lkml.org 
[lkml]   [2022]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 12/16] clk: qcom: clk-krait: add 8064 errata workaround
On Mon, Mar 14, 2022 at 11:20:21AM +0300, Dmitry Baryshkov wrote:
> On 13/03/2022 22:04, Ansuel Smith wrote:
> > Add 8064 errata workaround where the sec_src clock gating needs to be
>
> Could you please be more specific whether the errata applies only to the
> ipq8064 or to the apq8064 too? 8064 is not specific enough.
>

That's a good question... Problem is that we really don't know the
answer. This errata comes from qsdk on an old sourcecode. I assume this
is specific to ipq8064 and apq8064 have different mux configuration.

> > disabled during switching. To enable this set disable_sec_src_gating in
> > the mux struct.
> >
> > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > ---
> > drivers/clk/qcom/clk-krait.c | 16 ++++++++++++++++
> > drivers/clk/qcom/clk-krait.h | 1 +
> > drivers/clk/qcom/krait-cc.c | 1 +
> > 3 files changed, 18 insertions(+)
> >
> > diff --git a/drivers/clk/qcom/clk-krait.c b/drivers/clk/qcom/clk-krait.c
> > index d8af281eba0e..82fe7031e1f4 100644
> > --- a/drivers/clk/qcom/clk-krait.c
> > +++ b/drivers/clk/qcom/clk-krait.c
> > @@ -18,13 +18,23 @@
> > static DEFINE_SPINLOCK(krait_clock_reg_lock);
> > #define LPL_SHIFT 8
> > +#define SECCLKAGD BIT(4)
> > +
> > static void __krait_mux_set_sel(struct krait_mux_clk *mux, int sel)
> > {
> > unsigned long flags;
> > u32 regval;
> > spin_lock_irqsave(&krait_clock_reg_lock, flags);
> > +
> > regval = krait_get_l2_indirect_reg(mux->offset);
> > +
> > + /* 8064 Errata: disable sec_src clock gating during switch. */
> > + if (mux->disable_sec_src_gating) {
> > + regval |= SECCLKAGD;
> > + krait_set_l2_indirect_reg(mux->offset, regval);
> > + }
> > +
> > regval &= ~(mux->mask << mux->shift);
> > regval |= (sel & mux->mask) << mux->shift;
> > if (mux->lpl) {
> > @@ -33,6 +43,12 @@ static void __krait_mux_set_sel(struct krait_mux_clk *mux, int sel)
> > }
> > krait_set_l2_indirect_reg(mux->offset, regval);
> > + /* 8064 Errata: re-enabled sec_src clock gating. */
>
> And here too
>
> > + if (mux->disable_sec_src_gating) {
> > + regval &= ~SECCLKAGD;
> > + krait_set_l2_indirect_reg(mux->offset, regval);
> > + }
> > +
> > /* Wait for switch to complete. */
> > mb();
> > udelay(1);
> > diff --git a/drivers/clk/qcom/clk-krait.h b/drivers/clk/qcom/clk-krait.h
> > index 9120bd2f5297..f930538c539e 100644
> > --- a/drivers/clk/qcom/clk-krait.h
> > +++ b/drivers/clk/qcom/clk-krait.h
> > @@ -15,6 +15,7 @@ struct krait_mux_clk {
> > u8 safe_sel;
> > u8 old_index;
> > bool reparent;
> > + bool disable_sec_src_gating;
> > struct clk_hw hw;
> > struct notifier_block clk_nb;
> > diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c
> > index 1bdc89c097e6..533a770332be 100644
> > --- a/drivers/clk/qcom/krait-cc.c
> > +++ b/drivers/clk/qcom/krait-cc.c
> > @@ -154,6 +154,7 @@ krait_add_sec_mux(struct device *dev, struct clk *qsb, int id,
> > mux->shift = 2;
> > mux->parent_map = sec_mux_map;
> > mux->hw.init = &init;
> > + mux->disable_sec_src_gating = true;
> > init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
> > if (!init.name)
>
>
> --
> With best wishes
> Dmitry

--
Ansuel

\
 
 \ /
  Last update: 2022-03-14 13:49    [W:1.106 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site