lkml.org 
[lkml]   [2022]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/4] drm/panel: Add panel driver for NewVision NV3052C based LCDs
Hi Christophe,

Le ven., mars 11 2022 at 18:02:38 +0100, Christophe Branchereau
<cbranchereau@gmail.com> a écrit :
> This driver supports the NewVision NV3052C based LCDs. Right now, it
> only supports the LeadTek LTK035C5444T 2.4" 640x480 TFT LCD panel,
> which
> can be found in the Anbernic RG-350M handheld console.
>
> Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
> ---
> drivers/gpu/drm/panel/Kconfig | 9 +
> drivers/gpu/drm/panel/Makefile | 1 +
> .../gpu/drm/panel/panel-newvision-nv3052c.c | 497
> ++++++++++++++++++
> 3 files changed, 507 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-newvision-nv3052c.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig
> b/drivers/gpu/drm/panel/Kconfig
> index bb2e47229c68..40084f709789 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -283,6 +283,15 @@ config DRM_PANEL_NEC_NL8048HL11
> panel (found on the Zoom2/3/3630 SDP boards). To compile this
> driver
> as a module, choose M here.
>
> +config DRM_PANEL_NEWVISION_NV3052C
> + tristate "NewVision NV3052C RGB/SPI panel"
> + depends on OF && SPI
> + depends on BACKLIGHT_CLASS_DEVICE
> + select DRM_MIPI_DBI
> + help
> + Say Y here if you want to enable support for the panels built
> + around the NewVision NV3052C display controller.
> +
> config DRM_PANEL_NOVATEK_NT35510
> tristate "Novatek NT35510 RGB panel driver"
> depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile
> b/drivers/gpu/drm/panel/Makefile
> index 5740911f637c..42a7ab54234b 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -26,6 +26,7 @@ obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) +=
> panel-leadtek-ltk500hd1829.o
> obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
> obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
> obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
> +obj-$(CONFIG_DRM_PANEL_NEWVISION_NV3052C) +=
> panel-newvision-nv3052c.o
> obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35510) += panel-novatek-nt35510.o
> obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35560) += panel-novatek-nt35560.o
> obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35950) += panel-novatek-nt35950.o
> diff --git a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
> b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
> new file mode 100644
> index 000000000000..fc31df0dee12
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
> @@ -0,0 +1,497 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * NevVision NV3052C IPS LCD panel driver

