Messages in this thread | | | Date | Thu, 24 Feb 2022 15:25:01 +0000 | From | Paul Cercueil <> | Subject | Re: [PATCH 2/2] pwm: jz4740: Add support for X1000 SoC |
| |
Hi,
Le jeu., févr. 24 2022 at 14:40:51 +0100, Thierry Reding <thierry.reding@gmail.com> a écrit : > On Mon, Feb 14, 2022 at 12:02:26PM +0000, Paul Cercueil wrote: >> Hi Aidan, >> >> Le mer., févr. 9 2022 at 23:11:42 +0000, Aidan MacDonald >> <aidanmacdonald.0x0@gmail.com> a écrit : >> > The X1000 has the same TCU / PWM hardware as other Ingenic SoCs, >> > but it has only 5 channels. >> > >> > Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> >> > --- >> > arch/mips/boot/dts/ingenic/x1000.dtsi | 13 +++++++++++++ >> > drivers/pwm/pwm-jz4740.c | 5 +++++ >> >> Please put the driver and device tree changes into separate patches. > > Seemed a shame not to take this, so I've manually removed the DTS > changes and applied this to the PWM tree. > > Aidan, probably best to resend the DTS snippet as a separate patch, > unless Paul also wants to apply this manually.
I am not the arch/mips/ maintainer, so a separate patch would be needed anyway, yes.
Cheers, -Paul
| |