lkml.org 
[lkml]   [2022]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 02/12] powerpc: wiiu: device tree
From
Hi Rob,
Thanks for the review.

On 3/3/22 00:36, Rob Herring wrote:
> On Tue, Mar 1, 2022 at 10:44 PM Ash Logan <ash@heyquark.com> wrote:
>>
>> Add a device tree source file for the Nintendo Wii U video game console.
>
> Test this with 'make W=1 dtbs_checks'.

Does make W=1 ARCH=powerpc wiiu_defconfig dtbs_check seem reasonable? I
ran it, and saw LINT/CHKDT/UPD/SCHEMA/COPY steps, but if I put garbage
in the .dts it gives no warnings.

>>
>> Signed-off-by: Ash Logan <ash@heyquark.com>
>> Co-developed-by: Roberto Van Eeden <rw-r-r-0644@protonmail.com>
>> Signed-off-by: Roberto Van Eeden <rw-r-r-0644@protonmail.com>
>> Co-developed-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
>> Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
>> ---
>> arch/powerpc/boot/dts/wiiu.dts | 327 +++++++++++++++++++++++++++++++++
>> 1 file changed, 327 insertions(+)
>> create mode 100644 arch/powerpc/boot/dts/wiiu.dts
>>
>> diff --git a/arch/powerpc/boot/dts/wiiu.dts b/arch/powerpc/boot/dts/wiiu.dts
>> new file mode 100644
>> index 000000000000..aaf264963f61
>> --- /dev/null
>> +++ b/arch/powerpc/boot/dts/wiiu.dts
>> @@ -0,0 +1,327 @@
>> +// SPDX-License-Identifier: GPL-2.0
>
> What about non-GPL environments?

The other powerpc dts files are all GPL-2.0(-or-later), is there a
preferred license for devicetrees?

