lkml.org 
[lkml]   [2022]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 1/2] remoteproc: Introduce deny_sysfs_ops flag
Hi Puranjay,

On Mon, Jan 31, 2022 at 07:41:51PM +0530, Puranjay Mohan wrote:
> The remoteproc framework provides sysfs interfaces for changing
> the firmware name and for starting/stopping a remote processor
> through the sysfs files 'state' and 'firmware'. The 'recovery'
> sysfs file can also be used similarly to control the error recovery
> state machine of a remoteproc. These interfaces are currently
> allowed irrespective of how the remoteprocs were booted (like
> remoteproc self auto-boot, remoteproc client-driven boot etc).
> These interfaces can adversely affect a remoteproc and its clients
> especially when a remoteproc is being controlled by a remoteproc
> client driver(s). Also, not all remoteproc drivers may want to
> support the sysfs interfaces by default.
>
> Add support to deny the sysfs state/firmware/recovery change by
> introducing a state flag 'deny_sysfs_ops' that the individual
> remoteproc drivers can set based on their usage needs. The default
> behavior is to allow the sysfs operations as before.
>
> Implement attribute_group->is_visible() to hide the sysfs
> state/firmware/recovery entries when deny_sysfs_ops flag is set.
>

The address in the "To:" field of this email doesn't match the one in the SoB,
Something that makes checkpatch angry.

> Signed-off-by: Puranjay Mohan <p-mohan@ti.com>
> ---
> drivers/remoteproc/remoteproc_sysfs.c | 18 +++++++++++++++++-
> include/linux/remoteproc.h | 2 ++
> 2 files changed, 19 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/remoteproc/remoteproc_sysfs.c b/drivers/remoteproc/remoteproc_sysfs.c
> index ea8b89f97d7b..4a41abdd1f7b 100644
> --- a/drivers/remoteproc/remoteproc_sysfs.c
> +++ b/drivers/remoteproc/remoteproc_sysfs.c
> @@ -230,6 +230,21 @@ static ssize_t name_show(struct device *dev, struct device_attribute *attr,
> }
> static DEVICE_ATTR_RO(name);
>
> +static umode_t rproc_is_visible(struct kobject *kobj, struct attribute *attr,
> + int n)
> +{
> + struct device *dev = kobj_to_dev(kobj);
> + struct rproc *rproc = to_rproc(dev);
> + umode_t mode = attr->mode;
> +
> + if (rproc->deny_sysfs_ops && (attr == &dev_attr_recovery.attr ||
> + attr == &dev_attr_firmware.attr ||
> + attr == &dev_attr_state.attr))

I toyed with this solution for a little while. I think the use case is valid
but hiding the above options will also result in a system that is difficult to
use (and debug) because they convey important information.

I suggest introducing a new kernel configuration options to make the attributes
of the rproc_devgroup return -EINVAL when it is set. So in remoteproc_sysfs.c
do something like:

#if CONFIG_REMOTEPROC_SYSFS_RO
static bool option_is_read_only()
{
return true;
}
#else
static bool option_is_read_only()
{
return false;
}
#endif

[...]

static ssize_t recovery_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct rproc *rproc = to_rproc(dev);

if (option_is_read_only())
return -EINVAL;

if (sysfs_streq(buf, "enabled")) {
/* change the flag and begin the recovery process if needed */
rproc->recovery_disabled = false;
rproc_trigger_recovery(rproc);
} else if (sysfs_streq(buf, "disabled")) {
rproc->recovery_disabled = true;
} else if (sysfs_streq(buf, "recover")) {
/* begin the recovery process without changing the flag */
rproc_trigger_recovery(rproc);
} else {
return -EINVAL;
}

return count;
}

Thanks,
Mathieu

> + mode = 0;
> +
> + return mode;
> +}
> +
> static struct attribute *rproc_attrs[] = {
> &dev_attr_coredump.attr,
> &dev_attr_recovery.attr,
> @@ -240,7 +255,8 @@ static struct attribute *rproc_attrs[] = {
> };
>
> static const struct attribute_group rproc_devgroup = {
> - .attrs = rproc_attrs
> + .attrs = rproc_attrs,
> + .is_visible = rproc_is_visible,
> };
>
> static const struct attribute_group *rproc_devgroups[] = {
> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> index e0600e1e5c17..3849c66ce38f 100644
> --- a/include/linux/remoteproc.h
> +++ b/include/linux/remoteproc.h
> @@ -523,6 +523,7 @@ struct rproc_dump_segment {
> * @table_sz: size of @cached_table
> * @has_iommu: flag to indicate if remote processor is behind an MMU
> * @auto_boot: flag to indicate if remote processor should be auto-started
> + * @deny_sysfs_ops: flag to not permit sysfs operations on state, firmware and recovery
> * @dump_segments: list of segments in the firmware
> * @nb_vdev: number of vdev currently handled by rproc
> * @elf_class: firmware ELF class
> @@ -562,6 +563,7 @@ struct rproc {
> size_t table_sz;
> bool has_iommu;
> bool auto_boot;
> + bool deny_sysfs_ops;
> struct list_head dump_segments;
> int nb_vdev;
> u8 elf_class;
> --
> 2.24.3
>

\
 
 \ /
  Last update: 2022-02-03 19:37    [W:0.075 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site