lkml.org 
[lkml]   [2022]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [v2 1/2] clk: qcom: gdsc: Add support to update GDSC transition delay
From
Date
Quoting Taniya Das (2022-02-23 10:56:05)
> GDSCs have multiple transition delays which are used for the GDSC FSM
> states. Older targets/designs required these values to be updated from
> gdsc code to certain default values for the FSM state to work as
> expected. But on the newer targets/designs the values updated from the
> GDSC driver can hamper the FSM state to not work as expected.
>
> On SC7180 we observe black screens because the gdsc is being
> enabled/disabled very rapidly and the GDSC FSM state does not work as
> expected. This is due to the fact that the GDSC reset value is being
> updated from SW.
>
> Thus add support to update the transition delay from the clock
> controller gdscs as required.
>
> Fixes: 45dd0e55317cc ("clk: qcom: Add support for GDSCs)
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> ---

Looks like I need to apply this for clk-fixes. Please keep Bjorn on Cc
next time for awareness.

\
 
 \ /
  Last update: 2022-02-24 22:55    [W:0.444 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site