>> +/*
>> + * Nintendo Wii U Device Tree Source
>> + *
>> + * Copyright (C) 2022 The linux-wiiu Team
>> + */
>> +
>> +/dts-v1/;
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/input/input.h>
>> +
>> +/ {
>> + model = "nintendo,wiiu";
>> + compatible = "nintendo,wiiu";
>> +
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> +
>> + chosen {
>> + bootargs = "root=/dev/sda1 rootwait";
>> + };
>> +
>> + memory {
>> + device_type = "memory";
>> + reg = <0x00000000 0x02000000 /* MEM1 - 32MiB */
>> + 0x08000000 0x00300000 /* MEM0 - 3MiB */
>> + 0x10000000 0x80000000>; /* MEM2 - 2GiB */
>> + };
>> +
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + /* TODO: Add SMP */
>> + PowerPC,espresso@0 {
>> + device_type = "cpu";
>> + reg = <0>;
>> + clock-frequency = <1243125000>; /* 1.243125GHz */
>> + bus-frequency = <248625000>; /* 248.625MHz core-to-bus 5x */
>> + timebase-frequency = <62156250>; /* 1/4 of the bus clock */
>> + i-cache-size = <32768>; /* 32K icache */
>> + i-cache-line-size = <32>;
>> + i-cache-block-size = <32>;
>> + i-cache-sets = <128>;
>> + d-cache-size = <32768>; /* 32K dcache */
>> + d-cache-line-size = <32>;
>> + d-cache-block-size = <32>;
>> + d-cache-sets = <128>;
>> + next-level-cache = <&L2_0>;
>> + L2_0:l2-cache {
>> + compatible = "cache";
>> + cache-level = <2>;
>> + cache-unified;
>> + cache-size = <0x80000>; /* 512KB L2 */
>> + cache-line-size = <64>;
>> + cache-block-size = <32>;
>> + cache-sets = <2048>;
>> + };
>> + };
>> + };
>> +
>> + latte {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + compatible = "nintendo,latte";
>> + ranges = <0x0c000000 0x0c000000 0x00400000 /* Espresso-only registers */
>> + 0x0d000000 0x0d000000 0x00200000 /* Latte AHB deivces */
>> + 0x0d800000 0x0d800000 0x00800000>; /* Latte SoC registers */
>> +
>> + gpu7@c200000 {
>
> gpu@...
>
>> + compatible = "nintendo,latte-gpu7";
>> + reg = <0x0c200000 0x80000>;
>> + interrupts = <2>;
>> + interrupt-parent = <&espresso_pic>;
>> + };
>> +
>> + espresso_pic: pic@c000078 {
>> + #interrupt-cells = <1>;
>> + interrupt-controller;
>> +
>> + compatible = "nintendo,espresso-pic";
>> + reg = <0x0c000078 0x18>;
>> + };
>> +
>> + latte_dsp: dsp@c005000 {
>> + compatible = "nintendo,latte-dsp";
>> + reg = <0x0c005000 0x200>;
>> + };
>> +
>> + ehci_0: usb@d040000 {
>> + compatible = "nintendo,latte-usb-ehci", "usb-ehci";
>> + reg = <0x0d040000 0x100>;
>> + interrupts = <4>;
>> + interrupt-parent = <&latte_pic>;
>> + big-endian-regs;
>> + };
>> +
>> + ohci_0_0: usb@d050000 {
>> + compatible = "nintendo,latte-usb-ohci";
>> + reg = <0x0d050000 0x100>;
>> + interrupts = <5>;
>> + interrupt-parent = <&latte_pic>;
>> +
>> + big-endian-regs;
>> + };
>> +
>> + ohci_0_1: usb@d060000 {
>> + compatible = "nintendo,latte-usb-ohci";
>> + reg = <0x0d060000 0x100>;
>> + interrupts = <6>;
>> + interrupt-parent = <&latte_pic>;
>> +
>> + big-endian-regs;
>> + };
>> +
>> + ehci_1: usb@d120000 {
>> + compatible = "nintendo,latte-usb-ehci", "usb-ehci";
>> + reg = <0x0d120000 0x100>;
>> + interrupts = <16>;
>> + interrupt-parent = <&latte_pic>;
>> + big-endian-regs;
>> + };
>> +
>> + ohci_1_0: usb@d130000 {
>> + compatible = "nintendo,latte-usb-ohci";
>> + reg = <0x0d130000 0x100>;
>> + interrupts = <35>;
>> + interrupt-parent = <&latte_pic>;
