lkml.org 
[lkml]   [2022]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] hwmon: (sch5627) Add pwmX_auto_channels_temp attributes
Date
After doing some research, i found out that Fujitsu's hardware
mointoring solution inside the SCH5627 exports data thru
registers 0xA0 - 0xA3 regarding the mapping between temperature
sensors and fans. If those registers are set to 0, the fans
are forced to full speed.
The first patch adds support for pwmX_auto_channels_temp
attributes to the hwmon core, while the second patch does
extend the sch5627 driver.

Both patches have been tested on a Fujitsu Esprimo P720.

---
Changes in v2:
- acquire mutex before doing register reads/writes

Armin Wolf (2):
hwmon: (core) Add support for pwm auto channels attribute
hwmon: (sch5627) Add pwmX_auto_channels_temp support

Documentation/hwmon/sch5627.rst | 4 +++
drivers/hwmon/hwmon.c | 1 +
drivers/hwmon/sch5627.c | 61 +++++++++++++++++++++++++++++++++
include/linux/hwmon.h | 2 ++
4 files changed, 68 insertions(+)

--
2.30.2

\
 
 \ /
  Last update: 2022-02-24 07:14    [W:0.058 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site