lkml.org 
[lkml]   [2022]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 2/2] arm64: dts: imx8mn-bsh-smm-s2pro: Add tlv320aic31xx audio card node
From
Hi Fabio,

On 3/10/22 09:29, Fabio Estevam wrote:
> Hi Ariel,
>
> On Thu, Feb 10, 2022 at 10:41 AM Ariel D'Alessandro
> <ariel.dalessandro@collabora.com> wrote:
>
>> +&i2c2 {
>> + clock-frequency = <400000>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_i2c2>;
>> + status = "okay";
>> +
>> + codec: tlv320dac3101@18 {
>> + #sound-dai-cells = <0>;
>> + compatible = "ti,tlv320dac3101";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_dac_rst>;
>> + reg = <0x18>;
>> +
>> + ai31xx-micbias-vg = <MICBIAS_AVDDV>;
>> +
>> + HPVDD-supply = <&buck4_reg>;
>> + SPRVDD-supply = <&vdd_input>;
>> + SPLVDD-supply = <&vdd_input>;
>> + AVDD-supply = <&buck4_reg>;
>> + IOVDD-supply = <&buck4_reg>;
>> + DVDD-supply = <&buck5_reg>;
>> + reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
>> +
>> + clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
>> + clock-names = "mclk";
>
> The clocks and clock-names properties are not documented in the codec bindings.
>
> Also, the driver does not use call clk_get() on this mclk clock.
>
> You should drop the clocks and clock-names properties.

The sound card driver is calling clk_get() on the codec's clock. See
sound/soc/fsl/fsl-asoc-card.c:

/* Get the MCLK rate only, and leave it controlled by CODEC drivers */
if (codec_dev) {
struct clk *codec_clk = clk_get(codec_dev, NULL);

if (!IS_ERR(codec_clk)) {
priv->codec_priv.mclk_freq = clk_get_rate(codec_clk);
clk_put(codec_clk);
}
}

Regards,
Ariel

\
 
 \ /
  Last update: 2022-03-17 19:56    [W:0.061 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site