>> +
>> + big-endian-regs;
>> + };
>> +
>> + ehci_2: usb@d140000 {
>> + compatible = "nintendo,latte-usb-ehci", "usb-ehci";
>> + reg = <0x0d140000 0x100>;
>> + interrupts = <36>;
>> + interrupt-parent = <&latte_pic>;
>> + big-endian-regs;
>> + };
>> +
>> + ohci_2_0: usb@d150000 {
>> + compatible = "nintendo,latte-usb-ohci";
>> + reg = <0x0d150000 0x100>;
>> + interrupts = <37>;
>> + interrupt-parent = <&latte_pic>;
>> +
>> + big-endian-regs;
>> + };
>> +
>> + sdcard_0: sdhci@d070000 {
>> + compatible = "nintendo,latte-sdhci","sdhci";
>> + reg = <0x0d070000 0x200>;
>> + interrupts = <7>;
>> + interrupt-parent = <&latte_pic>;
>> + };
>> +
>> + wifi_0: sdhci@d080000 {
>> + compatible = "nintendo,latte-sdhci","sdhci";
>> + reg = <0x0d080000 0x200>;
>> + interrupts = <8>;
>> + interrupt-parent = <&latte_pic>;
>> + };
>> +
>> + legacy_ipc: ipc@d800000 {
>> + compatible = "nintendo,latte-ipc","nintendo,hollywood-ipc";
>
> space between compatibles needed.
>
>> + reg = <0x0d800000 0x10>;
>> + interrupts = <30 31>;
>> + interrupt-parent = <&latte_pic>;
>> + };
>> +
>> + latte_otp: otp@d8001ec {
>> + compatible = "nintendo,latte-otp";
>> + reg = <0x0d8001ec 0x8>;
>> + };
>> +
>> + sata: ahci@d160400 {
>> + compatible = "nintendo,latte-ahci";
>> + reg = <0x0d160400 0x808>;
>> +
>> + interrupt-parent = <&latte_pic>;
>> + interrupts = <38 28>;
>> + };
>> +
>> + latte_pic: pic@d800440 {
>> + #interrupt-cells = <1>;
>> + interrupt-controller;
>> +
>> + compatible = "nintendo,latte-pic";
>> + reg = <0x0d800440 0x30>;
>> + interrupt-parent = <&espresso_pic>;
>> + interrupts = <24>;
>> + };
>> +
>> + gpio: gpio@d8000c0 {
>> + #gpio-cells = <2>;
>> + compatible = "nintendo,latte-gpio", "nintendo,hollywood-gpio";
>> +
>> + reg = <0x0d8000c0 0x40>;
>> + gpio-controller;
>> + /* TODO: There are actually 31 AHBALL GPIOs */
>> + ngpios = <24>;
>> +
>> + gpio-line-names =
>> + "POWER", "DWIFI", "FAN", "DC_DC",
>> + "", "Esp10WorkAround", "", "",
>> + "PADPD", "", "EEP_CS", "EEP_CLK",
>> + "EEP_MOSI", "EEP_MISO", "AVE_SCL", "AVE_SDA",
>> + "DEBUG0", "DEBUG1", "DEBUG2", "DEBUG3",
>> + "DEBUG4", "DEBUG5", "DEBUG6", "DEBUG7";
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + interrupts = <10>;
>> + interrupt-parent = <&latte_pic>;
>> + };
>> +
>> + spi_gpio: spi-gpio {
>
> Move this to root level. It's not on the 'latte' bus.
>
>> + compatible = "spi-gpio";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + status = "okay";
>
> Not needed, that's the default.
>
>> +
>> + cs-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
>> + gpio-sck = <&gpio 11 GPIO_ACTIVE_HIGH>;
>> + gpio-mosi = <&gpio 12 GPIO_ACTIVE_HIGH>;
>> + gpio-miso = <&gpio 13 GPIO_ACTIVE_HIGH>;
>> + num-chipselects = <1>;
>> +
>> + seeprom@0 {
>
> eeprom@0
>
>> + compatible = "atmel,at93c66";
>> + reg = <0>;
>> + spi-max-frequency = <1000000>;
>> + spi-cs-high;
>> + /* TODO: wiiubrew says this is 16-bit, but I only get the correct
>> + * values in 8-bit...
>> + */
>> + data-size = <8>;
>> + read-only;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> +
>> + /* https://wiiubrew.org/wiki/Hardware/SEEPROM */
>> + rng_seed: rng@12 { reg = <0x012 8>; };
>> + ppc_pvr: pvr@20 { reg = <0x020 4>; };
>> + seeprom_ver_str: sver-str@24 { reg = <0x024 6>; };