NewVision*

> + *
> + * Copyright (C) 2020, Paul Cercueil <paul@crapouillou.net>
> + * Copyright (C) 2022, Christophe Branchereau
> <cbranchereau@gmail.com>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/media-bus-format.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/spi/spi.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_mipi_dbi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +struct nv3052c_panel_info {
> + const struct drm_display_mode *display_modes;
> + unsigned int num_modes;
> + u16 width_mm, height_mm;
> + u32 bus_format, bus_flags;
> +};
> +
> +struct nv3052c {
> + struct device *dev;
> + struct drm_panel panel;
> + struct mipi_dbi dbi;
> +
> + const struct nv3052c_panel_info *panel_info;
> +
> + struct regulator *supply;
> + struct gpio_desc *reset_gpio;
> +};
> +
> +struct nv3052c_reg {
> + u8 cmd;
> + u8 val;
> +};
> +
> +static const struct nv3052c_reg nv3052c_panel_regs[] = {
> + { 0xff, 0x30 },
> + { 0xff, 0x52 },
> + { 0xff, 0x01 },
> + { 0xe3, 0x00 },
> + { 0x40, 0x00 },
> + { 0x03, 0x40 },
> + { 0x04, 0x00 },
> + { 0x05, 0x03 },
> + { 0x08, 0x00 },
> + { 0x09, 0x07 },
> + { 0x0a, 0x01 },
> + { 0x0b, 0x32 },
> + { 0x0c, 0x32 },
> + { 0x0d, 0x0b },
> + { 0x0e, 0x00 },
> + { 0x23, 0xa0 },
> +
> + { 0x24, 0x0c },
> + { 0x25, 0x06 },
> + { 0x26, 0x14 },
> + { 0x27, 0x14 },
> +
> + { 0x38, 0xcc },
> + { 0x39, 0xd7 },
> + { 0x3a, 0x4a },
> +
> + { 0x28, 0x40 },
> + { 0x29, 0x01 },
> + { 0x2a, 0xdf },
> + { 0x49, 0x3c },
> + { 0x91, 0x77 },
> + { 0x92, 0x77 },
> + { 0xa0, 0x55 },
> + { 0xa1, 0x50 },
> + { 0xa4, 0x9c },
> + { 0xa7, 0x02 },
> + { 0xa8, 0x01 },
> + { 0xa9, 0x01 },
> + { 0xaa, 0xfc },
> + { 0xab, 0x28 },
> + { 0xac, 0x06 },
> + { 0xad, 0x06 },
> + { 0xae, 0x06 },
> + { 0xaf, 0x03 },
> + { 0xb0, 0x08 },
> + { 0xb1, 0x26 },
> + { 0xb2, 0x28 },
> + { 0xb3, 0x28 },
> + { 0xb4, 0x33 },
> + { 0xb5, 0x08 },
> + { 0xb6, 0x26 },
> + { 0xb7, 0x08 },
> + { 0xb8, 0x26 },
> + { 0xf0, 0x00 },
> + { 0xf6, 0xc0 },
> +
> + { 0xff, 0x30 },
> + { 0xff, 0x52 },
> + { 0xff, 0x02 },
> + { 0xb0, 0x0b },
> + { 0xb1, 0x16 },
> + { 0xb2, 0x17 },
> + { 0xb3, 0x2c },
> + { 0xb4, 0x32 },
> + { 0xb5, 0x3b },
> + { 0xb6, 0x29 },
> + { 0xb7, 0x40 },
> + { 0xb8, 0x0d },
> + { 0xb9, 0x05 },
> + { 0xba, 0x12 },
> + { 0xbb, 0x10 },
