lkml.org 
[lkml]   [2022]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v10 8/8] RISC-V: Enable RISC-V SBI CPU Idle driver for QEMU virt machine
On Tue, Feb 8, 2022 at 12:16 PM Guo Ren <guoren@kernel.org> wrote:
>
> Another question:
>
> Have you put "idle-states {" in qemu's DTS? or how do you test your patches?

I usually do the following:
1) Dump QEMU virt machine DTB
2) Convert QEMU virt machine DTB into DTS
3) Add "idle-states" in QEMU virt machine DTS
4) Create QEMU virt machine DTB with "idle-states"
5) Use the new QEMU virt machine DTB for testing this series.

Here's one of the DTS files which I used for testing on QEMU virt machine:

/dts-v1/;

/ {
#address-cells = <0x02>;
#size-cells = <0x02>;
compatible = "riscv-virtio";
model = "riscv-virtio,qemu";

chosen {
linux,initrd-end = <0x8855d200>;
linux,initrd-start = <0x88200000>;
bootargs = "root=/dev/ram rw console=ttyS0 earlycon";
stdout-path = "/soc/uart@10000000";
};

memory@80000000 {
device_type = "memory";
reg = <0x00 0x80000000 0x00 0x10000000>;
};

cpus {
#address-cells = <0x01>;
#size-cells = <0x00>;
timebase-frequency = <0x989680>;

cpu@0 {
phandle = <0x07>;
device_type = "cpu";
reg = <0x00>;
status = "okay";
compatible = "riscv";
riscv,isa = "rv64imafdcsu";
mmu-type = "riscv,sv48";
cpu-idle-states = <&CPU_NONRET_DEF>;

interrupt-controller {
#interrupt-cells = <0x01>;
interrupt-controller;
compatible = "riscv,cpu-intc";
phandle = <0x08>;
};
};

cpu@1 {
phandle = <0x05>;
device_type = "cpu";
reg = <0x01>;
status = "okay";
compatible = "riscv";
riscv,isa = "rv64imafdcsu";
mmu-type = "riscv,sv48";
cpu-idle-states = <&CPU_RET_DEF>;

interrupt-controller {
#interrupt-cells = <0x01>;
interrupt-controller;
compatible = "riscv,cpu-intc";
phandle = <0x06>;
};
};

cpu@2 {
phandle = <0x03>;
device_type = "cpu";
reg = <0x02>;
status = "okay";
compatible = "riscv";
riscv,isa = "rv64imafdcsu";
mmu-type = "riscv,sv48";
cpu-idle-states = <&CPU_NONRET_DEF>;

interrupt-controller {
#interrupt-cells = <0x01>;
interrupt-controller;
compatible = "riscv,cpu-intc";
phandle = <0x04>;
};
};

cpu@3 {
phandle = <0x01>;
device_type = "cpu";
reg = <0x03>;
status = "okay";
compatible = "riscv";
riscv,isa = "rv64imafdcsu";
mmu-type = "riscv,sv48";
cpu-idle-states = <&CPU_RET_DEF>;

interrupt-controller {
#interrupt-cells = <0x01>;
interrupt-controller;
compatible = "riscv,cpu-intc";
phandle = <0x02>;
};
};

cpu-map {

cluster0 {

core0 {
cpu = <0x07>;
};

core1 {
cpu = <0x05>;
};

core2 {
cpu = <0x03>;
};

core3 {
cpu = <0x01>;
};
};
};

idle-states {
CPU_RET_DEF: cpu-retentive-default {
compatible = "riscv,idle-state";
riscv,sbi-suspend-param = <0x00000000>;
entry-latency-us = <10>;
exit-latency-us = <10>;
min-residency-us = <100>;
};

CPU_NONRET_DEF: cpu-nonretentive-default {
compatible = "riscv,idle-state";
riscv,sbi-suspend-param = <0x80000000>;
entry-latency-us = <100>;
exit-latency-us = <100>;
min-residency-us = <1000>;
};
};
};

soc {
#address-cells = <0x02>;
#size-cells = <0x02>;
compatible = "simple-bus";
ranges;

flash@20000000 {
bank-width = <0x04>;
reg = <0x00 0x20000000 0x00 0x2000000 0x00 0x22000000 0x00
0x2000000>;
compatible = "cfi-flash";
};

rtc@101000 {
interrupts = <0x0b>;
interrupt-parent = <0x09>;
reg = <0x00 0x101000 0x00 0x1000>;
compatible = "google,goldfish-rtc";
};

uart@10000000 {
interrupts = <0x0a>;
interrupt-parent = <0x09>;
clock-frequency = <0x384000>;
reg = <0x00 0x10000000 0x00 0x100>;
compatible = "ns16550a";
};

