lkml.org 
[lkml]   [2022]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mmc: sdhci-xenon: fix 1.8v regulator stabilization
On Monday 11 January 2021 19:06:24 Ulf Hansson wrote:
> On Fri, 11 Dec 2020 at 15:17, Marcin Wojtas <mw@semihalf.com> wrote:
> >
> > From: Alex Leibovich <alexl@marvell.com>
> >
> > Automatic Clock Gating is a feature used for the power
> > consumption optimisation. It turned out that
> > during early init phase it may prevent the stable voltage
> > switch to 1.8V - due to that on some platfroms an endless
> > printout in dmesg can be observed:
> > "mmc1: 1.8V regulator output did not became stable"
> > Fix the problem by disabling the ACG at very beginning
> > of the sdhci_init and let that be enabled later.
> >
> > Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality")
> > Signed-off-by: Alex Leibovich <alexl@marvell.com>
> > Signed-off-by: Marcin Wojtas <mw@semihalf.com>
> > Cc: stable@vger.kernel.org
>
> Applied for fixes (by fixing the typos), thanks!

Hello!

Is not this patch address same issue which was fixed by patch which was
merged earlier?

bb32e1987bc5 ("mmc: sdhci-xenon: fix annoying 1.8V regulator warning")
https://lore.kernel.org/linux-mmc/CAPDyKFqAsvgAjfL-c9ukFNWeGJmufQosR2Eg9SKjXMVpNitdkA@mail.gmail.com/

> Kind regards
> Uffe
>
>
> > ---
> > drivers/mmc/host/sdhci-xenon.c | 7 ++++++-
> > 1 file changed, 6 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
> > index c67611fdaa8a..4b05f6fdefb4 100644
> > --- a/drivers/mmc/host/sdhci-xenon.c
> > +++ b/drivers/mmc/host/sdhci-xenon.c
> > @@ -168,7 +168,12 @@ static void xenon_reset_exit(struct sdhci_host *host,
> > /* Disable tuning request and auto-retuning again */
> > xenon_retune_setup(host);
> >
> > - xenon_set_acg(host, true);
> > + /*
> > + * The ACG should be turned off at the early init time, in order
> > + * to solve a possile issues with the 1.8V regulator stabilization.
> > + * The feature is enabled in later stage.
> > + */
> > + xenon_set_acg(host, false);
> >
> > xenon_set_sdclk_off_idle(host, sdhc_id, false);
> >
> > --
> > 2.29.0
> >

\
 
 \ /
  Last update: 2022-03-14 16:41    [W:0.092 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site