lkml.org 
[lkml]   [2022]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 22/80] bnxt_en: Fix active FEC reporting to ethtool
Date
From: Somnath Kotur <somnath.kotur@broadcom.com>

commit 84d3c83e6ea7d46cf3de3a54578af73eb24a64f2 upstream.

ethtool --show-fec <interface> does not show anything when the Active
FEC setting in the chip is set to None. Fix it to properly return
ETHTOOL_FEC_OFF in that case.

Fixes: 8b2775890ad8 ("bnxt_en: Report FEC settings to ethtool.")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 3 +++
1 file changed, 3 insertions(+)

--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -1926,6 +1926,9 @@ static int bnxt_get_fecparam(struct net_
case PORT_PHY_QCFG_RESP_ACTIVE_FEC_FEC_RS272_IEEE_ACTIVE:
fec->active_fec |= ETHTOOL_FEC_LLRS;
break;
+ case PORT_PHY_QCFG_RESP_ACTIVE_FEC_FEC_NONE_ACTIVE:
+ fec->active_fec |= ETHTOOL_FEC_OFF;
+ break;
}
return 0;
}

\
 
 \ /
  Last update: 2022-02-28 18:46    [W:0.167 / U:2.700 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site