Messages in this thread | | | Date | Mon, 7 Feb 2022 10:46:29 +0100 | Subject | Re: [PATCH v2 0/2] new emtrion hardware emSBC-Argon | From | Alexandre TORGUE <> |
| |
Hi Reinhold
On 12/9/21 11:49, reinhold.mueller@emtrion.com wrote: > From: Reinhold Mueller <reinhold.mueller@emtrion.com> > > This patch series adds support for the emtrion emSBC-Argon > > Changes > > v2: > [PATCH 1/2] > - replaced enum by const > [PATCH 2/2] > - no fixes > > v1: > [PATCH 0/2] > - split former patch in dts -and yaml patches > [PATCH 1/2] > - no fixes > [PATCH 2/2] > - small modification in subject name > - node name for leds moved to led-X > - update of clocknames removed, > already defined in stm32mp151.dtsi > - removing some unneeded entries status = "disabled" > - moved pin configurations to stm32mp15-pinctrl > > Reinhold Mueller (2): > dt-binding: arm/stm32: Add emtrion hardware emSBC-Argon > ARM: dts: stm32: Add support for the emtrion emSBC-Argon > > .../devicetree/bindings/arm/stm32/stm32.yaml | 6 + > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 92 +++ > arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts | 53 ++ > .../boot/dts/stm32mp157c-emstamp-argon.dtsi | 552 ++++++++++++++++++ > 5 files changed, 704 insertions(+) > create mode 100644 arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts > create mode 100644 arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi >
Thanks to add new STM32 board! Series applied on stm32-next.
Arnd, This series introduces new dtbs_check errors mainly because it re-use nodes from existing STM32 boards. I think it is acceptable to merge it as it is not "new' errors but replication of existing errors.
Thanks Alex
| |