lkml.org 
[lkml]   [2022]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/2] Add I2C bus recovery support on Kunpeng 920/930
From
Date
a friendly ping ...

Hi Designware maintainers and Wolfram, any comments for this?

thanks.

On 2022/1/25 20:49, Yicong Yang wrote:
> This series adds the I2C bus recovery support on Kunpeng 920/930.
> We're using HiSilicon I2C controller on Kunpeng 930 and Designware
> I2C controller on Kunpeng 920. For both platform, the SCL/SDA pins
> are multiplexed with GPIOs. Both driver use generic GPIO recovery
> method and we need to switch the pin mutiplexing before/after the
> recovery process. We use ACPI method to help on the pin mux switching
> which is also introduced in this series.
>
> Yicong Yang (2):
> i2c: hisi: Add generic GPIO bus recovery support
> i2c: designware: Add ACPI assisted recovery support
>
> drivers/i2c/busses/i2c-designware-core.h | 2 +
> drivers/i2c/busses/i2c-designware-master.c | 84 ++++++++++++++++++++-
> drivers/i2c/busses/i2c-designware-platdrv.c | 6 +-
> drivers/i2c/busses/i2c-hisi.c | 78 +++++++++++++++++++
> 4 files changed, 164 insertions(+), 6 deletions(-)
>

\
 
 \ /
  Last update: 2022-02-07 09:09    [W:0.131 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site