lkml.org 
[lkml]   [2022]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.15 002/110] arm64: dts: qcom: sm8350: Correct UFS symbol clocks
Date
From: Bjorn Andersson <bjorn.andersson@linaro.org>

[ Upstream commit 0fd4dcb607ce29110d6c0b481a98c4ff3d300551 ]

The introduction of '9a61f813fcc8 ("clk: qcom: regmap-mux: fix parent
clock lookup")' broke UFS support on SM8350.

The cause for this is that the symbol clocks have a specified rate in
the "freq-table-hz" table in the UFS node, which causes the UFS code to
request a rate change, for which the "bi_tcxo" happens to provide the
closest rate. Prior to the change in regmap-mux it was determined
(incorrectly) that no change was needed and everything worked.

The rates of 75 and 300MHz matches the documentation for the symbol
clocks, but we don't represent the parent clocks today. So let's mimic
the configuration found in other platforms, by omitting the rate for the
symbol clocks as well to avoid the rate change.

While at it also fill in the dummy symbol clocks that was dropped from
the GCC driver as it was upstreamed.

Fixes: 59c7cf814783 ("arm64: dts: qcom: sm8350: Add UFS nodes")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211222162058.3418902-1-bjorn.andersson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 28 +++++++++++++++++++++++-----
1 file changed, 23 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 09d919793758..a8886adaaf37 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -35,6 +35,24 @@ sleep_clk: sleep-clk {
clock-frequency = <32000>;
#clock-cells = <0>;
};
+
+ ufs_phy_rx_symbol_0_clk: ufs-phy-rx-symbol-0 {
+ compatible = "fixed-clock";
+ clock-frequency = <1000>;
+ #clock-cells = <0>;
+ };
+
+ ufs_phy_rx_symbol_1_clk: ufs-phy-rx-symbol-1 {
+ compatible = "fixed-clock";
+ clock-frequency = <1000>;
+ #clock-cells = <0>;
+ };
+
+ ufs_phy_tx_symbol_0_clk: ufs-phy-tx-symbol-0 {
+ compatible = "fixed-clock";
+ clock-frequency = <1000>;
+ #clock-cells = <0>;
+ };
};

cpus {
@@ -462,9 +480,9 @@ gcc: clock-controller@100000 {
<0>,
<0>,
<0>,
- <0>,
- <0>,
- <0>,
+ <&ufs_phy_rx_symbol_0_clk>,
+ <&ufs_phy_rx_symbol_1_clk>,
+ <&ufs_phy_tx_symbol_0_clk>,
<0>,
<0>;
};
@@ -1082,8 +1100,8 @@ ufs_mem_hc: ufshc@1d84000 {
<75000000 300000000>,
<0 0>,
<0 0>,
- <75000000 300000000>,
- <75000000 300000000>;
+ <0 0>,
+ <0 0>;
status = "disabled";
};

--
2.34.1


\
 
 \ /
  Last update: 2022-03-14 13:12    [W:0.377 / U:0.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site