> + { 0xbc, 0x12 },
> + { 0xbd, 0x15 },
> + { 0xbe, 0x19 },
> + { 0xbf, 0x0e },
> + { 0xc0, 0x16 },
> + { 0xc1, 0x0a },
> + { 0xd0, 0x0c },
> + { 0xd1, 0x17 },
> + { 0xd2, 0x14 },
> + { 0xd3, 0x2e },
> + { 0xd4, 0x32 },
> + { 0xd5, 0x3c },
> + { 0xd6, 0x22 },
> + { 0xd7, 0x3d },
> + { 0xd8, 0x0d },
> + { 0xd9, 0x07 },
> + { 0xda, 0x13 },
> + { 0xdb, 0x13 },
> + { 0xdc, 0x11 },
> + { 0xdd, 0x15 },
> + { 0xde, 0x19 },
> + { 0xdf, 0x10 },
> + { 0xe0, 0x17 },
> + { 0xe1, 0x0a },
> +
> + { 0xff, 0x30 },
> + { 0xff, 0x52 },
> + { 0xff, 0x03 },
> + { 0x00, 0x2a },
> + { 0x01, 0x2a },
> + { 0x02, 0x2a },
> + { 0x03, 0x2a },
> + { 0x04, 0x61 },
> + { 0x05, 0x80 },
> + { 0x06, 0xc7 },
> + { 0x07, 0x01 },
> + { 0x08, 0x03 },
> + { 0x09, 0x04 },
> + { 0x70, 0x22 },
> + { 0x71, 0x80 },
> + { 0x30, 0x2a },
> + { 0x31, 0x2a },
> + { 0x32, 0x2a },
> + { 0x33, 0x2a },
> + { 0x34, 0x61 },
> + { 0x35, 0xc5 },
> + { 0x36, 0x80 },
> + { 0x37, 0x23 },
> + { 0x40, 0x03 },
> + { 0x41, 0x04 },
> + { 0x42, 0x05 },
> + { 0x43, 0x06 },
> + { 0x44, 0x11 },
> + { 0x45, 0xe8 },
> + { 0x46, 0xe9 },
> + { 0x47, 0x11 },
> + { 0x48, 0xea },
> + { 0x49, 0xeb },
> + { 0x50, 0x07 },
> + { 0x51, 0x08 },
> + { 0x52, 0x09 },
> + { 0x53, 0x0a },
> + { 0x54, 0x11 },
> + { 0x55, 0xec },
> + { 0x56, 0xed },
> + { 0x57, 0x11 },
> + { 0x58, 0xef },
> + { 0x59, 0xf0 },
> + { 0xb1, 0x01 },
> + { 0xb4, 0x15 },
> + { 0xb5, 0x16 },
> + { 0xb6, 0x09 },
> + { 0xb7, 0x0f },
> + { 0xb8, 0x0d },
> + { 0xb9, 0x0b },
> + { 0xba, 0x00 },
> + { 0xc7, 0x02 },
> + { 0xca, 0x17 },
> + { 0xcb, 0x18 },
> + { 0xcc, 0x0a },
> + { 0xcd, 0x10 },
> + { 0xce, 0x0e },
> + { 0xcf, 0x0c },
> + { 0xd0, 0x00 },
> + { 0x81, 0x00 },
> + { 0x84, 0x15 },
> + { 0x85, 0x16 },
> + { 0x86, 0x10 },
> + { 0x87, 0x0a },
> + { 0x88, 0x0c },
> + { 0x89, 0x0e },
> + { 0x8a, 0x02 },
> + { 0x97, 0x00 },
> + { 0x9a, 0x17 },
> + { 0x9b, 0x18 },
> + { 0x9c, 0x0f },
> + { 0x9d, 0x09 },
> + { 0x9e, 0x0b },
> + { 0x9f, 0x0d },
> + { 0xa0, 0x01 },
> +
> + { 0xff, 0x30 },
> + { 0xff, 0x52 },
> + { 0xff, 0x02 },
> + { 0x01, 0x01 },
> + { 0x02, 0xda },
> + { 0x03, 0xba },
> + { 0x04, 0xa8 },
> + { 0x05, 0x9a },
> + { 0x06, 0x70 },
> + { 0x07, 0xff },
> + { 0x08, 0x91 },
> + { 0x09, 0x90 },
> + { 0x0a, 0xff },
> + { 0x0b, 0x8f },
> + { 0x0c, 0x60 },