poweroff {
value = <0x5555>;
offset = <0x00>;
regmap = <0x0a>;
compatible = "syscon-poweroff";
};

reboot {
value = <0x7777>;
offset = <0x00>;
regmap = <0x0a>;
compatible = "syscon-reboot";
};

test@100000 {
phandle = <0x0a>;
reg = <0x00 0x100000 0x00 0x1000>;
compatible = "sifive,test1\0sifive,test0\0syscon";
};

pci@30000000 {
interrupt-map-mask = <0x1800 0x00 0x00 0x07>;
interrupt-map = <0x00 0x00 0x00 0x01 0x09 0x20 0x00 0x00
0x00 0x02 0x09 0x21 0x00 0x00 0x00 0x03 0x09 0x22 0x00 0x00 0x00 0x04
0x09 0x23 0x800 0x00 0x00 0x01 0x09 0x21 0x800 0x00 0x00 0x02 0x09
0x22 0x800 0x00 0x00 0x03 0x09 0x23 0x800 0x00 0x00 0x04 0x09 0x20
0x1000 0x00 0x00 0x01 0x09 0x22 0x1000 0x00 0x00 0x02 0x09 0x23 0x1000
0x00 0x00 0x03 0x09 0x20 0x1000 0x00 0x00 0x04 0x09 0x21 0x1800 0x00
0x00 0x01 0x09 0x23 0x1800 0x00 0x00 0x02 0x09 0x20 0x1800 0x00 0x00
0x03 0x09 0x21 0x1800 0x00 0x00 0x04 0x09 0x22>;
ranges = <0x1000000 0x00 0x00 0x00 0x3000000 0x00 0x10000
0x2000000 0x00 0x40000000 0x00 0x40000000 0x00 0x40000000>;
reg = <0x00 0x30000000 0x00 0x10000000>;
dma-coherent;
bus-range = <0x00 0xff>;
linux,pci-domain = <0x00>;
device_type = "pci";
compatible = "pci-host-ecam-generic";
#size-cells = <0x02>;
#interrupt-cells = <0x01>;
#address-cells = <0x03>;
};

virtio_mmio@10008000 {
interrupts = <0x08>;
interrupt-parent = <0x09>;
reg = <0x00 0x10008000 0x00 0x1000>;
compatible = "virtio,mmio";
};

virtio_mmio@10007000 {
interrupts = <0x07>;
interrupt-parent = <0x09>;
reg = <0x00 0x10007000 0x00 0x1000>;
compatible = "virtio,mmio";
};

virtio_mmio@10006000 {
interrupts = <0x06>;
interrupt-parent = <0x09>;
reg = <0x00 0x10006000 0x00 0x1000>;
compatible = "virtio,mmio";
};

virtio_mmio@10005000 {
interrupts = <0x05>;
interrupt-parent = <0x09>;
reg = <0x00 0x10005000 0x00 0x1000>;
compatible = "virtio,mmio";
};

virtio_mmio@10004000 {
interrupts = <0x04>;
interrupt-parent = <0x09>;
reg = <0x00 0x10004000 0x00 0x1000>;
compatible = "virtio,mmio";
};

virtio_mmio@10003000 {
interrupts = <0x03>;
interrupt-parent = <0x09>;
reg = <0x00 0x10003000 0x00 0x1000>;
compatible = "virtio,mmio";
};

virtio_mmio@10002000 {
interrupts = <0x02>;
interrupt-parent = <0x09>;
reg = <0x00 0x10002000 0x00 0x1000>;
compatible = "virtio,mmio";
};

virtio_mmio@10001000 {
interrupts = <0x01>;
interrupt-parent = <0x09>;
reg = <0x00 0x10001000 0x00 0x1000>;
compatible = "virtio,mmio";
};

plic@c000000 {
phandle = <0x09>;
riscv,ndev = <0x35>;
reg = <0x00 0xc000000 0x00 0x210000>;
interrupts-extended = <0x08 0x0b 0x08 0x09 0x06 0x0b 0x06
0x09 0x04 0x0b 0x04 0x09 0x02 0x0b 0x02 0x09>;
interrupt-controller;
compatible = "riscv,plic0";
#interrupt-cells = <0x01>;
#address-cells = <0x00>;
};

clint@2000000 {
interrupts-extended = <0x08 0x03 0x08 0x07 0x06 0x03 0x06
0x07 0x04 0x03 0x04 0x07 0x02 0x03 0x02 0x07>;
reg = <0x00 0x2000000 0x00 0x10000>;
compatible = "riscv,clint0";
};
};
};

Regards,
Anup

\
 
 \ /
  Last update: 2022-02-08 09:55    [W:0.068 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site