>> + seeprom_ver: sver@2a { reg = <0x02A 2>; };
>> + otp_ver: over@2c { reg = <0x02C 2>; };
>> + otp_rev: orev@2e { reg = <0x02E 2>; };
>> + otp_ver_str: over-str@30 { reg = <0x030 8>; };
>> +
>> + bc_crc: bc-crc@38 { reg = <0x038 4>; };
>> + bc_sz: bc-sz@3c { reg = <0x03C 2>; };
>> + bc_ver: bc-ver@3e { reg = <0x03E 2>; };
>> + bc_boardtype: boardtype@42 { reg = <0x042 2>; };
>> + bc_boardrev: boardrev@44 { reg = <0x044 2>; };
>> + bc_bootsource: bootsource@46 { reg = <0x046 2>; };
>> + bc_ddr3size: ddr3size@48 { reg = <0x048 2>; };
>> + bc_ddr3speed: ddr3speed@4a { reg = <0x04A 2>; };
>> + bc_ppcclockmul: ppcclockmul@4c { reg = <0x04C 2>; };
>> + bc_iopclockmul: iopclockmul@46 { reg = <0x04E 2>; };
>> + bc_video1080p: video1080p@50 { reg = <0x050 2>; };
>> + bc_ddr3vendor: ddr3vendor@52 { reg = <0x052 2>; };
>> + bc_movpassivereset: movpassivereset@54 { reg = <0x054 2>; };
>> + bc_syspllspd: syspllspd@56 { reg = <0x056 2>; };
>> + bc_satadevice: satadevice@58 { reg = <0x058 2>; };
>> + bc_consoletype: consoletype@5a { reg = <0x05A 2>; };
>> + bc_deviceprescence: deviceprescence@5c { reg = <0x05C 2>; };
>> +
>> + drive_key: drvkey@80 { reg = <0x080 16>; };
>> + factory_key: fackey@90 { reg = <0x090 16>; };
>> + shdd_key: shddkey@a0 { reg = <0x0A0 16>; };
>> + usb_key_seed: usbkeyseed@b0 { reg = <0x0B0 16>; };
>> + drive_key_flag: drvkeyf@c0 { reg = <0x0C0 2>; };
>> + usb_key_flag: udbkeyf@c2 { reg = <0x0C2 2>; };
>> + shdd_key_flag: shddkeyf@c4 { reg = <0x0C4 2>; };
>> +
>> + sysprod_version: sp_ver@140 { reg = <0x140 4>; };
>> + sysprod_eeprom_version: sp_ee_ver@144 { reg = <0x144 4>; };
>> + sysprod_product_area: sp_parea@148 { reg = <0x148 4>; };
>> + sysprod_game_region: sp_region@14c { reg = <0x14C 4>; };
>> + sysprod_ntsc_pal: sp_ntscpal@150 { reg = <0x150 4>; };
>> + sysprod_5ghz_country: sp_5ghz_c@154 { reg = <0x154 2>; };
>> + sysprod_5ghz_country_rev: sp_5ghz_crev@156 { reg = <0x156 2>; };
>> + sysprod_code: sp_code@158 { reg = <0x158 8>; };
>> + sysprod_serial: sp_serial@160 { reg = <0x160 16>; };
>> + sysprod_model: sp_model@170 { reg = <0x170 16>; };
>> +
>> + prod_year: pyear@188 { reg = <0x188 2>; };
>> + prod_date: pdate@18a { reg = <0x18A 2>; };
>> + prod_time: ptime@18c { reg = <0x18C 2>; };
>> +
>> + boot_params: boot_params@1c0 { reg = <0x1C0 48>; };
>> + };
>> + };
>> +
>> + /* TODO make this gpio-keyed once hollywood-gpio supports interrupts */
>> + gpio-keys-polled {
>
> This too.
>
>> + poll-interval = <50>;
>> + compatible = "gpio-keys-polled";
>> +
>> + power {
>> + label = "Power Button";
>> + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
>> + linux,code = <KEY_POWER>;
>> + };
>> + };
>> +
>> + gpio2: gpio2@d8000c0 {
>
> gpio@d800520
>
>> + #gpio-cells = <2>;
>> + compatible = "nintendo,latte-gpio", "nintendo,hollywood-gpio";
>> +
>> + reg = <0x0d800520 0x40>;
>> + gpio-controller;
>> + ngpios = <7>;
>> +
>> + gpio-line-names =
>> + "FANSPEED", "SMC_SCL", "SMC_SDA", "DC_DC2",
>> + "AVE_INT", "", "AVE_RESET";
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + interrupts = <10>;
>> + interrupt-parent = <&latte_pic>;
>> + };
>> + };
>> +};
>> --
>> 2.35.1
>>

Will do in v2.

Thanks,
Ash

\
 
 \ /
  Last update: 2022-03-03 03:42    [W:0.101 / U:1.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site