lkml.org 
[lkml]   [2022]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: (EXT) [RFC PATCH v4 03/12] dt-bindings: media: Add bindings for bcm2835-unicam
Hi Alexander,

On Fri, Feb 04, 2022 at 09:50:06AM +0100, Alexander Stein wrote:
> Am Donnerstag, 3. Februar 2022, 18:50:00 CET schrieb Jean-Michel Hautbois:
> > Introduce the dt-bindings documentation for bcm2835 CCP2/CSI2 Unicam
> > camera interface. Also add a MAINTAINERS entry for it.
> >
> > Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> > Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
> > Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
> >
> > ---
> > v4:
> > - make MAINTAINERS its own patch
> > - describe the reg and clocks correctly
> > - use a vendor entry for the number of data lanes
> > ---
> > .../bindings/media/brcm,bcm2835-unicam.yaml | 110 ++++++++++++++++++
> > 1 file changed, 110 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
> > b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml new file
> > mode 100644
> > index 000000000000..0725a0267c60
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
> > @@ -0,0 +1,110 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/brcm,bcm2835-unicam.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Broadcom BCM283x Camera Interface (Unicam)
> > +
> > +maintainers:
> > + - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
> > +
> > +description: |-
> > + The Unicam block on BCM283x SoCs is the receiver for either
> > + CSI-2 or CCP2 data from image sensors or similar devices.
> > +
> > + The main platform using this SoC is the Raspberry Pi family of boards.
> > + On the Pi the VideoCore firmware can also control this hardware block,
> > + and driving it from two different processors will cause issues.
> > + To avoid this, the firmware checks the device tree configuration
> > + during boot. If it finds device tree nodes starting by csi then
> > + it will stop the firmware accessing the block, and it can then
> > + safely be used via the device tree binding.
> > +
> > +properties:
> > + compatible:
> > + const: brcm,bcm2835-unicam
> > +
> > + reg:
> > + items:
> > + - description: Unicam block.
> > + - description: Clock Manager Image (CMI) block.
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + items:
> > + - description: Clock to drive the LP state machine of Unicam.
> > + - description: Clock for the vpu (core clock).
> > +
> > + clock-names:
> > + items:
> > + - const: lp
> > + - const: vpu
> > +
> > + power-domains:
> > + items:
> > + - description: Unicam power domain
> > +
> > + brcm,num-data-lanes:
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + enum: [ 2, 4 ]
> > + description: Number of data lanes on the csi bus
>
> There is already data-lanes in Documentation/devicetree/bindings/media/video-
> interfaces.yaml. AFAICS these two are identical. Can't the video-
> interface.yaml be used for this? I'm no expert TBH.

This is the number of data lanes that the Unicam instance supports.
There are two Unicam instances, and they can have 2 or 4 data lanes
depending on the SoC. The data-lanes endpoint property indicates the
number of lanes used on a particular board.

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2022-02-05 03:24    [W:0.137 / U:0.928 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site