lkml.org 
[lkml]   [2022]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH 1/2] arm64: dts: ti: k3-am65: disable optional peripherals by default
From
On 03.02.22 14:06, Matthias Schiffer wrote:
> On Thu, 2022-02-03 at 12:39 +0100, Jan Kiszka wrote:
>> On 02.02.22 21:32, Nishanth Menon wrote:
>>> On 12:25-20220111, Matthias Schiffer wrote:
>>>> All peripharals that require pinmuxing or other configuration to
>>>> work
>>>> should be disabled by default. Dependent DTS are adjusted
>>>> accordingly.
>>>>
>>>> The following nodes are now "disabled" according to dtx_diff and
>>>> were not
>>>> overridden to "okay", as they define no pinctrl:
>>>>
>>>> k3-am654-base-board:
>>>> - mcu_i2c0
>>>> - mcu_spi0..2
>>>> - cal
>>>> - main_i2c3
>>>> - ehrpwm0..5
>>>> - main_uart1..2
>>>> - main_spi1..4
>>>>
>>>> k3-am65-iot2050*:
>>>> - mci_spi1..2
>>>> - cal
>>>> - ehrpwm0..5
>>>> - main_spi0..4
>>>>
>>>> Signed-off-by: Matthias Schiffer <
>>>> matthias.schiffer@ew.tq-group.com>
>>>
>>> Jan: you ok with this series? Please ack.
>>>
>>
>> Just rebased the still-too-long backlog to our system fully working
>> over
>> mainline.
>
> Thanks for testing. As noted earlier, I will send a v2 of this patch
> that fixes one more inconsistency.
>
>> Basically looks good, but this might be a regression of the
>> patch:
>>
>> [ 1.810083] OF: /bus@100000/pcie@5600000: phandle pcie-mode@4070
>> needs 1, found 0
>> ...
>> [ 1.854840] OF: /bus@100000/pcie@5600000: phandle pcie-devid@210
>> needs 1, found 0
>>
>> Jan
>>
>
> That seems to be an older issue, rather than a regression of this
> patch:
>
> k3-am65-main.dtsi defines:
>
> ti,syscon-pcie-id = <&pcie_devid>;
> ti,syscon-pcie-mode = <&pcie0_mode>
>
> While according the driver binding docs something like the following is
> expected:
>
> ti,syscon-pcie-id = <&scm_conf 0x0210>;
> ti,syscon-pcie-mode = <&scm_conf 0x4060>;
>
> I assume that the k3-am65-main.dtsi section was imported from ti-linux
> without accounting for the mainline driver's different binding.
>

Yep, 7dcf07ac88676a365ce3245b44af2be432f21120 caused it, and this seems
to be the fix (though I cannot find a negative impact yet, except for
the warning):

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 09cfdc72c64b..be79c0bc1776 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -694,8 +694,8 @@ pcie0_rc: pcie@5500000 {
#size-cells = <2>;
ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000>,
<0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>;
- ti,syscon-pcie-id = <&pcie_devid>;
- ti,syscon-pcie-mode = <&pcie0_mode>;
+ ti,syscon-pcie-id = <&scm_conf 0x0210>;
+ ti,syscon-pcie-mode = <&scm_conf 0x4060>;
bus-range = <0x0 0xff>;
num-viewport = <16>;
max-link-speed = <2>;
@@ -723,7 +723,7 @@ pcie0_ep: pcie-ep@5500000 {
reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>;
reg-names = "app", "dbics", "addr_space", "atu";
power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
- ti,syscon-pcie-mode = <&pcie0_mode>;
+ ti,syscon-pcie-mode = <&scm_conf 0x4060>;
num-ib-windows = <16>;
num-ob-windows = <16>;
max-link-speed = <2>;
@@ -740,8 +740,8 @@ pcie1_rc: pcie@5600000 {
#size-cells = <2>;
ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000>,
<0x82000000 0 0x18030000 0x0 0x18030000 0 0x07FD0000>;
- ti,syscon-pcie-id = <&pcie_devid>;
- ti,syscon-pcie-mode = <&pcie1_mode>;
+ ti,syscon-pcie-id = <&scm_conf 0x0210>;
+ ti,syscon-pcie-mode = <&scm_conf 0x4070>;
bus-range = <0x0 0xff>;
num-viewport = <16>;
max-link-speed = <2>;
@@ -769,7 +769,7 @@ pcie1_ep: pcie-ep@5600000 {
reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>;
reg-names = "app", "dbics", "addr_space", "atu";
power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
- ti,syscon-pcie-mode = <&pcie1_mode>;
+ ti,syscon-pcie-mode = <&scm_conf 0x4070>;
num-ib-windows = <16>;
num-ob-windows = <16>;
max-link-speed = <2>;
Jan

--
Siemens AG, Technology
Competence Center Embedded Linux

\
 
 \ /
  Last update: 2022-02-03 18:28    [W:1.129 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site