lkml.org 
[lkml]   [2022]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2 16/32] x86/sgx: Support restricting of enclave page permissions
On Thu, Mar 17, 2022 at 09:28:45AM -0500, Haitao Huang wrote:
> Hi
>
> On Thu, 17 Mar 2022 02:11:28 -0500, Jarkko Sakkinen <jarkko@kernel.org>
> wrote:
>
> > On Thu, Mar 17, 2022 at 09:01:07AM +0200, Jarkko Sakkinen wrote:
> > > On Mon, Mar 14, 2022 at 10:39:36AM -0500, Haitao Huang wrote:
> > > > Hi Jarkko
> > > >
> > > > On Sun, 13 Mar 2022 21:58:51 -0500, Jarkko Sakkinen
> > > <jarkko@kernel.org>
> > > > wrote:
> > > >
> > > > > On Mon, Mar 14, 2022 at 04:50:56AM +0200, Jarkko Sakkinen wrote:
> > > > > > On Mon, Mar 14, 2022 at 04:49:37AM +0200, Jarkko Sakkinen wrote:
> > > > > > > On Fri, Mar 11, 2022 at 09:53:29AM -0800, Reinette Chatre wrote:
> > > > > > >
> > > > > > > > I saw Haitao's note that EMODPE requires "Read access
> > > permitted
> > > > > > by enclave".
> > > > > > > > This motivates that EMODPR->PROT_NONE should not be allowed
> > > > > > since it would
> > > > > > > > not be possible to relax permissions (run EMODPE) after that.
> > > > > > Even so, I
> > > > > > > > also found in the SDM that EACCEPT has the note "Read access
> > > > > > permitted
> > > > > > > > by enclave". That seems to indicate that EMODPR->PROT_NONE is
> > > > > > not practical
> > > > > > > > from that perspective either since the enclave will not be
> > > able to
> > > > > > > > EACCEPT the change. Does that match your understanding?
> > > > > > >
> > > > > > > Yes, PROT_NONE should not be allowed.
> > > > > > >
> > > > > > > This is however the real problem.
> > > > > > >
> > > > > > > The current kernel patch set has inconsistent API and EMODPR
> > > ioctl is
> > > > > > > simply unacceptable. It also requires more concurrency
> > > management
> > > > > > from
> > > > > > > user space run-time, which would be heck a lot easier to do
> > > in the
> > > > > > kernel.
> > > > > > >
> > > > > > > If you really want EMODPR as ioctl, then for consistencys sake,
> > > > > > then EAUG
> > > > > > > should be too. Like this when things go opposite directions,
> > > this
> > > > > > patch set
> > > > > > > plain and simply will not work out.
> > > > > > >
> > > > > > > I would pick EAUG's strategy from these two as it requires half
> > > > > > the back
> > > > > > > calls to host from an enclave. I.e. please combine
> > > mprotect() and
> > > > > > EMODPR,
> > > > > > > either in the #PF handler or as part of mprotect(), which ever
> > > > > > suits you
> > > > > > > best.
> > > > > > >
> > > > > > > I'll try demonstrate this with two examples.
> > > > > > >
> > > > > > > mmap() could go something like this() (simplified):
> > > > > > > 1. Execution #UD's to SYSCALL.
> > > > > > > 2. Host calls enclave's mmap() handler with mmap() parameters.
> > > > > > > 3. Enclave up-calls host's mmap().
> > > > > > > 4. Loops the range with EACCEPTCOPY.
> > > > > > >
> > > > > > > mprotect() has to be done like this:
> > > > > > > 1. Execution #UD's to SYSCALL.
> > > > > > > 2. Host calls enclave's mprotect() handler.
> > > > > > > 3. Enclave up-calls host's mprotect().
> > > > > > > 4. Enclave up-calls host's ioctl() to
> > > SGX_IOC_ENCLAVE_PERMISSIONS.
> > > >
> > > > I assume up-calls here are ocalls as we call them in our
> > > implementation,
> > > > which are the calls enclave make to untrusted side via EEXIT.
> > > >ar
> > > > If so, can your implementation combine this two up-calls into one,
> > > then host
> > > > side just do ioctl() and mprotect to kernel? If so, would that
> > > address your
> > > > concern about extra up-calls?
> > > >
> > > >
> > > > > > > 3. Loops the range with EACCEPT.
> > > > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > > > > 5. Loops the range with EACCEPT + EMODPE.
> > > > > >
> > > > > > > This is just terrible IMHO. I hope these examples bring some
> > > insight.
> > > > >
> > > > > E.g. in Enarx we have to add a special up-call (so called
> > > enarxcall in
> > > > > intermediate that we call sallyport, which provides shared buffer to
> > > > > communicate with the enclave) just for reseting the range with
> > > PROT_READ.
> > > > > Feel very redundant, adds ugly cruft and is completely opposite
> > > strategy
> > > > > to
> > > > > what you've chosen to do with EAUG, which is I think correct
> > > choice as
> > > > > far
> > > > > as API is concerned.
> > > >
> > > > The problem with EMODPR on #PF is that kernel needs to know what
> > > permissions
> > > > requested from enclave at the time of #PF. So enclave has to make
> > > at least
> > > > one call to kernel (again via ocall in our case, I assume up-call
> > > in your
> > > > case) to make the change.
> > >
> > > The #PF handler should do unconditionally EMODPR with PROT_READ.
> >
> > Or mprotect(), as long as secinfo contains PROT_READ. I don't care about
> > this detail hugely anymore because it does not affect uapi.
> >
> > Using EMODPR as a permission control mechanism is a ridiculous idea, and
> > I cannot commit to maintain a broken uapi.
> >
>
> Jarkko, how would automatically forcing PROT_READ on #PF work for this
> sequence?
>
> 1) EAUG a page (has to be RW)
> 2) EACCEPT(RW)
> 3) enclave copies some data to page
> 4) enclave wants to change permission to R
>
> If you are proposing mprotect, then as I indicated earlier, please address
> concerns raised by Reinette:
> https://lore.kernel.org/linux-sgx/e1c04077-0165-c5ec-53be-7fd732965e80@intel.com/

For EAUG you can choose between #PF handler and having it as part of
mmap() with the same uapi.

For EMODPR clearly #PF handler would be tricky but nothing prevents
resetting the permissions as part of mprotect() flow, which is trivial.

One good reason to have a fixed EMODPR is that e.g. emulating properly
mprotect() is almost undoable if you don't do it otherwise. Specifically
the scenario where your address range spans through multiple adjacent
VMAs. It's even without EMODPR complex enough scenario that you really
don't want to ask yourself for more trouble than use EMODPR in a super
conservative manner.

Having EMODPR fully exposed will only make more difficult API to do with
extra round-trips. If you want to use ring-0 instructions fully exposed,
please don't use a kernel. There's a bunch of hardware features in Intel
CPUs for which Linux does not provide 1:1 all wide open interfaces.

BR, Jarkko

\
 
 \ /
  Last update: 2022-03-17 22:52    [W:0.124 / U:1.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site