Messages in this thread Patch in this message | | | From | Luca Weiss <> | Subject | [PATCH 6/6] arm64: dts: qcom: sm7225-fairphone-fp4: Enable UFS | Date | Fri, 18 Mar 2022 19:30:04 +0100 |
| |
Configure and enable the nodes for UFS that are used for internal storage on FP4.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> --- .../boot/dts/qcom/sm7225-fairphone-fp4.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index adb6ca2be2a5..533a1c88040f 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -336,6 +336,24 @@ &uart2 { status = "okay"; }; +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7e>; + vcc-max-microamp = <800000>; + vccq2-supply = <&vreg_l12a>; + vccq2-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l18a>; + vdda-pll-supply = <&vreg_l22a>; +}; + &usb_1 { status = "okay"; }; -- 2.35.1
| |