Messages in this thread | | | Date | Thu, 24 Feb 2022 13:44:00 -0600 | From | Bjorn Andersson <> | Subject | Re: [PATCH] ARM: dts: qcom: Add chosen node information for SDX65. |
| |
On Fri 11 Feb 04:20 CST 2022, Rohit Agarwal wrote:
> Add chosen node in the base dtsi file of SDX65. >
While this happens to be the same on most boards, it is still a board-specific decision which UART is the debug uart, or if there is one at all...
So this property should remain in the dts.
Thanks, Bjorn
> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> > --- > arch/arm/boot/dts/qcom-sdx65-mtp.dts | 4 ---- > arch/arm/boot/dts/qcom-sdx65.dtsi | 4 ++++ > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts > index 59457da..3a75c21 100644 > --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts > +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts > @@ -14,10 +14,6 @@ > aliases { > serial0 = &blsp1_uart3; > }; > - > - chosen { > - stdout-path = "serial0:115200n8"; > - }; > }; > > &blsp1_uart3 { > diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi > index 796641d..653df15 100644 > --- a/arch/arm/boot/dts/qcom-sdx65.dtsi > +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi > @@ -17,6 +17,10 @@ > qcom,msm-id = <458 0x10000>, <483 0x10000>, <509 0x10000>; > interrupt-parent = <&intc>; > > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > memory { > device_type = "memory"; > reg = <0 0>; > -- > 2.7.4 >
| |