->r_sns;
> > + do_div(data64, MAX17042_CAPACITY_LSB);
> > + pdata->config_data->design_cap = (u16)data64;
> > + pdata->enable_por_init = true;
> > + }
> > + if (info->charge_term_current_ua != -EINVAL) {
> > + data64 = (u64)info->charge_term_current_ua *
pdata->r_sns;
> > + do_div(data64, MAX17042_CURRENT_LSB);
> > + pdata->config_data->ichgt_term = (u16)data64;
> > + pdata->enable_por_init = true;
> > + }
> > + if (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17055) {
> > + if (info->voltage_max_design_uv > 4250000) {
> > + pdata->config_data->model_cfg =
MAX17055_MODELCFG_VCHG_BIT;
> > + pdata->enable_por_init = true;
> > + }
> > + }
> > + }
> > +
> >
> > return pdata;
> >
> > }
> > #endif
> >
> > @@ -1092,16 +1120,23 @@ static int max17042_probe(struct i2c_client
> > *client,>
> > return -EINVAL;
> >
> > }
> >
> > + i2c_set_clientdata(client, chip);
> > + psy_cfg.drv_data = chip;
> > + psy_cfg.of_node = dev->of_node;
> > +
> > + chip->battery = devm_power_supply_register(&client->dev,
max17042_desc,
> > +
&psy_cfg);
> > + if (IS_ERR(chip->battery)) {
> > + dev_err(&client->dev, "failed: power supply
register\n");
> > + return PTR_ERR(chip->battery);
> > + }
>
> I don't think it is correct. You register power supply, thus making it
> available for system, before configuring most of the data. For short
> time the chip might report to the system bogus results and events.
>
> Instead I think you should split it into two parts - init which happens
> before registering power supply and after.

Simply splitting initialization into two parts won't really help. If you set
capacity, current, Vchg and refresh the model after registering power supply,
you will still end up having a short time window with bogus results. Looking
at other drivers, they seem to deal with it in the same way - they register
the power supply early, before the driver can fully configure the device.

To actually fix the problem with bogus data on init, it seems like we would
either need some support from the power supply framework to notify it when can
it actually start expecting correct data, or have a way to access the battery
information without having to register power supply beforehand.

Since power_supply_get_battery_info doesn't actually seem to depend on
power_supply device at all - it uses psy->dev for devm functions and psy-
>of_node to read the data from - I wonder if it could be split into a function
that only takes an of_node?

Cheers,
Sebastian[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2022-03-20 22:25    [W:0.088 / U:0.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site