Messages in this thread Patch in this message | | | Date | Thu, 17 Mar 2022 00:25:24 +0000 | From | Paul Cercueil <> | Subject | Re: [PATCH v4] pinctrl: ingenic: Fix regmap on X series SoCs |
| |
Hi,
Le jeu., mars 17 2022 at 00:07:40 +0000, Aidan MacDonald <aidanmacdonald.0x0@gmail.com> a écrit : > The X series Ingenic SoCs have a shadow GPIO group which is at a > higher > offset than the other groups, and is used for all GPIO configuration. > The regmap did not take this offset into account and set max_register > too low, so the regmap API blocked writes to the shadow group, which > made the pinctrl driver unable to configure any pins. > > Fix this by adding regmap access tables to the chip info. The way that > max_register was computed was also off by one, since max_register is > an > inclusive bound, not an exclusive bound; this has been fixed. > > Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Fixes: 6626a76ef857 ("pinctrl: ingenic: Add .max_register in regmap_config") Cc: stable@vger.kernel.org Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Cheers, -Paul
> --- > v1 -> v2: use regmap_access_table > v2 -> v3: compute max_register instead of putting it in chip_info > v3 -> v4: explain the fix to the max_register calculation > > drivers/pinctrl/pinctrl-ingenic.c | 46 > ++++++++++++++++++++++++++++++- > 1 file changed, 45 insertions(+), 1 deletion(-) > > diff --git a/drivers/pinctrl/pinctrl-ingenic.c > b/drivers/pinctrl/pinctrl-ingenic.c > index 2712f51eb238..fa6becca1788 100644 > --- a/drivers/pinctrl/pinctrl-ingenic.c > +++ b/drivers/pinctrl/pinctrl-ingenic.c > @@ -119,6 +119,8 @@ struct ingenic_chip_info { > unsigned int num_functions; > > const u32 *pull_ups, *pull_downs; > + > + const struct regmap_access_table *access_table; > }; > > struct ingenic_pinctrl { > @@ -2179,6 +2181,17 @@ static const struct function_desc > x1000_functions[] = { > { "mac", x1000_mac_groups, ARRAY_SIZE(x1000_mac_groups), }, > }; > > +static const struct regmap_range x1000_access_ranges[] = { > + regmap_reg_range(0x000, 0x400 - 4), > + regmap_reg_range(0x700, 0x800 - 4), > +}; > + > +/* shared with X1500 */ > +static const struct regmap_access_table x1000_access_table = { > + .yes_ranges = x1000_access_ranges, > + .n_yes_ranges = ARRAY_SIZE(x1000_access_ranges), > +}; > + > static const struct ingenic_chip_info x1000_chip_info = { > .num_chips = 4, > .reg_offset = 0x100, > @@ -2189,6 +2202,7 @@ static const struct ingenic_chip_info > x1000_chip_info = { > .num_functions = ARRAY_SIZE(x1000_functions), > .pull_ups = x1000_pull_ups, > .pull_downs = x1000_pull_downs, > + .access_table = &x1000_access_table, > }; > > static int x1500_uart0_data_pins[] = { 0x4a, 0x4b, }; > @@ -2300,6 +2314,7 @@ static const struct ingenic_chip_info > x1500_chip_info = { > .num_functions = ARRAY_SIZE(x1500_functions), > .pull_ups = x1000_pull_ups, > .pull_downs = x1000_pull_downs, > + .access_table = &x1000_access_table, > }; > > static const u32 x1830_pull_ups[4] = { > @@ -2506,6 +2521,16 @@ static const struct function_desc > x1830_functions[] = { > { "mac", x1830_mac_groups, ARRAY_SIZE(x1830_mac_groups), }, > }; > > +static const struct regmap_range x1830_access_ranges[] = { > + regmap_reg_range(0x0000, 0x4000 - 4), > + regmap_reg_range(0x7000, 0x8000 - 4), > +}; > + > +static const struct regmap_access_table x1830_access_table = { > + .yes_ranges = x1830_access_ranges, > + .n_yes_ranges = ARRAY_SIZE(x1830_access_ranges), > +}; > + > static const struct ingenic_chip_info x1830_chip_info = { > .num_chips = 4, > .reg_offset = 0x1000, > @@ -2516,6 +2541,7 @@ static const struct ingenic_chip_info > x1830_chip_info = { > .num_functions = ARRAY_SIZE(x1830_functions), > .pull_ups = x1830_pull_ups, > .pull_downs = x1830_pull_downs, > + .access_table = &x1830_access_table, > }; > > static const u32 x2000_pull_ups[5] = { > @@ -2969,6 +2995,17 @@ static const struct function_desc > x2000_functions[] = { > { "otg", x2000_otg_groups, ARRAY_SIZE(x2000_otg_groups), }, > }; > > +static const struct regmap_range x2000_access_ranges[] = { > + regmap_reg_range(0x000, 0x500 - 4), > + regmap_reg_range(0x700, 0x800 - 4), > +}; > + > +/* shared with X2100 */ > +static const struct regmap_access_table x2000_access_table = { > + .yes_ranges = x2000_access_ranges, > + .n_yes_ranges = ARRAY_SIZE(x2000_access_ranges), > +}; > + > static const struct ingenic_chip_info x2000_chip_info = { > .num_chips = 5, > .reg_offset = 0x100, > @@ -2979,6 +3016,7 @@ static const struct ingenic_chip_info > x2000_chip_info = { > .num_functions = ARRAY_SIZE(x2000_functions), > .pull_ups = x2000_pull_ups, > .pull_downs = x2000_pull_downs, > + .access_table = &x2000_access_table, > }; > > static const u32 x2100_pull_ups[5] = { > @@ -3189,6 +3227,7 @@ static const struct ingenic_chip_info > x2100_chip_info = { > .num_functions = ARRAY_SIZE(x2100_functions), > .pull_ups = x2100_pull_ups, > .pull_downs = x2100_pull_downs, > + .access_table = &x2000_access_table, > }; > > static u32 ingenic_gpio_read_reg(struct ingenic_gpio_chip *jzgc, u8 > reg) > @@ -4168,7 +4207,12 @@ static int __init ingenic_pinctrl_probe(struct > platform_device *pdev) > return PTR_ERR(base); > > regmap_config = ingenic_pinctrl_regmap_config; > - regmap_config.max_register = chip_info->num_chips * > chip_info->reg_offset; > + if (chip_info->access_table) { > + regmap_config.rd_table = chip_info->access_table; > + regmap_config.wr_table = chip_info->access_table; > + } else { > + regmap_config.max_register = chip_info->num_chips * > chip_info->reg_offset - 4; > + } > > jzpc->map = devm_regmap_init_mmio(dev, base, ®map_config); > if (IS_ERR(jzpc->map)) { > -- > 2.34.1 >
| |