lkml.org 
[lkml]   [2022]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH net-next 3/3] net: dsa: mv88e6xxx: mac-auth/MAB implementation
Date
On tor, mar 17, 2022 at 19:20, Vladimir Oltean <olteanv@gmail.com> wrote:
> On Thu, Mar 17, 2022 at 05:58:26PM +0100, Hans Schultz wrote:
>> On tor, mar 17, 2022 at 18:18, Vladimir Oltean <olteanv@gmail.com> wrote:
>> > On Thu, Mar 17, 2022 at 05:07:15PM +0100, Hans Schultz wrote:
>> >> On tor, mar 17, 2022 at 17:36, Vladimir Oltean <olteanv@gmail.com> wrote:
>> >> > On Thu, Mar 17, 2022 at 03:19:46PM +0100, Andrew Lunn wrote:
>> >> >> On Thu, Mar 17, 2022 at 09:52:15AM +0100, Hans Schultz wrote:
>> >> >> > On tor, mar 17, 2022 at 01:34, Vladimir Oltean <olteanv@gmail.com> wrote:
>> >> >> > > On Mon, Mar 14, 2022 at 11:46:51AM +0100, Hans Schultz wrote:
>> >> >> > >> >> @@ -396,6 +414,13 @@ static irqreturn_t mv88e6xxx_g1_atu_prob_irq_thread_fn(int irq, void *dev_id)
>> >> >> > >> >> "ATU miss violation for %pM portvec %x spid %d\n",
>> >> >> > >> >> entry.mac, entry.portvec, spid);
>> >> >> > >> >> chip->ports[spid].atu_miss_violation++;
>> >> >> > >> >> + if (mv88e6xxx_port_is_locked(chip, chip->ports[spid].port))
>> >> >> > >> >> + err = mv88e6xxx_switchdev_handle_atu_miss_violation(chip,
>> >> >> > >> >> + chip->ports[spid].port,
>> >> >> > >> >> + &entry,
>> >> >> > >> >> + fid);
>> >> >> > >> >
>> >> >> > >> > Do we want to suppress the ATU miss violation warnings if we're going to
>> >> >> > >> > notify the bridge, or is it better to keep them for some reason?
>> >> >> > >> > My logic is that they're part of normal operation, so suppressing makes
>> >> >> > >> > sense.
>> >> >> > >> >
>> >> >> > >>
>> >> >> > >> I have been seeing many ATU member violations after the miss violation is
>> >> >> > >> handled (using ping), and I think it could be considered to suppress the ATU member
>> >> >> > >> violations interrupts by setting the IgnoreWrongData bit for the
>> >> >> > >> port (sect 4.4.7). This would be something to do whenever a port is set in locked mode?
>> >> >> > >
>> >> >> > > So the first packet with a given MAC SA triggers an ATU miss violation
>> >> >> > > interrupt.
>> >> >> > >
>> >> >> > > You program that MAC SA into the ATU with a destination port mask of all
>> >> >> > > zeroes. This suppresses further ATU miss interrupts for this MAC SA, but
>> >> >> > > now generates ATU member violations, because the MAC SA _is_ present in
>> >> >> > > the ATU, but not towards the expected port (in fact, towards _no_ port).
>> >> >> > >
>> >> >> > > Especially if user space decides it doesn't want to authorize this MAC
>> >> >> > > SA, it really becomes a problem because this is now a vector for denial
>> >> >> > > of service, with every packet triggering an ATU member violation
>> >> >> > > interrupt.
>> >> >> > >
>> >> >> > > So your suggestion is to set the IgnoreWrongData bit on locked ports,
>> >> >> > > and this will suppress the actual member violation interrupts for
>> >> >> > > traffic coming from these ports.
>> >> >> > >
>> >> >> > > So if the user decides to unplug a previously authorized printer from
>> >> >> > > switch port 1 and move it to port 2, how is this handled? If there isn't
>> >> >> > > a mechanism in place to delete the locked FDB entry when the printer
>> >> >> > > goes away, then by setting IgnoreWrongData you're effectively also
>> >> >> > > suppressing migration notifications.
>> >> >> >
>> >> >> > I don't think such a scenario is so realistic, as changing port is not
>> >> >> > just something done casually, besides port 2 then must also be a locked
>> >> >> > port to have the same policy.
>> >> >>
>> >> >> I think it is very realistic. It is also something which does not work
>> >> >> is going to cause a lot of confusion. People will blame the printer,
>> >> >> when in fact they should be blaming the switch. They will be rebooting
>> >> >> the printer, when in fact, they need to reboot the switch etc.
>> >> >>
>> >> >> I expect there is a way to cleanly support this, you just need to
>> >> >> figure it out.
>> >> >
>> >> > Hans, why must port 2 also be a locked port? The FDB entry with no
>> >> > destinations is present in the ATU, and static, why would just locked
>> >> > ports match it?
>> >> >
>> >> You are right of course, but it was more from a policy standpoint as I
>> >> pointed out. If the FDB entry is removed after some timeout and the
>> >> device in the meantime somehow is on another port that is not locked
>> >> with full access, the device will of course get full access.
>> >> But since it was not given access in the first instance, the policy is
>> >> not consistent.
>> >>
>> >> >> > The other aspect is that the user space daemon that authorizes catches
>> >> >> > the fdb add entry events and checks if it is a locked entry. So it will
>> >> >> > be up to said daemon to decide the policy, like remove the fdb entry
>> >> >> > after a timeout.
>> >> >
>> >> > When you say 'timeout', what is the moment when the timer starts counting?
>> >> > The last reception of the user space daemon of a packet with this MAC SA,
>> >> > or the moment when the FDB entry originally became unlocked?
>> >>
>> >> I think that if the device is not given access, a timer should be
>> >> started at that moment. No further FDB add events with the same MAC
>> >> address will come of course until the FDB entry is removed, which I
>> >> think would be done based on the said timer.
>> >> >
>> >> > I expect that once a device is authorized, and forwarding towards the
>> >> > devices that it wants to talk to is handled in hardware, that the CPU no
>> >> > longer receives packets from this device. In other words, are you saying
>> >> > that you're going to break networking for the printer every 5 minutes,
>> >> > as a keepalive measure?
>> >>
>> >> No, I don't think that would be a good idea, but as we are in userspace,
>> >> that is a policy decision of those creating the daemon. The kernel just
>> >> facilitates, it does not make those decisions as far as I think.
>> >> >
>> >> > I still think there should be a functional fast path for authorized
>> >> > station migrations.
>> >> >
>> >> I am not sure in what way you are suggesting that should be, if the
>> >> kernel should actively do something there? If a station is authorized,
>> >> and somehow is transferred to another port, if that port is not locked it
>> >> will get access, if the port is locked a miss violation will occur etc...
>> >
>> > Wait, if the new port is locked and the device was previously
>> > authorized, why will the new port trigger a miss violation? This is the
>> > part I'm not following. The authorization is still present in the form
>> > of an ATU entry on the old locked port, is it not?
>> >
>> I am sure (have not tested) that a miss violation will occur. It might
>> be a member violation in this instance though.
>> When thinking of it, afaik there is no way today of having fine control
>> over the DPV when adding a FDB entry.
>> If the DPV could be finer controlled the entry could cover several
>> possible ports and the fast (immediate migration) will be accomplished?
>
> I'm not sure I understand this, either.
>
> You're saying we should configure the authorizations as de-facto
> multicast ATU entries towards all locked ports, so that there wouldn't
> be any violation when a station migrates, because the new port is still
> in the destination port mask of the ATU entry?
>
> Yes, but... this leaks traffic between ports to a significant degree.
> Any packet that targets your printer now targets your colleague's printer too.
>
> I was expecting you'd say that when the cable is unplugged from the
> switch, the authorization daemon is notified through rtnetlink of the
> link state change, and it flushes the port of addresses it has added
> (because the kernel surely does not do this).
>
So, my HW tests show that when the link is removed, the FDB entries
related to the port are flushed automatically.

