lkml.org 
[lkml]   [2022]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 09/16] ARM: dts: stm32: keep uart nodes behavior on stm32mp157a-stinger96
Date
DMA configuration is added to uart nodes in stm32mp15x device tree.
Delete uart4 DMA property in stm32mp157a-stinger96 board device tree to
keep console in irq mode, as DMA support for console has been removed
from the driver by commit e359b4411c28 ("serial: stm32: fix threaded
interrupt handling").
Delete also usart2 and uart7 DMA property to keep current behavior.

Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>

diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
index a4b14ef3caee..3a36f7fe0a2c 100644
--- a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
@@ -288,6 +288,8 @@
pinctrl-0 = <&usart2_pins_b>;
pinctrl-1 = <&usart2_sleep_pins_b>;
st,hw-flow-ctrl;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};

@@ -296,6 +298,8 @@
pinctrl-names = "default";
pinctrl-0 = <&uart4_pins_c>;
st,hw-flow-ctrl;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};

@@ -303,6 +307,8 @@
&uart7 {
pinctrl-names = "default";
pinctrl-0 = <&uart7_pins_b>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
status = "okay";
};

--
2.17.1
\
 
 \ /
  Last update: 2022-02-03 18:15    [W:0.100 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site