lkml.org 
[lkml]   [2022]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 3/3] ARM: dts: lpc32xx: Update spi clock properties
From
On 2022-03-14 11:50, Vladimir Zapolskiy wrote:
> On 3/14/22 1:43 PM, Robin Murphy wrote:
>> On 2022-03-11 14:07, Vladimir Zapolskiy wrote:
>>> On 3/11/22 3:38 PM, Arnd Bergmann wrote:
>>>> On Fri, Mar 11, 2022 at 2:20 PM Vladimir Zapolskiy <vz@mleia.com>
>>>> wrote:
>>>>>
>>>>> On 3/11/22 11:38 AM, Kuldeep Singh wrote:
>>>>>> PL022 binding require two clocks to be defined but lpc platform
>>>>>> doesn't
>>>>>> comply with bindings and define only one clock i.e apb_pclk.
>>>>>>
>>>>>> Update spi clocks and clocks-names property by adding appropriate
>>>>>> clock
>>>>>> reference to make it compliant with bindings.
>>>>>>
>>>>>> CC: Vladimir Zapolskiy <vz@mleia.com>
>>>>>> Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
>>>>>> ---
>>>>>> v2:
>>>>>> - New patch with similar changeset
>>>>>> - Send to soc ML
>>>>>>
>>>>>>     arch/arm/boot/dts/lpc32xx.dtsi | 8 ++++----
>>>>>>     1 file changed, 4 insertions(+), 4 deletions(-)
>>>>>>
>>>>>> diff --git a/arch/arm/boot/dts/lpc32xx.dtsi
>>>>>> b/arch/arm/boot/dts/lpc32xx.dtsi
>>>>>> index c87066d6c995..30958e02d5e2 100644
>>>>>> --- a/arch/arm/boot/dts/lpc32xx.dtsi
>>>>>> +++ b/arch/arm/boot/dts/lpc32xx.dtsi
>>>>>> @@ -178,8 +178,8 @@ ssp0: spi@20084000 {
>>>>>>                                 compatible = "arm,pl022",
>>>>>> "arm,primecell";
>>>>>>                                 reg = <0x20084000 0x1000>;
>>>>>>                                 interrupts = <20
>>>>>> IRQ_TYPE_LEVEL_HIGH>;
>>>>>> -                             clocks = <&clk LPC32XX_CLK_SSP0>;
>>>>>> -                             clock-names = "apb_pclk";
>>>>>> +                             clocks = <&clk LPC32XX_CLK_SSP0>,
>>>>>> <&clk LPC32XX_CLK_SSP0>;
>>>>>> +                             clock-names = "sspclk", "apb_pclk";
>>>>>
>>>>> In fact I'm uncertain if it is the right change, could it happen that
>>>>> the commit
>>>>> cc0f6e96c4fd ("spi: dt-bindings: Convert Arm pl022 to json-schema")
>>>>> sets a wrong
>>>>> schema pattern?
>>>>
>>>> Good pointm this doesn't quite seem right: it is unlikely that the
>>>> same clock
>>>> is used for both the SPI bus and the APB bus.
>>>>
>>>>> Apparently just one clock is wanted on all observed platforms and
>>>>> cases, this
>>>>> is implicitly confirmed by clock handling in the
>>>>> drivers/spi/spi-pl022.c :
>>>>>
>>>>>           pl022->clk = devm_clk_get(&adev->dev, NULL);
>>>>>
>>>>> So, I would vote to fix the device tree bindings schema.
>>>>
>>>> Isn't this just using the wrong name? The name of the macro
>>>> LPC32XX_CLK_SSP0 might indicate that this is indeed the SPI clock
>>>> rather than the APB clock, so we only need to change clock-names
>>>> property here and leave it unchanged otherwise.
>>>
>>> Yes, the name is wrong, here I'm ready to take the blame:
>>>
>>> Fixes: 93898eb775e5 ("arm: dts: lpc32xx: add clock properties to device
>>> nodes")
>>>
>>> Noteworthy the commit above presets the same clock name to other
>>> PrimeCell
>>> controllers, namely pl110 (LCD), pl080 (DMA), pl175 (EMC) and pl18x
>>> (SD),
>>> plus this one pl022 (SSP), and all but SSP and SD are AHB slaves in
>>> fact.
>>>
>>> On LPC32xx the bus clock source and function clock source for SSP is
>>> HCLK.
>>>
>>> My guess is that the misnamed "apb_pclk" migrated into the schema from
>>> the lpc32xx.dtsi, so I'd suggest, unless some platform really needs it,
>>> firstly fix the schema by removing "apb_pclk" clock. It will leave
>>> just one
>>> clock, so "clock-names" property can be set as optional, and the drop
>>> the property from the lpc32xx.dtsi.
>>
>> No, "apb_pclk" is part of the common AMBA binding, and is required by
>> the "arm,primecell" compatible. You won't (usually) find it referenced
>> in drivers because it's dealt with by amba_get_enable_pclk() via
>> amba_probe().
>>
>
> Thank you, it explains, why "apb_pclk" is required for all PrimeCell
> controllers on the SoC. Nevertheless, in commit 93898eb775e5 it was
> misidentified with the sspclk clock, the latter one is the only clock
> explicitly utilized by the driver in 2015 and till today. Fixes in dts
> files should be preceded by a fix in the driver.

There's nothing to fix in the driver, though. In fact it can only be
working today because the Linux driver isn't very strict and simply
assumes that the first clock entry is SSPCLK *without* considering its
name (other consumers of the binding might be stricter; I don't know),
and because presumably the HCLK happens to be enabled already anyway.
Changing the driver behaviour would only stand to cause functional
regressions.

There are effectively two bugs in the DTS here, firstly that it only has
one clock entry when it should have two, and secondly that the clock
entry which *is* present has the wrong name (or the wrong clock
specifier, depending on how you look at it). Kuldeep's patch merely
fixes the first one by fully describing the way it's currently working
in practice, so it's really just a choice of whether to treat "respect
the binding" and "describe the hardware correctly" as separate issues
and have a follow-up patch to correctly reference HCLK as the second
clock, or whether they're trivial enough to squash together.

Robin.

\
 
 \ /
  Last update: 2022-03-14 13:36    [W:0.113 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site