lkml.org 
[lkml]   [2022]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 4/8] MIPS: mscc: ocelot: fix load/save GPIO pinctrl name
From
On 18/03/2022 21:25, Michael Walle wrote:
> The pinctrl device tree binding will be converted to YAML format. All
> the pin nodes should end with "-pins". Fix them.
>
> Fixes: 15324652f612 ("MIPS: dts: ocelot: describe the load/save GPIO")

There is no bug here, so no need for fix.

> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
> arch/mips/boot/dts/mscc/ocelot_pcb120.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
> index cda6c5ff58ad..d348742c233d 100644
> --- a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
> +++ b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
> @@ -27,7 +27,7 @@ phy_int_pins: phy-int-pins {
> function = "gpio";
> };
>
> - phy_load_save_pins: phy_load_save_pins {
> + phy_load_save_pins: phy-load-save-pins {
> pins = "GPIO_10";

This should be squashed with previous patch or with the next one. There
is no point to align names with dtschema/dt spec one by one. Make the
conversion per entire board file or SoC.


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-03-19 15:34    [W:0.083 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site