lkml.org 
[lkml]   [2022]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v10 4/7] pinctrl: qcom: Update lpi pin group structure
From

On 3/8/2022 11:25 PM, Bjorn Andersson wrote:
Thanks for Your Time Bjorn!!!
> On Tue 08 Mar 03:03 PST 2022, Srinivasa Rao Mandadapu wrote:
>
>> Update lpi group structure with core group_desc structure
>> to avoid redundant struct params.
>>
> This fails to express why you're doing that, please see below.
>
>> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
>> Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
>> Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
>> ---
>> drivers/pinctrl/qcom/Kconfig | 1 +
>> drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 44 +++++++++++++++-----------------
>> 2 files changed, 22 insertions(+), 23 deletions(-)
>>
>> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
>> index ca6f68a..31c4aa6 100644
>> --- a/drivers/pinctrl/qcom/Kconfig
>> +++ b/drivers/pinctrl/qcom/Kconfig
>> @@ -351,6 +351,7 @@ config PINCTRL_LPASS_LPI
>> select PINMUX
>> select PINCONF
>> select GENERIC_PINCONF
>> + select GENERIC_PINCTRL_GROUPS
> This allow you to use struct group_desc, but what does that give you?
>
> I don't see a change where you're moving to use the common group_desc
> helpers that the framework supplies. Without that this just replace 3
> entries in struct lpi_pingroup with 4 entries in struct group_desc.
>
>
> Change looks good, iff it's followed by a transition to replace the
> driver's custom functions with pinctrl_generic_get_group_*().
>
> Regards,
> Bjorn
Okay. Will change and re send the patch set.
>
>> depends on GPIOLIB
>> help
>> This is the pinctrl, pinmux, pinconf and gpiolib driver for the
>> diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
>> index 3c15f80..54750ba 100644
>> --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
>> +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
>> @@ -51,11 +51,11 @@
>>
>> #define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \
>> { \
>> - .name = "gpio" #id, \
>> - .pins = gpio##id##_pins, \
>> + .group.name = "gpio" #id, \
>> + .group.pins = gpio##id##_pins, \
>> .pin = id, \
>> .slew_offset = soff, \
>> - .npins = ARRAY_SIZE(gpio##id##_pins), \
>> + .group.num_pins = ARRAY_SIZE(gpio##id##_pins), \
>> .funcs = (int[]){ \
>> LPI_MUX_gpio, \
>> LPI_MUX_##f1, \
>> @@ -67,9 +67,7 @@
>> }
>>
>> struct lpi_pingroup {
>> - const char *name;
>> - const unsigned int *pins;
>> - unsigned int npins;
>> + struct group_desc group;
>> unsigned int pin;
>> /* Bit offset in slew register for SoundWire pins only */
>> int slew_offset;
>> @@ -150,20 +148,20 @@ enum sm8250_lpi_functions {
>> LPI_MUX__,
>> };
>>
>> -static const unsigned int gpio0_pins[] = { 0 };
>> -static const unsigned int gpio1_pins[] = { 1 };
>> -static const unsigned int gpio2_pins[] = { 2 };
>> -static const unsigned int gpio3_pins[] = { 3 };
>> -static const unsigned int gpio4_pins[] = { 4 };
>> -static const unsigned int gpio5_pins[] = { 5 };
>> -static const unsigned int gpio6_pins[] = { 6 };
>> -static const unsigned int gpio7_pins[] = { 7 };
>> -static const unsigned int gpio8_pins[] = { 8 };
>> -static const unsigned int gpio9_pins[] = { 9 };
>> -static const unsigned int gpio10_pins[] = { 10 };
>> -static const unsigned int gpio11_pins[] = { 11 };
>> -static const unsigned int gpio12_pins[] = { 12 };
>> -static const unsigned int gpio13_pins[] = { 13 };
>> +static int gpio0_pins[] = { 0 };
>> +static int gpio1_pins[] = { 1 };
>> +static int gpio2_pins[] = { 2 };
>> +static int gpio3_pins[] = { 3 };
>> +static int gpio4_pins[] = { 4 };
>> +static int gpio5_pins[] = { 5 };
>> +static int gpio6_pins[] = { 6 };
>> +static int gpio7_pins[] = { 7 };
>> +static int gpio8_pins[] = { 8 };
>> +static int gpio9_pins[] = { 9 };
>> +static int gpio10_pins[] = { 10 };
>> +static int gpio11_pins[] = { 11 };
>> +static int gpio12_pins[] = { 12 };
>> +static int gpio13_pins[] = { 13 };
>> static const char * const swr_tx_clk_groups[] = { "gpio0" };
>> static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" };
>> static const char * const swr_rx_clk_groups[] = { "gpio3" };
>> @@ -262,7 +260,7 @@ static const char *lpi_gpio_get_group_name(struct pinctrl_dev *pctldev,
>> {
>> struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
>>
>> - return pctrl->data->groups[group].name;
>> + return pctrl->data->groups[group].group.name;
>> }
>>
>> static int lpi_gpio_get_group_pins(struct pinctrl_dev *pctldev,
>> @@ -272,8 +270,8 @@ static int lpi_gpio_get_group_pins(struct pinctrl_dev *pctldev,
>> {
>> struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
>>
>> - *pins = pctrl->data->groups[group].pins;
>> - *num_pins = pctrl->data->groups[group].npins;
>> + *pins = pctrl->data->groups[group].group.pins;
>> + *num_pins = pctrl->data->groups[group].group.num_pins;
>>
>> return 0;
>> }
>> --
>> 2.7.4
>>

\
 
 \ /
  Last update: 2022-03-15 16:18    [W:0.077 / U:0.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site