lkml.org 
[lkml]   [2022]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] thunderbolt: Make iommu_dma_protection more accurate
From
On 2022-03-18 13:25, mika.westerberg@linux.intel.com wrote:
> Hi Robin,
>
> On Fri, Mar 18, 2022 at 12:01:42PM +0000, Robin Murphy wrote:
>>> This adds quite a lot code and complexity, and honestly I would like to
>>> keep it as simple as possible (and this is not enough because we need to
>>> make sure the DMAR bit is there so that none of the possible connected
>>> devices were able to overwrite our memory already).
>>
>> Shall we forget the standalone sibling check and just make the
>> pdev->untrusted check directly in tb_acpi_add_link() then?
>
> I think we should leave tb_acpi_add_link() untouched if possible ;-)
> This is because it is used to add the device links from firmware
> description that we need for proper power management of the tunneled
> devices. It has little to do with the identification of the external
> facing DMA-capable PCIe ports.
>
> Furthermore these links only exists in USB4 software connection manager
> systems so we do not have those in the existing Thunderbolt 3/4 systems
> that use firmware based connection manager (pretty much all out there).
>
>> On reflection I guess the DMAR bit makes iommu_dma_protection
>> functionally dependent on ACPI already, so we don't actually lose
>> anything (and anyone can come back and revisit firmware-agnostic
>> methods later if a need appears).
>
> I agree.

OK, so do we have any realistic options for identifying the correct PCI
devices, if USB4 PCIe adapters might be anywhere relative to their
associated NHI? Short of maintaining a list of known IDs, the only
thought I have left is that if we walk the whole PCI segment looking
specifically for hotplug-capable Gen1 ports, any system modern enough to
have Thunderbolt is *probably* not going to have any real PCIe Gen1
hotplug slots, so maybe false negatives might be tolerable, but it still
feels like a bit of a sketchy heuristic.

I suppose we could just look to see if any device anywhere is marked as
external-facing, and hope that if firmware's done that much then it's
done everything right. That's still at least slightly better than what
we have today, but AFAICS still carries significant risk of a false
positive for an add-in card that firmware didn't recognise.

I'm satisfied that we've come round to the right conclusion on the DMAR
opt-in - I'm in the middle or writing up patches for that now - but even
Microsoft's spec gives that as a separate requirement from the flagging
of external ports, with both being necessary for Kernel DMA Protection.

Robin.

\
 
 \ /
  Last update: 2022-03-18 15:09    [W:0.904 / U:0.632 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site