lkml.org 
[lkml]   [2022]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v9 01/11] PCI/VGA: Move vgaarb to drivers/pci
Date
From: Bjorn Helgaas <bhelgaas@google.com>

The VGA arbiter is really PCI-specific and doesn't depend on any GPU
things. Move it to the PCI subsystem.

Note that misc_init() must be called before vga_arb_device_init(). These
are both subsys_initcalls, so this ordering depends on the link order,
which is determined by drivers/Makefile:

obj-y += pci/
obj-y += char/ <-- misc_init()
obj-y += gpu/ <-- vga_arb_device_init() (before this commit)

The drivers/pci/ subsys_initcalls are called *before* misc_init(), so
convert vga_arb_device_init() to subsys_initcall_sync(), which is called
after *all* subsys_initcalls.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/gpu/vga/Kconfig | 19 -------------------
drivers/gpu/vga/Makefile | 1 -
drivers/pci/Kconfig | 19 +++++++++++++++++++
drivers/pci/Makefile | 1 +
drivers/{gpu/vga => pci}/vgaarb.c | 2 +-
5 files changed, 21 insertions(+), 21 deletions(-)
rename drivers/{gpu/vga => pci}/vgaarb.c (99%)

diff --git a/drivers/gpu/vga/Kconfig b/drivers/gpu/vga/Kconfig
index 1ad4c4ef0b5e..eb8b14ab22c3 100644
--- a/drivers/gpu/vga/Kconfig
+++ b/drivers/gpu/vga/Kconfig
@@ -1,23 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
-config VGA_ARB
- bool "VGA Arbitration" if EXPERT
- default y
- depends on (PCI && !S390)
- help
- Some "legacy" VGA devices implemented on PCI typically have the same
- hard-decoded addresses as they did on ISA. When multiple PCI devices
- are accessed at same time they need some kind of coordination. Please
- see Documentation/gpu/vgaarbiter.rst for more details. Select this to
- enable VGA arbiter.
-
-config VGA_ARB_MAX_GPUS
- int "Maximum number of GPUs"
- default 16
- depends on VGA_ARB
- help
- Reserves space in the kernel to maintain resource locking for
- multiple GPUS. The overhead for each GPU is very small.
-
config VGA_SWITCHEROO
bool "Laptop Hybrid Graphics - GPU switching support"
depends on X86
diff --git a/drivers/gpu/vga/Makefile b/drivers/gpu/vga/Makefile
index e92064442d60..9800620deda3 100644
--- a/drivers/gpu/vga/Makefile
+++ b/drivers/gpu/vga/Makefile
@@ -1,3 +1,2 @@
# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_VGA_ARB) += vgaarb.o
obj-$(CONFIG_VGA_SWITCHEROO) += vga_switcheroo.o
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index d98fafdd0f99..133c73207782 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -252,6 +252,25 @@ config PCIE_BUS_PEER2PEER

endchoice

+config VGA_ARB
+ bool "VGA Arbitration" if EXPERT
+ default y
+ depends on (PCI && !S390)
+ help
+ Some "legacy" VGA devices implemented on PCI typically have the same
+ hard-decoded addresses as they did on ISA. When multiple PCI devices
+ are accessed at same time they need some kind of coordination. Please
+ see Documentation/gpu/vgaarbiter.rst for more details. Select this to
+ enable VGA arbiter.
+
+config VGA_ARB_MAX_GPUS
+ int "Maximum number of GPUs"
+ default 16
+ depends on VGA_ARB
+ help
+ Reserves space in the kernel to maintain resource locking for
+ multiple GPUS. The overhead for each GPU is very small.
+
source "drivers/pci/hotplug/Kconfig"
source "drivers/pci/controller/Kconfig"
source "drivers/pci/endpoint/Kconfig"
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 37be95adf169..0da6b1ebc694 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_PCI_PF_STUB) += pci-pf-stub.o
obj-$(CONFIG_PCI_ECAM) += ecam.o
obj-$(CONFIG_PCI_P2PDMA) += p2pdma.o
obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o
+obj-$(CONFIG_VGA_ARB) += vgaarb.o

# Endpoint library must be initialized before its users
obj-$(CONFIG_PCI_ENDPOINT) += endpoint/
diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/pci/vgaarb.c
similarity index 99%
rename from drivers/gpu/vga/vgaarb.c
rename to drivers/pci/vgaarb.c
index 569930552957..8320385a487b 100644
--- a/drivers/gpu/vga/vgaarb.c
+++ b/drivers/pci/vgaarb.c
@@ -1564,4 +1564,4 @@ static int __init vga_arb_device_init(void)
pr_info("loaded\n");
return rc;
}
-subsys_initcall(vga_arb_device_init);
+subsys_initcall_sync(vga_arb_device_init);
--
2.25.1
\
 
 \ /
  Last update: 2022-02-24 23:49    [W:0.083 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site