lkml.org 
[lkml]   [2022]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 3/3] arm64: dts: qcom: sc7280: Add wcd9380 pinmux
Quoting Srinivasa Rao Mandadapu (2022-02-08 07:34:14)
> Add pinmux to reset wcd codec, conneceted on SC7280 based platforms.
>
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
> Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
> Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> index 4704a93..6b38fa1 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> @@ -594,6 +594,21 @@
> */
> bias-pull-up;
> };
> +
> + wcd938x_reset_active: wcd938x_reset_active {

No underscore in node names.

> + pins = "gpio83";
> + function = "gpio";
> + drive-strength = <16>;
> + output-high;
> + };
> +
> + wcd938x_reset_sleep: wcd938x_reset_sleep {
> + pins = "gpio83";
> + function = "gpio";
> + drive-strength = <16>;
> + bias-disable;
> + output-low;

Why doesn't the device drive the reset gpio by requesting the gpio and
asserting and deasserting it? We shouldn't need to use pinctrl settings
to toggle reset gpios.

\
 
 \ /
  Last update: 2022-02-08 23:30    [W:0.294 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site