> This could work to an extent, but it wouldn't handle the case where the
> printer isn't connected directly to the 802.1X port, but through
> another dumb switch. I don't know enough about 802.1X, but I don't see
> why this isn't a valid configuration.
>
ATM, the dynamic flag (bridge fdb add MAC dev DEV master dynamic)
doesn't create an ageing FDB entry in the offloaded case. Maybe if that
was solved, it would be a good enough solution, as for a noisy device,
it would lose some packets every 5 minutes, which higher layers should
be able to handle?

> To explain what I'm thinking of. At office, IT gave one Ethernet port to
> each desk, but I have multiple devices. I have a PC, a printer, and a
> development board, each with a single Ethernet port, so I use a dumb
> 4-port switch to connect all these devices to the 802.1X port beneath my
> desk. I talked to IT, brought my printer to them, they agreed to bypass
> 802.1X authorization for it based on the MAC address on its label.
>
> I've been working from home for the past few years, but now I need to
> return to office. But since years have passed, some colleagues left,
> some new colleagues came, and I need to change my desk. The new one
> belonged to a co-worker who also had a dumb switch on his desk, so I see
> no reason to move mine too. I unplug the printer from my dumb switch,
> plug it into the new one, but it doesn't work. What do I do, open a
> ticket to IT asking for halp?
>
> To be honest this is purely fictional and I haven't tried it, but it
> sounds like I should when I get the chance, to get a better image of how
> things are supposed to work.
>
>> >> >> > > Oh, btw, my question was: could you consider suppressing the _prints_ on
>> >> >> > > an ATU miss violation on a locked port?
>> >> >> >
>> >> >> > As there will only be such on the first packet, I think it should be
>> >> >> > logged and those prints serve that purpose, so I think it is best to
>> >> >> > keep the print.
>> >> >> > If in the future some tests or other can argue for suppressing the
>> >> >> > prints, it is an easy thing to do.
>> >> >>
>> >> >> Please use a traffic generator and try to DOS one of your own
>> >> >> switches. Can you?
>> >> >>
>> >> >> Andrew

\
 
 \ /
  Last update: 2022-03-18 11:05    [W:0.145 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site