lkml.org 
[lkml]   [2022]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH V2] remoteproc: support self recovery after rproc crash
Date
> Subject: Re: [PATCH V2] remoteproc: support self recovery after rproc crash
>
> Hi Peng,
>
> On 2/14/22 19:41, Arnaud POULIQUEN wrote:
> > Hi Peng,
> >
> > On 1/26/22 09:51, Peng Fan (OSS) wrote:
> >> From: Peng Fan <peng.fan@nxp.com>
> >>
> >> Current logic only support main processor to stop/start the remote
> >> processor after rproc crash. However to SoC, such as i.MX8QM/QXP, the
> >> remote processor could do self recovery after crash and trigger
> >> watchdog reboot. It does not need main processor to load image,
> >> stop/start M4 core.
> >
> >
> > On stm32mp1 platform the remote processor watchdog generates an early
> > interrupt that could be used to detach and reattach before the reset of the
> remote processor.
> > I need to test race condition,but I suppose that this should works if
> > the resource table is not reinitialized by the remote processor firmware.
> >
> > Another option for the stm32mp1 is that remoteproc manages the reset
> > of the remote processor.
> > For instance this allows to save a core-dump before manually resetting
> > the remote processor.
> > But looks like this use case can be handled later, as mentioned below.
> >
> >>
> >> This patch add a new flag to indicate whether the SoC has self
> >> recovery capability. And introduce two functions:
> >> rproc_self_recovery, rproc_assisted_recovery for the two cases.
> >> Assisted recovery is as before, let main processor to help recovery,
> >> while self recovery is recover itself withou help. To self recovery,
> >> we only do detach and attach.
> >
> >
> >>
> >> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> >> ---
> >>
> >> V2:
> >> Nothing change in V2.
> >> Only move this patch out from
> >>
> >> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpat
> >>
> chwork.kernel.org%2Fproject%2Flinux-remoteproc%2Flist%2F%3Fseries%3D
> 6
> >>
> 04364&amp;data=04%7C01%7Cpeng.fan%40nxp.com%7C3d617c5ddb8c42b
> 315f808d
> >>
> 9f79f2ac7%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6378130
> 8526949
> >>
> 0105%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2lu
> MzIiLCJB
> >>
> TiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&amp;sdata=VKKrqOnFz%2BoXjr%2
> FGMKpm4
> >> yyqmRfApeYY0l2V8A0yy4Y%3D&amp;reserved=0
> >>
> >> drivers/remoteproc/remoteproc_core.c | 66
> ++++++++++++++++++++--------
> >> include/linux/remoteproc.h | 2 +
> >> 2 files changed, 49 insertions(+), 19 deletions(-)
> >>
> >> diff --git a/drivers/remoteproc/remoteproc_core.c
> >> b/drivers/remoteproc/remoteproc_core.c
> >> index 69f51acf235e..4bd5544dab8f 100644
> >> --- a/drivers/remoteproc/remoteproc_core.c
> >> +++ b/drivers/remoteproc/remoteproc_core.c
> >> @@ -1887,6 +1887,49 @@ static int __rproc_detach(struct rproc *rproc)
> >> return 0;
> >> }
> >>
> >> +static int rproc_self_recovery(struct rproc *rproc) {
> >> + int ret;
> >> +
> >> + mutex_unlock(&rproc->lock);
> >> + ret = rproc_detach(rproc);
> >> + mutex_lock(&rproc->lock);
> >> + if (ret)
> >> + return ret;
> >
> > Here we would want to perform a core dump and manually reset the
> > co-processor.
> > I suppose that a new rproc ops could be called here in a next step.
> >
> >> +
> >> + if (atomic_inc_return(&rproc->power) > 1)
> >> + return 0;
> >
> > Do you identify a use case that needs to test rproc->power to skip the
> > attach?
> > If yes could you add a comment to describe it?
> >
> >> + return rproc_attach(rproc);
> >> +}
> >> +
