lkml.org 
[lkml]   [2022]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 1/1] serial: 8250_pericom: Revert "Re-enable higher baud rates"
Date
UPF_MAGIC_MULTIPLIER is userspace available bit and can be changed
at any time. There is no sense to rely on it to be always present.

This reverts commit b4ccaf5aa2d795ee7f47a6eeb209f3de981e1929.

Note, that code was not reliably worked before, hence it implies
no functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/tty/serial/8250/8250_pericom.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_pericom.c b/drivers/tty/serial/8250/8250_pericom.c
index 025b055363c3..95ff10f25d58 100644
--- a/drivers/tty/serial/8250/8250_pericom.c
+++ b/drivers/tty/serial/8250/8250_pericom.c
@@ -117,7 +117,7 @@ static int pericom8250_probe(struct pci_dev *pdev, const struct pci_device_id *i
uart.port.private_data = pericom;
uart.port.iotype = UPIO_PORT;
uart.port.uartclk = 921600 * 16;
- uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ | UPF_MAGIC_MULTIPLIER;
+ uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
uart.port.set_divisor = pericom_do_set_divisor;
for (i = 0; i < nr && i < maxnr; i++) {
unsigned int offset = (i == 3 && nr == 4) ? 0x38 : i * 0x8;
--
2.34.1
\
 
 \ /
  Last update: 2022-02-03 16:00    [W:0.297 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site