> + { 0x0d, 0x58 },
> + { 0x0e, 0x48 },
> + { 0x0f, 0x38 },
> + { 0x10, 0x2b },
> +
> + { 0xff, 0x30 },
> + { 0xff, 0x52 },
> + { 0xff, 0x00 },
> + { 0x36, 0x0a },
> +};
> +
> +static inline struct nv3052c *to_nv3052c(struct drm_panel *panel)
> +{
> + return container_of(panel, struct nv3052c, panel);
> +}
> +
> +static int nv3052c_prepare(struct drm_panel *panel)
> +{
> + struct nv3052c *priv = to_nv3052c(panel);
> + struct mipi_dbi *dbi = &priv->dbi;
> + unsigned int i;
> + int err;
> +
> + err = regulator_enable(priv->supply);
> + if (err) {
> + dev_err(priv->dev, "Failed to enable power supply: %d\n", err);
> + return err;
> + }
> +
> + /* Reset the chip */
> + gpiod_set_value_cansleep(priv->reset_gpio, 1);
> + usleep_range(10, 1000);
> + gpiod_set_value_cansleep(priv->reset_gpio, 0);
> + msleep(5);
> +
> + for (i = 0; i < ARRAY_SIZE(nv3052c_panel_regs); i++) {
> + err = mipi_dbi_command(dbi, nv3052c_panel_regs[i].cmd,
> + nv3052c_panel_regs[i].val);
> +
> + if (err) {
> + dev_err(priv->dev, "Unable to set register: %d\n", err);
> + goto err_disable_regulator;
> + }
> + }
> +
> + err = mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE);
> + if (err) {
> + dev_err(priv->dev, "Unable to exit sleep mode: %d\n", err);
> + goto err_disable_regulator;
> + }
> +
> + return 0;
> +
> +err_disable_regulator:
> + regulator_disable(priv->supply);
> + return err;
> +}
> +
> +static int nv3052c_unprepare(struct drm_panel *panel)
> +{
> + struct nv3052c *priv = to_nv3052c(panel);
> + struct mipi_dbi *dbi = &priv->dbi;
> + int err;
> +
> + err = mipi_dbi_command(dbi, MIPI_DCS_ENTER_SLEEP_MODE);
> + if (err) {
> + dev_err(priv->dev, "Unable to enter sleep mode: %d\n", err);
> + return err;
> + }
> +
> + gpiod_set_value_cansleep(priv->reset_gpio, 1);
> + regulator_disable(priv->supply);
> +
> + return 0;
> +}
> +
> +static int nv3052c_enable(struct drm_panel *panel)
> +{
> + struct nv3052c *priv = to_nv3052c(panel);
> + struct mipi_dbi *dbi = &priv->dbi;
> + int err;
> +
> + err = mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON);
> + if (err) {
> + dev_err(priv->dev, "Unable to enable display: %d\n", err);
> + return err;
> + }
> +
> + if (panel->backlight) {
> + /* Wait for the picture to be ready before enabling backlight */
> + msleep(120);

