lkml.org 
[lkml]   [2022]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [[PATCH v2 1/2] dt-bindings: opp: Add 'opp-microwatt' entry in the OPP
On 22-02-22, 14:07, Lukasz Luba wrote:
> Add new entry for the OPP which provides information about power
> expressed in micro-Watts. It is useful for the Energy Model framework.
>
> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
> ---
> Documentation/devicetree/bindings/opp/opp-v2-base.yaml | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
> index 15a76bcd6d42..3f07a279ed2a 100644
> --- a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
> +++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
> @@ -93,6 +93,13 @@ patternProperties:
> minItems: 1
> maxItems: 8 # Should be enough regulators
>
> + opp-microwatt:
> + description:
> + Power for the OPP
> +
> + A value representing power for the OPP in micro-Watts.
> + $ref: /schemas/types.yaml#/definitions/uint32
> +

I was expecting a much larger change here. Look at how opp-microvolt and
opp-microamp is defined in this file.

Should this value be made per-supply/regulator, just like voltage/current ?

> opp-level:
> description:
> A value representing the performance level of the device.

--
viresh

\
 
 \ /
  Last update: 2022-02-23 06:50    [W:0.105 / U:0.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site