lkml.org 
[lkml]   [2022]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 05/11] usb: dwc3: core: do not use 3.0 clock when operating in 2.0 mode
Date
From: Bin Yang <yangbin@rock-chips.com>

In the 3.0 device core, if the core is programmed to operate in
2.0 only, then setting the GUCTL1.DEV_FORCE_20_CLK_FOR_30_CLK makes
the internal 2.0(utmi/ulpi) clock to be routed as the 3.0 (pipe)
clock. Enabling this feature allows the pipe3 clock to be not-running
when forcibly operating in 2.0 device mode.

Signed-off-by: Bin Yang <yangbin@rock-chips.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
drivers/usb/dwc3/core.c | 5 +++++
drivers/usb/dwc3/core.h | 1 +
2 files changed, 6 insertions(+)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 18adddfba3da..416d83a055fe 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1167,6 +1167,11 @@ static int dwc3_core_init(struct dwc3 *dwc)
if (dwc->parkmode_disable_ss_quirk)
reg |= DWC3_GUCTL1_PARKMODE_DISABLE_SS;

+ if (DWC3_VER_IS_WITHIN(DWC3, 290A, ANY) &&
+ (dwc->maximum_speed == USB_SPEED_HIGH ||
+ dwc->maximum_speed == USB_SPEED_FULL))
+ reg |= DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK;
+
dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
}

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index eb9c1efced05..ea3ca04406bb 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -259,6 +259,7 @@
/* Global User Control 1 Register */
#define DWC3_GUCTL1_DEV_DECOUPLE_L1L2_EVT BIT(31)
#define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS BIT(28)
+#define DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK BIT(26)
#define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24)
#define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17)

--
2.25.1
\
 
 \ /
  Last update: 2022-09-17 16:15    [W:0.097 / U:2.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site