lkml.org 
[lkml]   [2022]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] dt-bindings: phy: qcom,qmp: Describe 'vdda-max-microamp' & 'vdda-pll-max-microamp' properties
Date
Since a few boards based on QCoM qmp phy use the
'vdda-max-microamp' & 'vdda-pll-max-microamp' properties to
describe the ufs phy nodes, add them to the dt-bindings doc as well.

This fixes the following '$ make dtbs_check' warning(s):

sm8350-microsoft-surface-duo2.dt.yaml: phy@1d87000:
'vdda-max-microamp', 'vdda-pll-max-microamp' do not match any of
the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
index 746a929c63bb..a481442c897a 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -92,6 +92,14 @@ properties:
minItems: 1
maxItems: 3

+ vdda-max-microamp:
+ description:
+ Specifies max. load that can be drawn from phy supply.
+
+ vdda-pll-max-microamp:
+ description:
+ Specifies max. load that can be drawn from pll supply.
+
vdda-phy-supply:
description:
Phandle to a regulator supply to PHY core block.
--
2.35.1
\
 
 \ /
  Last update: 2022-02-24 13:35    [W:1.707 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site