lkml.org 
[lkml]   [2022]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v3 1/4] dt-bindings: opp: Add "opp-microwatt" entry in the OPP
    Date
    Add new entry for the OPP which provides information about power
    expressed in micro-Watts. It is useful for the Energy Model framework.

    Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
    ---
    .../devicetree/bindings/opp/opp-v2-base.yaml | 15 +++++++++++++++
    1 file changed, 15 insertions(+)

    diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
    index 15a76bcd6d42..433164186a98 100644
    --- a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
    +++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
    @@ -93,6 +93,21 @@ patternProperties:
    minItems: 1
    maxItems: 8 # Should be enough regulators

    + opp-microwatt:
    + description: |
    + The power for the OPP in micro-Watts.
    +
    + Entries for multiple regulators shall be provided in the same field
    + separated by angular brackets <>. If current values aren't required
    + for a regulator, then it shall be filled with 0. If power values
    + aren't required for any of the regulators, then this field is not
    + required. The OPP binding doesn't provide any provisions to relate the
    + values to their power supplies or the order in which the supplies need
    + to be configured and that is left for the implementation specific
    + binding.
    + minItems: 1
    + maxItems: 8 # Should be enough regulators
    +
    opp-level:
    description:
    A value representing the performance level of the device.
    --
    2.17.1
    \
     
     \ /
      Last update: 2022-02-24 09:14    [W:3.517 / U:0.536 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site