From my own test this msleep can go. Modesets don't seem to cause any
graphical glitches.

The driver looks fine to me overall, I just need somebody else (Sam?)
to ack it before I can merge it.

Cheers,
-Paul

> + }
> +
> + return 0;
> +}
> +
> +static int nv3052c_disable(struct drm_panel *panel)
> +{
> + struct nv3052c *priv = to_nv3052c(panel);
> + struct mipi_dbi *dbi = &priv->dbi;
> + int err;
> +
> + err = mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_OFF);
> + if (err) {
> + dev_err(priv->dev, "Unable to disable display: %d\n", err);
> + return err;
> + }
> +
> + return 0;
> +}
> +
> +static int nv3052c_get_modes(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + struct nv3052c *priv = to_nv3052c(panel);
> + const struct nv3052c_panel_info *panel_info = priv->panel_info;
> + struct drm_display_mode *mode;
> + unsigned int i;
> +
> + for (i = 0; i < panel_info->num_modes; i++) {
> + mode = drm_mode_duplicate(connector->dev,
> + &panel_info->display_modes[i]);
> + if (!mode)
> + return -ENOMEM;
> +
> + drm_mode_set_name(mode);
> +
> + mode->type = DRM_MODE_TYPE_DRIVER;
> + if (panel_info->num_modes == 1)
> + mode->type |= DRM_MODE_TYPE_PREFERRED;
> +
> + drm_mode_probed_add(connector, mode);
> + }
> +
> + connector->display_info.bpc = 8;
> + connector->display_info.width_mm = panel_info->width_mm;
> + connector->display_info.height_mm = panel_info->height_mm;
> +
> + drm_display_info_set_bus_formats(&connector->display_info,
> + &panel_info->bus_format, 1);
> + connector->display_info.bus_flags = panel_info->bus_flags;
> +
> + return panel_info->num_modes;
> +}
> +
> +static const struct drm_panel_funcs nv3052c_funcs = {
> + .prepare = nv3052c_prepare,
> + .unprepare = nv3052c_unprepare,
> + .enable = nv3052c_enable,
> + .disable = nv3052c_disable,
> + .get_modes = nv3052c_get_modes,
> +};
> +
> +static int nv3052c_probe(struct spi_device *spi)
> +{
> + struct device *dev = &spi->dev;
> + struct nv3052c *priv;
> + int err;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->dev = dev;
> +
> + priv->panel_info = of_device_get_match_data(dev);
> + if (!priv->panel_info)
> + return -EINVAL;
> +
> + priv->supply = devm_regulator_get(dev, "power");
> + if (IS_ERR(priv->supply))
> + return dev_err_probe(dev, PTR_ERR(priv->supply), "Failed to get
> power supply\n");
> +
> + priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> + if (IS_ERR(priv->reset_gpio))
> + return dev_err_probe(dev, PTR_ERR(priv->reset_gpio), "Failed to
> get reset GPIO\n");
> +
> + err = mipi_dbi_spi_init(spi, &priv->dbi, NULL);
> + if (err)
> + return dev_err_probe(dev, err, "MIPI DBI init failed\n");
> +
> + priv->dbi.read_commands = NULL;
> +
> + spi_set_drvdata(spi, priv);
> +
> + drm_panel_init(&priv->panel, dev, &nv3052c_funcs,
> + DRM_MODE_CONNECTOR_DPI);
> +
> + err = drm_panel_of_backlight(&priv->panel);
> + if (err)
> + return dev_err_probe(dev, err, "Failed to attach backlight\n");
> +
> + drm_panel_add(&priv->panel);
> +
> + return 0;
> +}
> +
> +static int nv3052c_remove(struct spi_device *spi)
> +{
> + struct nv3052c *priv = spi_get_drvdata(spi);
> +
> + drm_panel_remove(&priv->panel);
> + drm_panel_disable(&priv->panel);
> + drm_panel_unprepare(&priv->panel);
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode ltk035c5444t_modes[] = {
> + { /* 60 Hz */
> + .clock = 24000,
> + .hdisplay = 640,
> + .hsync_start = 640 + 96,
> + .hsync_end = 640 + 96 + 16,
> + .htotal = 640 + 96 + 16 + 48,
> + .vdisplay = 480,
> + .vsync_start = 480 + 5,
> + .vsync_end = 480 + 5 + 2,
> + .vtotal = 480 + 5 + 2 + 13,
> + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> + },
> + { /* 50 Hz */
> + .clock = 18000,
> + .hdisplay = 640,
> + .hsync_start = 640 + 39,
> + .hsync_end = 640 + 39 + 2,
> + .htotal = 640 + 39 + 2 + 39,
> + .vdisplay = 480,
> + .vsync_start = 480 + 5,
> + .vsync_end = 480 + 5 + 2,
> + .vtotal = 480 + 5 + 2 + 13,
> + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> + },
> +};
> +
> +static const struct nv3052c_panel_info ltk035c5444t_panel_info = {
> + .display_modes = ltk035c5444t_modes,
> + .num_modes = ARRAY_SIZE(ltk035c5444t_modes),
> + .width_mm = 77,
> + .height_mm = 64,
> + .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> + .bus_flags = DRM_BUS_FLAG_DE_HIGH |
> DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
> +};
> +
> +static const struct of_device_id nv3052c_of_match[] = {
> + { .compatible = "leadtek,ltk035c5444t", .data =
> &ltk035c5444t_panel_info },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, nv3052c_of_match);
> +
> +static struct spi_driver nv3052c_driver = {
> + .driver = {
> + .name = "nv3052c",
> + .of_match_table = nv3052c_of_match,
> + },
> + .probe = nv3052c_probe,
> + .remove = nv3052c_remove,
> +};
> +module_spi_driver(nv3052c_driver);
> +
> +MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
> +MODULE_AUTHOR("Christophe Branchereau <cbranchereau@gmail.com>");
> +MODULE_LICENSE("GPL v2");
> --
> 2.35.1
>


\
 
 \ /
  Last update: 2022-03-14 20:55    [W:0.126 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site