lkml.org 
[lkml]   [2022]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] arm64: dts: qcom: sc7280: Configure cts sleep pinctrl to bias-disable for sc7280-idp
From
+Google Reviewers

Hello Reviewers,

We were wondering if you had a chance to review this patch and provide
any comments.

Thank you,

Vijay/



On 2/14/2022 6:33 PM, Vijaya Krishna Nivarthi wrote:
> WLAN rail was leaking power during RBSC/sleep even after turning BT off.
> Change sleep pinctrl configuration to handle same.
>
> Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> index d623d71..de18319 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> @@ -516,10 +516,10 @@
> pins = "gpio28";
> function = "gpio";
> /*
> - * Configure a pull-down on CTS to match the pull of
> - * the Bluetooth module.
> + * Configure a disable on CTS to lower power usage
> + * when BT is turned off.
> */
> - bias-pull-down;
> + bias-disable;
> };
>
> qup_uart7_sleep_rts: qup-uart7-sleep-rts {

\
 
 \ /
  Last update: 2022-03-02 06:38    [W:0.274 / U:0.752 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site