lkml.org 
[lkml]   [2022]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.15 091/139] bnxt_en: Increase firmware message response DMA wait time
Date
From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit b891106da52b2c12dbaf73400f6d225b06a38d80 ]

When polling for the firmware message response, we first poll for the
response message header. Once the valid length is detected in the
header, we poll for the valid bit at the end of the message which
signals DMA completion. Normally, this poll time for DMA completion
is extremely short (0 to a few usec). But on some devices under some
rare conditions, it can be up to about 20 msec.

Increase this delay to 50 msec and use udelay() for the first 10 usec
for the common case, and usleep_range() beyond that.

Also, change the error message to include the above delay time when
printing the timeout value.

Fixes: 3c8c20db769c ("bnxt_en: move HWRM API implementation into separate file")
Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c | 12 +++++++++---
drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h | 2 +-
2 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c
index 8171f4912fa01..3a0eeb3737767 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c
@@ -595,18 +595,24 @@ static int __hwrm_send(struct bnxt *bp, struct bnxt_hwrm_ctx *ctx)

/* Last byte of resp contains valid bit */
valid = ((u8 *)ctx->resp) + len - 1;
- for (j = 0; j < HWRM_VALID_BIT_DELAY_USEC; j++) {
+ for (j = 0; j < HWRM_VALID_BIT_DELAY_USEC; ) {
/* make sure we read from updated DMA memory */
dma_rmb();
if (*valid)
break;
- usleep_range(1, 5);
+ if (j < 10) {
+ udelay(1);
+ j++;
+ } else {
+ usleep_range(20, 30);
+ j += 20;
+ }
}

if (j >= HWRM_VALID_BIT_DELAY_USEC) {
if (!(ctx->flags & BNXT_HWRM_CTX_SILENT))
netdev_err(bp->dev, "Error (timeout: %u) msg {0x%x 0x%x} len:%d v:%d\n",
- hwrm_total_timeout(i),
+ hwrm_total_timeout(i) + j,
le16_to_cpu(ctx->req->req_type),
le16_to_cpu(ctx->req->seq_id), len,
*valid);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h
index 9a9fc4e8041b6..380ef69afb51b 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h
@@ -94,7 +94,7 @@ static inline unsigned int hwrm_total_timeout(unsigned int n)
}


-#define HWRM_VALID_BIT_DELAY_USEC 150
+#define HWRM_VALID_BIT_DELAY_USEC 50000

static inline bool bnxt_cfa_hwrm_message(u16 req_type)
{
--
2.34.1


\
 
 \ /
  Last update: 2022-02-28 18:59    [W:0.310 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site