lkml.org 
[lkml]   [2022]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] hwmon: (adm1275) Allow setting sample averaging
Date
Current driver assume PWR_AVG and VI_AVG as 1 by default, and user needs to
set sample averaging via sysfs manually.

This patch parses the properties below from device tree, and setting
sample averaging during probe.

- adi,power-sample-average
- adi,volt-curr-sample-average

Signed-off-by: Potin Lai <potin.lai@quantatw.com>
---
drivers/hwmon/pmbus/adm1275.c | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)

diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
index d311e0557401..4fc1421b7540 100644
--- a/drivers/hwmon/pmbus/adm1275.c
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -83,6 +83,8 @@ enum chips { adm1075, adm1272, adm1275, adm1276, adm1278, adm1293, adm1294 };
#define ADM1278_VI_AVG_MASK GENMASK(ADM1278_VI_AVG_SHIFT + 2, \
ADM1278_VI_AVG_SHIFT)

+#define ADM1275_SAMPLES_AVG_MAX_INDEX 7
+
struct adm1275_data {
int id;
bool have_oc_fault;
@@ -475,6 +477,7 @@ static int adm1275_probe(struct i2c_client *client)
int vindex = -1, voindex = -1, cindex = -1, pindex = -1;
int tindex = -1;
u32 shunt;
+ u8 avgindex;

if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_READ_BYTE_DATA
@@ -756,6 +759,34 @@ static int adm1275_probe(struct i2c_client *client)
return -ENODEV;
}

+ if (data->have_power_sampling &&
+ of_property_read_u8(client->dev.of_node,
+ "adi,power-sample-average", &avgindex) == 0) {
+ if (avgindex > ADM1275_SAMPLES_AVG_MAX_INDEX)
+ return -EINVAL;
+ ret = adm1275_write_pmon_config(data, client, true, avgindex);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Setting power sample averaging failed with error %d",
+ ret);
+ return ret;
+ }
+ }
+
+ if (of_property_read_u8(client->dev.of_node,
+ "adi,volt-curr-sample-average",
+ &avgindex) == 0) {
+ if (avgindex > ADM1275_SAMPLES_AVG_MAX_INDEX)
+ return -EINVAL;
+ ret = adm1275_write_pmon_config(data, client, false, avgindex);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Setting voltage and current sample averaging failed with error %d",
+ ret);
+ return ret;
+ }
+ }
+
if (voindex < 0)
voindex = vindex;
if (vindex >= 0) {
--
2.17.1
\
 
 \ /
  Last update: 2022-02-24 16:45    [W:1.995 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site