> >> +static int rproc_assisted_recovery(struct rproc *rproc) {
> >> + const struct firmware *firmware_p;
> >> + struct device *dev = &rproc->dev;
> >> + int ret;
> >> +
> >> + ret = rproc_stop(rproc, true);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + /* generate coredump */
> >> + rproc->ops->coredump(rproc);
> >> +
> >> + /* load firmware */
> >> + ret = request_firmware(&firmware_p, rproc->firmware, dev);
> >> + if (ret < 0) {
> >> + dev_err(dev, "request_firmware failed: %d\n", ret);
> >> + return ret;
> >> + }
> >> +
> >> + /* boot the remote processor up again */
> >> + ret = rproc_start(rproc, firmware_p);
> >> +
> >> + release_firmware(firmware_p);
> >> +
> >> + return ret;
> >> +}
> >> +
> >> /**
> >> * rproc_trigger_recovery() - recover a remoteproc
> >> * @rproc: the remote processor
> >> @@ -1901,7 +1944,6 @@ static int __rproc_detach(struct rproc *rproc)
> >> */
> >> int rproc_trigger_recovery(struct rproc *rproc) {
> >> - const struct firmware *firmware_p;
> >> struct device *dev = &rproc->dev;
> >> int ret;
> >>
> >> @@ -1915,24 +1957,10 @@ int rproc_trigger_recovery(struct rproc
> >> *rproc)
> >>
> >> dev_err(dev, "recovering %s\n", rproc->name);
> >>
> >> - ret = rproc_stop(rproc, true);
> >> - if (ret)
> >> - goto unlock_mutex;
> >> -
> >> - /* generate coredump */
> >> - rproc->ops->coredump(rproc);
> >> -
> >> - /* load firmware */
> >> - ret = request_firmware(&firmware_p, rproc->firmware, dev);
> >> - if (ret < 0) {
> >> - dev_err(dev, "request_firmware failed: %d\n", ret);
> >> - goto unlock_mutex;
> >> - }
> >> -
> >> - /* boot the remote processor up again */
> >> - ret = rproc_start(rproc, firmware_p);
> >> -
> >> - release_firmware(firmware_p);
> >> + if (rproc->self_recovery)
> >> + ret = rproc_self_recovery(rproc);
> >
> > If some platforms have to manually reset the remote processor (without
> > reloading the firmware) the name could not be relevant...
> >
> > Following comments are only suggestions that needs to be commented by
> > maintainers
> >
> > What about rproc_attach_recovery ?
> >
> >> + else
> >> + ret = rproc_assisted_recovery(rproc);
> >
> > and rproc_firmware_recovery ?
> >
> >
> >>
> >> unlock_mutex:
> >> mutex_unlock(&rproc->lock);
> >> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> >> index e0600e1e5c17..b32ef46f8aa4 100644
> >> --- a/include/linux/remoteproc.h
> >> +++ b/include/linux/remoteproc.h
> >> @@ -529,6 +529,7 @@ struct rproc_dump_segment {
> >> * @elf_machine: firmware ELF machine
> >> * @cdev: character device of the rproc
> >> * @cdev_put_on_release: flag to indicate if remoteproc should be
> >> shutdown on @char_dev release
> >> + * @self_recovery: flag to indicate if remoteproc support self
> >> + recovery
> >> */
> >> struct rproc {
> >> struct list_head node;
> >> @@ -568,6 +569,7 @@ struct rproc {
> >> u16 elf_machine;
> >> struct cdev cdev;
> >> bool cdev_put_on_release;
> >> + bool self_recovery;
> >
> > This bool seems needed because we have lost the previous state before
> crash.
> > I wonder if a new rproc->state such as RPROC_REBOOT could avoid this
> boolean.
> >
> >
> > I will try to test you patch on stm32mp1 next week
>
> I performed few tests on the stm32mp1 with your patch.
> Thanks to the resetting of the resource tables on detachment, this works
> quite well.

Thanks very much for you testing this patch. I'll try to address your
previous comments and send out v3.

Thanks,
Peng.

>
> Regards,
> Arnaud
>
> >
> > Regards,
> > Arnaud
> >
> >> };
> >>
> >> /**

\
 
 \ /
  Last update: 2022-02-25 03:11    [W:0.648 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site