lkml.org 
[lkml]   [2022]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 41/74] net: macsec: Verify that send_sci is on when setting Tx sci explicitly
Date
From: Lior Nahmanson <liorna@nvidia.com>

commit d0cfa548dbde354de986911d3913897b5448faad upstream.

When setting Tx sci explicit, the Rx side is expected to use this
sci and not recalculate it from the packet.However, in case of Tx sci
is explicit and send_sci is off, the receiver is wrongly recalculate
the sci from the source MAC address which most likely be different
than the explicit sci.

Fix by preventing such configuration when macsec newlink is established
and return EINVAL error code on such cases.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/macsec.c | 9 +++++++++
1 file changed, 9 insertions(+)

--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -4017,6 +4017,15 @@ static int macsec_newlink(struct net *ne
!macsec_check_offload(macsec->offload, macsec))
return -EOPNOTSUPP;

+ /* send_sci must be set to true when transmit sci explicitly is set */
+ if ((data && data[IFLA_MACSEC_SCI]) &&
+ (data && data[IFLA_MACSEC_INC_SCI])) {
+ u8 send_sci = !!nla_get_u8(data[IFLA_MACSEC_INC_SCI]);
+
+ if (!send_sci)
+ return -EINVAL;
+ }
+
if (data && data[IFLA_MACSEC_ICV_LEN])
icv_len = nla_get_u8(data[IFLA_MACSEC_ICV_LEN]);
mtu = real_dev->mtu - icv_len - macsec_extra_len(true);

\
 
 \ /
  Last update: 2022-02-07 14:10    [W:0.356 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site