lkml.org 
[lkml]   [2022]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/6] scsi: hisi_sas: Modify v3 HW SSP underflow error processing
Date
From: Xingui Yang <yangxingui@huawei.com>

In case of SSP underflow allow the response frame IU to be examined for
setting the response stat value rather than always setting
SAS_DATA_UNDERRUN.

This will mean that we call sas_ssp_task_response() in those scenarios
and may send sense data to upper layer.

Such a condition would be for bad blocks were we just reporting an
underflow error to upper layer, but now the sense data will tell
immediately that the media is faulty.

Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 39 +++++++++++++++++---------
1 file changed, 26 insertions(+), 13 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index ad3e2db0f520..914ae4e82f5e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -406,6 +406,8 @@
#define CMPLT_HDR_ERROR_PHASE_MSK (0xff << CMPLT_HDR_ERROR_PHASE_OFF)
#define CMPLT_HDR_RSPNS_XFRD_OFF 10
#define CMPLT_HDR_RSPNS_XFRD_MSK (0x1 << CMPLT_HDR_RSPNS_XFRD_OFF)
+#define CMPLT_HDR_RSPNS_GOOD_OFF 11
+#define CMPLT_HDR_RSPNS_GOOD_MSK (0x1 << CMPLT_HDR_RSPNS_GOOD_OFF)
#define CMPLT_HDR_ERX_OFF 12
#define CMPLT_HDR_ERX_MSK (0x1 << CMPLT_HDR_ERX_OFF)
#define CMPLT_HDR_ABORT_STAT_OFF 13
@@ -2140,7 +2142,7 @@ static irqreturn_t fatal_axi_int_v3_hw(int irq_no, void *p)
return IRQ_HANDLED;
}

-static void
+static bool
slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task,
struct hisi_sas_slot *slot)
{
@@ -2158,6 +2160,15 @@ slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task,
switch (task->task_proto) {
case SAS_PROTOCOL_SSP:
if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) {
+ /*
+ * If returned response frame is incorrect because of data underflow,
+ * but I/O information has been written to the host memory, we examine
+ * response IU.
+ */
+ if (!(complete_hdr->dw0 & CMPLT_HDR_RSPNS_GOOD_MSK) &&
+ (complete_hdr->dw0 & CMPLT_HDR_RSPNS_XFRD_MSK))
+ return false;
+
ts->residual = trans_tx_fail_type;
ts->stat = SAS_DATA_UNDERRUN;
} else if (dw3 & CMPLT_HDR_IO_IN_TARGET_MSK) {
@@ -2189,6 +2200,7 @@ slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task,
default:
break;
}
+ return true;
}

static void slot_complete_v3_hw(struct hisi_hba *hisi_hba,
@@ -2262,19 +2274,20 @@ static void slot_complete_v3_hw(struct hisi_hba *hisi_hba,
if ((dw0 & CMPLT_HDR_CMPLT_MSK) == 0x3) {
u32 *error_info = hisi_sas_status_buf_addr_mem(slot);

- slot_err_v3_hw(hisi_hba, task, slot);
- if (ts->stat != SAS_DATA_UNDERRUN)
- dev_info(dev, "erroneous completion iptt=%d task=%pK dev id=%d addr=%016llx CQ hdr: 0x%x 0x%x 0x%x 0x%x Error info: 0x%x 0x%x 0x%x 0x%x\n",
- slot->idx, task, sas_dev->device_id,
- SAS_ADDR(device->sas_addr),
- dw0, dw1, complete_hdr->act, dw3,
- error_info[0], error_info[1],
- error_info[2], error_info[3]);
- if (unlikely(slot->abort)) {
- sas_task_abort(task);
- return;
+ if (slot_err_v3_hw(hisi_hba, task, slot)) {
+ if (ts->stat != SAS_DATA_UNDERRUN)
+ dev_info(dev, "erroneous completion iptt=%d task=%pK dev id=%d addr=%016llx CQ hdr: 0x%x 0x%x 0x%x 0x%x Error info: 0x%x 0x%x 0x%x 0x%x\n",
+ slot->idx, task, sas_dev->device_id,
+ SAS_ADDR(device->sas_addr),
+ dw0, dw1, complete_hdr->act, dw3,
+ error_info[0], error_info[1],
+ error_info[2], error_info[3]);
+ if (unlikely(slot->abort)) {
+ sas_task_abort(task);
+ return;
+ }
+ goto out;
}
- goto out;
}

switch (task->task_proto) {
--
2.26.2
\
 
 \ /
  Last update: 2022-02-24 12:58    [W:0.120 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site